Content 1. After-sales Contact information 0 2. Safety Caution 3. Package Contents 4, Camera System installation 4.1 Preparation for setup 4.2 installing a hard drive — 4.2.1 How to format the hard drive and check its information? 3 4.3 System connection 5. Password 5.1 Password Management 5.2 Password Modification 6. Network Connection 7. Video Recording 71 scheduled Recording 7.2 Motion Activated Recording 7.3 Manual recording 7.4 Record Mode 8. Video Playback 8.
14. Viewing on PC by VMS software 24 14.1 Playback on the software 15. Other Functions 16. Frequently Asked Questions 16.1 what Is the working temperature of Security Cameras? 26 16.2 How to adjust the Date and Time? — — 16.3 What should | do when Hard Drive Not Found? 26 16.4 How to match the new camera to the NVR? 16.5 what should | do when camera does not work or camera offline? 27 16.6 How to restore the unit? 28 16.7 Face Detection 28 16.8 What to do if nothing comes up on the monitor screen? 28 16.
1. after-sales Contact information E-MAIL: SMONETEMMLLXX.COM USA: (866) 710-5666 CANADA: (888) 792-5254 2. Safety Caution A.Please do not put any fluid container on the product. B.Please use the product in ventilated environment and prevent blocking the vents, C.Please use the product under its standard working temperature. D.Please obey the regulation and policy in your country and area during installation. 3. Package Consistent Thank you for choosing our product.
4, Samara System Installation 4.1 Preparation for setup Before installation, be sure to prepare the followings: TV/PC monitor {Not laptop or all In one computer), with 10800 or higher resolution. HDMI or VGA cables for connection to the TV/PC monitor. Router (WAN) and Internet Service {for remote viewing) If the system you purchase has no hard drive per-installed, you will need a hard drive If you want to record videos.
4.2.1 How to format the hard drive and check its information? Generally the hard drive will be automatically formatted. From the home screen of your monitor, right click the mouse, navigate to Main Menu » Advanced > HDD nfo. if the status shows abnormal or error, please select the hard disk and click © Format Storage” > click “OK” . From this screen you can also select the hard disk and click “Recover” to try to repair it. 4.8 System connection Camera Schematic 1.
System Connection Connect NVR and cameras with corresponding power adapters. NOTICE, HVE Power Adapter: 12V/ 24 Camera Power Adapter: 12V/ 1A Connect provided mouse to NVR box. Attach provided antennas to cameras. (Note, if antenna has already been screwed into the camera, please DO NOT unscrew it. Otherwise camera will be broken. Systems have two different antennas. One can be removed and the other cannot be, which is all-in-one.
5. Password 5.1 Password Management After system powered up, it will show Startup Wizard. Click "Next" to continue, Click “Cancel” to go to SYSTEM LOGIN. The default username is admin. Click *0iC, then follow the Instructions on screen to set password. Note, the password should be no less than 8 digits, in the form of number and letter.
5.2 Password Modification Right click the mouse on the home screen and navigate to Main Menu » System = Account >» Modify Pwd = enter old password » set new one and repeat to confirm = click "OK". Ab Account page, you can also set an unlock pattern to login. Click "Set Pattern” = long press the left button of the mouse to draw pattern.
Password Reset Click “Forgot password” »answer two questions selected efflorescence "OK" »set a new stewardship-0K. if you forget the answers to the questions, please click “Forget Answer?” at Safety question page. Then follow the tips fo enter the verification code to reset password, 6. Network Connection For remote viewing on phone or laptop, please connect the system to your router with an Ethernet cable provided. Check Network Status: Right click the mouse navigate to Net Detect.
If test failed, please troubleshoot below. A. Check if the network cable connected well, B. At "Net Detect” page, click “Network” to check if “CPD Enable” has been ticked. C. Check other reasons through the diagnosis result. 7. Video Recording MOTE: A, Recording and playback requires a hard drive installed and shipped with the system or installed in the NVR by the user. B. Make sure the status of the hard disk is Normal. A newly installed Hard Drive needs to be formatted before recording.
