Cordless Serial Adapter User Guide Cordless Serial Adapter User Guide Revision 0.95 September 22, 2003 September 22, 2003September 22, 2003 September 22, 2003 Document#: 6410-00000 A Copyright © 2002 Socket Communications, Inc. CONFIDENTIAL Revision 0.
Cordless Serial Adapter User Guide Reproduction of the contents of this manual without the permission of Socket Communications, Inc. is expressly prohibited. Please be aware that the products described in this manual may change without notice. This manual has been prepared with the greatest care regarding its contents. However, in the event that it contains omissions, errors or any other misinformation, please feel free to direct comments to: Socket Communications, Inc.
Cordless Serial Adapter User Guide Regulatory Compliance The Socket Bluetooth module is designed to be compliant with the rules and regulations in locations where they are sold and will be labeled as required. This product is type approved — users are not required to obtain license or authorization before using. Radio Frequency Interference Requirements This device complies with part 15 of the FCC rules.
Cordless Serial Adapter User Guide U.S. Regulatory Wireless Notice This product emits radio frequency energy, but the radiated output power of this device is far below the FCC radio frequency exposure limits. Nevertheless, the device should be used in such a manner that the potential for human contact with the antenna during normal operation is minimized.
Cordless Serial Adapter User Guide European Union Notice 0682 Products bearing the CE marking comply with the R&TTE Directive (1999/5/EC), EMC Directive (89/336/EEC), and the Low Voltage Directive (73/23/EEC) issued by the Commission of the European Community.
Cordless Serial Adapter User Guide Revision Table Revision 0.95 Date Who Comments 10-Sep-2003 C. Ader Extract user guide from specification September 22, 2003 Document#: 6410-00000 A Copyright © 2003, Socket Communications, Inc. CONFIDENTIAL Page v Revision 0.
Cordless Serial Adapter User Guide Table of Contents 1. Introduction ........................................................................................................................................ 1 1.1 Product definition ............................................................................................................................ 1 1.2 Feature List ......................................................................................................................................
Cordless Serial Adapter September 22, 2003 Document#: 6410-00000 A User Guide Copyright © 2003, Socket Communications, Inc. CONFIDENTIAL Page vii Revision 0.
Cordless Serial Adapter User Guide List of Tables Table 1: DC Voltage Levels ......................................................................................................................... 2 Table 2: Power Consumption........................................................................................................................ 2 Table 3: DTE Pin Assignment ......................................................................................................................
Cordless Serial Adapter 1. User Guide Introduction 1.1 Product definition In the CSA product line there will be two versions: Cordless Serial Adapter – External Power - Provide a basic Serial Cable replacement function with some user accessible command modes 1.2 Feature List • Very small size • Low Cost • External Power device runs off 3.
Cordless Serial Adapter 2 User Guide Operational Specifications 2.1 Operating Range 10 meters at T=25ºC, open office conditions 2.2 Electrical Requirements DC voltage levels Vcc = 5 volts ±10% Minimum Maximum VIH Description High level input voltage 2.0 V 12V VIL Low level input voltage -12 V 0.8 V VOH High level output voltage* 3V ------- VOL Low level output voltage* ------ -3 V Table 1: DC Voltage Levels 2.3 Power Consumption Expect ±10% variation over temperature.
Cordless Serial Adapter 3 3.1 User Guide Hardware Interface CSA Pin Assignments The pin assignments are per the DB9 RS-232 convention but offer some options for nonstandard configurations.
Cordless Serial Adapter 4 User Guide Hardware Interface Protocol 4.1 Initialization status Module pin 4 (PIO_1) is used as a status indicator. This line is LOW (zero) indicates that the module has not completed initialization. This line HIGH (one) indicates that the module has completed its initialization and is ready to accept commands or Bluetooth connections. 4.2 Connection enable Module pin 9, serial pin 6, (PIO_3), is used to enable the module’s connectability and discoverability.
Cordless Serial Adapter 5 5.1 User Guide Mechanical Specifications Dimensions Length 65mm Width 35mm Height 17mm 5.2 Weight 25 grams 5.3 Housing Material ABS and Polycarbonate (50/50) combination material. 5.4 6 6.
Cordless Serial Adapter 6.3 User Guide Vibration The unit shall withstand a sinusoidal vibration of 2Gs along each of the 3 mutually perpendicular axes for a period of 1 hour per axis, over a frequency range of 5 Hz to 2,000 Hz. Conditions: No degradation of functional performance. No loose internal components. 6.4 Connector Insertion Durability The unit will continue to function after 5,000 insertions. 6.5 ESD Meet the following criteria using measuring method based on IEC61000-4-2 6.5.
Cordless Serial Adapter 7 User Guide Software functionality 7.1 Bluetooth Profiles/Software GAP, SDP, SPP Separate programming application to allow a user to manually configure: • baud rate • stop bits • parity • flow control The application needs to run on 98SE, 2000, XP and Windows Pocket PC 2002 & Pocket PC 2003 Cordless Adapter would need to be attached to the serial port of the notebook or desktop running the programming application.
Cordless Serial Adapter User Guide 10 Packaging 10.1 Accessory Item(s) to be included in final package • US AC power supply (includes 2 European and one Australian power connectors) September 22, 2003 Document#: 6410-00000 A Copyright © 2003, Socket Communications, Inc. CONFIDENTIAL Page 8 Revision 0.