User Manual CORDLESS IMPACT WRENCH BBT-POB06 Please scan the QR CODE for more services. support@snapfreshtools.com +1 833 635 0955 Read all safety rules and instructions carefully before operating this tool.
CONTENTS Contents .......................................................................................................................................................................................... 2 Symbols ............................................................................................................................................................................................... 3 Safety instructions ...................................................................................
SYMBOLS The rating plate on your tool and the manual cover may show certain symbols. These represent important information about the product or instructions on its use. Hearing, sight and respiratory protection must be worn. Read the manual carefully before use. Double insulated for additional protection. 1h charging time. Conforms to relevant safety standards. Short-circuit proof safety isolating transformer. 130℃ thermal fuse. Do not expose the battery pack to heat in excess of 40℃.
SAFETY INSTRUCTIONS Read the enclosed safety warnings, the additional safety warnings and the instructions. Failure to follow the safety warnings and the instructions may result in electric shock, fire and/or serious injury. Save the safety warnings and the instructions for future reference. GENERAL POWER TOOL SAFETY WARNINGS WARNING! Read all safety warnings and all instructions. Failure to follow the warning and instructions may result in electric shock, fire and/or serious injury.
. Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or . . . . . battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents. Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. Do not overreach.
. Do not use a battery pack or tool that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behaviour resulting in fire, explosion or risk of injury. . Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or temperature above 130 °C may cause explosion. NOTE The temperature “130 °C” can be replaced by the temperature “265 °F”. .
ADDITIONAL SAFETY RULES FOR CHARGERS . Before using the charger, read all instructions and cautionary markings on the charger and battery pack as well as the instructions on using the battery pack. . Only charge your batteries indoors as the charger is designed for indoor use only. . DANGER. If the battery pack is cracked damaged in any other way, do not insert it in the charger. There is a danger of electric shock or electrocution. . WARNING. Do not allow any liquid to come into contact with the charger.
MACHINE INFORMATION COMPONENTS AND CONTROLS 1. 1/2” chuck 2. Forward/reverse knob 3. Handle 4. On/off switch 5. LED work light 6. Belt clip 7. Battery pack ( not supplied) 8.
TECHNICAL SPECIFICATION Model No. BBT-POB06 Model Number BBT-DC20A Rated voltage 20V Battery type Lithium-ion No load speed 0-2300 rpm Voltage 20V Impact rate 0-3200 bpm Capacity 2.0 Ah Max torque 280 Nm Recommended charger BBT-YFT20V Weight 0.3 kg Drive 1/2" hex chuck Includes LED light, soft grip, variable speed and electric brake. Model Number BBT-YFT20V Charger input 100-120V~60Hz 65W Sound pressure level LpA: 91.
Selecting the correct 1/2” socket . Always use the correct size socket. Use only 1/2” wrench socket as shown blow, and move toward the head of the wrench and stop when you hear a snap sound. . Pull hard in the opposite direction to remove the bit. 1/2” socket Switching on/off The wrench is started and stopped by depressing and releasing the ON/OFF switch trigger. Switch lock . The switch trigger can be locked in the center position. .
LED light The LED work-light can light prior to motor running if you press the switch lightly, which keeps the work area to be lighted for checking clearly at first, and it lights also during your operation. WARNING: Do not stare directly at the light beam. Never aim the beam at any person or any object other than the workpiece. WARNING: Do not deliberately aim the beam at personnel and ensure that it is not directed towards the eye of a person for longer than 0.25s. MAINTENANCE .
WARRANTY Ningbo Babytec Technology Co., Ltd (Hereinafter referred to as Babytec) warrants this product against defects in materials and/or workmanship under normal use for a period of ONE (1) YEAR from the date of purchase by the original purchaser(’Warranty Period’).