Instructions / Assembly

Directions for constructing your SnapFence
TM
Extension Kit.
IF YOU CAN DREAM IT, YOU CAN BUILD IT.
Extension Kit
Instructions
1
1) Unpack box and separate parts.
Solid Mount:
2) Measure 48” from center of installed SnapFence
TM
post to
center of post to be added.
Attach post to base mount with screws. Secure base mount to existing
solid surface using holes provided.
Note - use a larger type of screw or bolt as needed to secure to solid surfaces.
3) Attach rail connectors to each end of rails (46”).
4) Snap rail sections onto posts (16”). Measure and move rails to desired levels. Secure with screws on both ends.
5) Push on post caps. Attach with PVC glue if desired.
* Finish with pre-cut Lattice SnapPanels
TM
(sold seperately ). Continue to add to more extension kits to your SnapFence
TM
system.
A
B
Plan view of extension.
Secure with PVC glue if
desired.
Use corner rail connectors if making fence turn a corner.
Soil Mount:
2) Drive anchor stake at 48” from center of installed
SnapFence
TM
post to center of post to be added.
Soil
48”
Attach post to
anchor stake
with screws.
Solid
48”
Secure base with larger
screws/bolts as needed.
OR
Added post can be in line with the installed section of fence (A)
or at a right angle to make a corner (B). (See above plan view.)
>You will have (1) 16” Post, (1) Base Mount & (1) Post Cap leftover
if using with a pre-existing SnapFence system.
Visit: www.snap-
fence.com for more
How-To help. Scan the
QR code to take you
directly to useful
SnapFence tips.
Secure with PVC glue if desired.
Part Number: FTEK-16x4L
Fence Topper Extension Kit Lattice Panel
Anchor stakes
sold separately.
Note: Extension Kits are designed to be added to an existing Starter Kit #FTSK-16x8L
(2) 16” Posts
(2) 46” Rails
(4)
Rail
Connectors
(1)
Bag of
Screws
(2)
Post
Caps
(2)
Base
Mounts
(2)
Corner Rail
Connectors
(2)
Anchor
Stakes
Measure and move
rails to desired levels.
Secure with screws
on both ends.
*Finish with pre-cut lattice panels (sold seperately).
Attach lattice with provided screws.
Screw directly through lattice panel.