Step: Select the channel you wish to schedule. MOTE: You do not have to repeat this process for each channel if you select "all" to set all the channels consistently. Step: Select recording type: Regular and Detect. NOTE: regular refers to perform common recording during the set time period. Detect means the NVR will record all the motions once motion triggered during the set time period. steps: The period can be set to an individual day of the week [7 days available from Monday to Sunday}.
7.3 Manual Recording in Main Menus Record Selectness Manual. It records 24 hours per day. Other options are ineffective. 4 Record Undershorts menu) right click the mouse on the home screen and got “Record Mode” | 1t is used to simply set the recording mode of each channel, but the specific parameters need to be set in the Main Menu. 8. video Playback 8.
« Some commonly used buttons: ICON Function ICON Function playhouse | G0 Stop Full Screen ie Slow Playback 0] Reverse Fast i Fast Playback * The following contents introduce 3 modes. 8.2 Common Flay Back A. when at "Play Mode” , select the channels then the date and a period you wish to “Start Playback” . Mote: Button “Start Playback” |, as shown below. B. Then you'll see colorful timeline show up at bottom of your screen, recorded video will start to playback.
8.3 Synge Playback Refer to the steps of part 8.2 about Common Play Back. The playback control buttons are effective for all channels at ane time, For example, it supports to fast playback all videos at the same time. &.4 Face Search Retrieve the image captured when the face retrieval alarm is generated {only one similar image will be retained when multiple similar images are captured in a certain period of time}. A, When at Play Modes Click "Face Search” .
B.After clicked “OK, many fragments containing different or identical faces will be displayed. Click on the images select the video to playback. 8. Video Backup right click the mouse from home screen, navigate to Main Misstatements Backup=Plug in your USB disk and click the detected USB disk and click ‘Backup's Select the type, channel and time and click ‘add s Tick the recorded file you want to back up and select the backup formats click ‘start’ Note: ANVIL only supports FAT format U disk. 8.
gala Right click the mouse »navigate got “Main menu” > “Alarm”. The alarm part includes three pairs: Intelligent Alert, Abnormality, Traditional alarm. 10.1 Intelligent Alert Intelligent alert will be triggered by motion detection, human detection and face detection. The alarm is enabled by default. Human Detection and Face Detection are effective. you want to set "Human Detect” only, please unchecked “Face Detection” .
Record: Tick “Record” if motion record needed. Malleable Reported: If this option is checked and the alarm push on the phone app is enabled, the alarm message will be received by phone app. Sensitivity: Set sensitivity depending on your installation environment Rule: the function to set the area of detecting motion Click “Set” right beside “Rule” , this screen will pop up. Show Traces: when the system detects human, there will be a moving frame showing on the live view.
region: For default setting, the whole area with color has been selected for motion detection. Left click the mouse to cancel or select the area you want to set. Right click the mouse to return to the previous page. Click “Set” right beside “Advanced”. This interface below will be displayed.
Period: within the set time range, the device will trigger the motion detection alarm, as shown in the figure below, It can be set according to the week, or can be set uniformly, with four time periods set every day. Select the check box before setting the time period, and the set time will be valid. Click "0K" to save settings. MD Interval: Within the set interval, if multiple motion have been detected, alarm will be triggered sequentially.
10.3 Traditional Alarm Video Blind and video Loss are effective, Video Blind: The video image transmitted by the front-end camera to the recorder is affected by the outside world, and when the light intensity reaches the set sensitivity parameter, the video occlusion alarm is triggered; Video Loss: When the video recorder cannot obtain the video signal transmitted by the front-end camera, the video loss alarm Is activated. malleable Hottie A. Make sure your network is online.
To receive notifications, you need a Email account { Such as, Hot mall, Gall, Yahoo) Complete the fields on the screen as follows {take hot mail account as an example): Tick “Enable” SMUT Sever: Afterlives Port: 587 Encryption: TLS User Name: Your email address Password: Email login password Sender: Your email address Receiver: Your email address NOTE, you can use the same email address as stated above. Then click "Mail Testing” until the Test success message appears on the screen.
