Users Manual Part 3

ManualsBrandsSOCOMEC ManualsElectronicsMultipoint Display

66 EN

DIRIS Digiware D-50 & D-70 - 548088C - SOCOMEC

Annex II - 5. BACnet conguration from the embedded webserver

Click on the “Wrench” icon on the top left corner and click on “Protocols”:

Click on the “Field protocols” tab, and under “Communication”, then BACnet, enter BACnet settings:

BACnet activation: activate or disable BACnet IP communication from the D-50/D-70 display.

Virtual Network ID: set the virtual Network ID of the D-50/D-70 display. It must be unique within the BACnet network.

Main instance ID: set the main Instance ID (100 by default) for the D-50/D-70 display. It must be unique within the BACnet

network.

Summary of content (7 pages)

PAGE 1
Annex II - 5. BACnet configuration from the embedded webserver Click on the “Wrench” icon on the top left corner and click on “Protocols”: Click on the “Field protocols” tab, and under “Communication”, then BACnet, enter BACnet settings: BACnet activation: activate or disable BACnet IP communication from the D-50/D-70 display. Virtual Network ID: set the virtual Network ID of the D-50/D-70 display. It must be unique within the BACnet network.
PAGE 2
Annex III. FTP CONFIGURATION Annex III - 1. FTP file export protocol (only available with DIRIS Digiware D-70) Measurement logs (see “4.2.2. Introduction to DIRIS Digiware D-70”, page 9) can be automatically exported via FTP(S). Annex III - 1.1. FTP server activation: Connect to the web server and go to the “Protocols” menu: Click on “Data Push”. Authentication part: Site Name & Server Name: used to identify from which DIRIS Digiware D-50/D-70 the files are being exported.
PAGE 3
Data logger part: Server: activate the FTP server to enable the automatic export of data to a remote FTP server. Destination folder: tree view of the FTP server folder in which you want to export the files. Upload Log files: activate this to have additional information for troubleshooting in case of an export issue. FTP Server: This contains the login details of the FTP server (standard or secure).
PAGE 4
Annex III - 2. FTP planning configuration Click on “Devices”: Click on “Modify active configuration” (1) Click on “Planning” (2) Activate the type of data you want to export automatically. The DIRIS Digiware D-70 can log and export 3 types of data: Enegies Index: Ea, Er, Es etc. (Meters) Measurement logs/trends: archived parameters U, I, F, PF etc. (Measurements) Load curves / demand: P, Q, S etc.
PAGE 5
Annex III - 3. Understanding the exported .csv file in EMS mode The csv file is split into two parts: • The part (1) in red corresponds to the header. It contains a unique key, created out of multiple parameters such as the the site and server name, the data type, the data ID, the device ID to uniquely identify each parameter that is exported. • The part (2) in green contains the logged and time stamped measurements.
PAGE 6
DIRIS Digiware D-50 & D-70 - 548088C - SOCOMEC EN 71
PAGE 7
CORPORATE HQ CONTACT: SOCOMEC SAS 1-4 RUE DE WESTHOUSE 67235 BENFELD, FRANCE www.socomec.