Instructions / Assembly

ADD PRIVACY AND HEIGHT TO ANY EXISTING CONCRETE WALL WITH OUR

STYLISH AND DURABLE

16” X 24’ Lattice Trailer Skirt-HardMount

Instructions:

1)First lay out all your rails and attach the rail connectors to all your rails, except two.

Leaving 2 rails for last in case you need to make cuts to your rails to adjust for space.

Make sure rail connectors are all facing the same directionally when attaching.

2)Attach posts to base mounts.

3)Attach post caps to posts and secure by firmly tapping with a rubber mallet.

4)Place and anchor first base mount with concrete crews and anchors (not provided).

5)Then snap in rails and line up next base mount and secure, continuing until finished

Sawing the last rails if necessary.

6)Screw Lattice to rail and posts (8 screws per 4ft. recommended)

7)Screw rail connectors to posts.

SNAPFENCE 24' TRAILER SKIRT PARTS LIST

TSS16X24BM

15.33" VERTICALS

VERTICAL CAPS

BASE MOUNTS

46" RAILS

RAIL CONNECTORS

SCREWS (50) CT.

LATTICE (12" x 48")

CORNER RAIL CONNECTORS

*Concrete Anchors & Screws needed for permanent installation. Not included

PAGE 1
ADD PRIVACY AND HEIGHT TO ANY EXISTING CONCRETE WALL WITH OUR STYLISH AND DURABLE 16” X 24’ Lattice Trailer Skirt-HardMount Instructions: 1)First lay out all your rails and attach the rail connectors to all your rails, except two. Leaving 2 rails for last in case you need to make cuts to your rails to adjust for space. Make sure rail connectors are all facing the same directionally when attaching. 2)Attach posts to base mounts. 3)Attach post caps to posts and secure by firmly tapping with a rubber mallet.