12. How to get beater signal 12.1 Antenna Adjustment A. The antennas of NVR and IPC should be placed in a high and open place, and not close to walls, metal, glass and other obstacles, which will affect the signal's divergence. B. The IPC antenna should be placed in parallel with the NVR antenna as much as possible, as shown in the figure below. Flt sis 12.
A. Auto Repeat: This mode can support at most 2 levels of repeater chain like In this repeater chain, PCT connects the NVR directly and the [PC2 connects the IPC. In this mode, the camera receiving a weak signal will automatically connect to another camera with better reception Mk B. Open Repeat: This mode can support 3 and more levels of repeater chain. iris not recommended to turn on this mode because it will cause excessive load on the WiFi module during transmission.
A. Go to the App store/ Google Play on your Smartphone and download app called "Meyer Pro” B. After app opened, please click “Register” to create an account and password and be sure to remember your account login info. (Pic#2) C. Clickthe "I" button and then click “NV. (Pic#384} D. Scan the QR code on the NVR system by your Smartphone. {Pic#s) The code can be found by right clicking the mouse from home screen af NVR system, navigate to Main Meritoriousness.
13.1 How to playback on your Smartphone A. Goth “Replay” after open the app on your Smartphone, Mote, it only supports to replay one channel at a time. 8. Choose the date you want to replay. (Pics) Mote, click “Multiple” 1o fast forward if needed Siam —— Pinch Pics 13.2 How to setup APP Alarm A, Refer to the part 10.1 Intelligent Alert to make sure alert has been enabled. B. Go to Main Menu on your NVR mysteriousness-Net services Double left click on “Mobile reported” | tick “Enable” and then click "OK". C.
14. Viewing on BPC by VMS software please contact seller for PC client software. Contact Information is on page#1. Install VMS software on your PC. The default user name and password are “admin” . Then click "SIGNING After signed in, please click “Device Manager” to add the device. There are 3 ways to add device. A. Add device automatically Click "1PV4 Search” to search for devices » select the device you want to access with VMS » click “Add” to add the device. See screenshot below. B.
After all information entered, please click "OK" » got “Home” =click “Live view” > double click the device name under the device list > double click each channel and the images will show up. C. Add device by Cloud ID Gow “Home” »click "Device Manager” »click “Manual Add”. Refer to the steps of section above about “Add device by IP” in addition to the following Information.
15, Other Functions Color Setting and PTZ Control are not available currently, Please leave them default settings 16. Frequently Asked Questions 16.1 What Is the working temperature of Security Cameras? From -50 degrees Fahrenheit to +122 degrees Fahrenheit. 16.2 How to adjust the Date and Time? First way: Navigate to Main Menus Date Time, please select correct Date & Time and Time Formatted.
A, wireless Matching Code Mote, camera needs to be within 307 from the NVR when tirelessly matching code. Right click the mouse from home screen, navigate to “Wireless” » Code for wireless » Power or reconnect the camera, following the prompt to Walt around 3 minutes = click “Exit” when the process is completed. 8. wired Matching Code Connect the camera to the NVR with network cable, and wait around 3 minutes until the image appears, then disconnect the network cable.
if yes, the camera and the power supply are working. Please refer tithe part 16.4 “How to match the new camera to the NVR” to regain the image. if no IR-CUT light on, please test with another good power adapter. in this case, please contact after-sales service (page#! J. 16.8 How to restore the unit? Right click the mouse from home screen, navigate to Main Advancements Restores Select A-OK. After settings restored, the cameras will show up automatically.
Steps: If Ste pd does not work or you do not have another monitor, please contact our tech support via email or phone call {page#1 ). we will send you software to search NVR IP and modify the resolution on your computer. 16.
After-sales Contact Information USA TOLL-FREE: (858) 710-5666 (Available after 5:00 PM at Pacific Time) CANADA TOLL-FREE: (888) after 5:00 PM at Pacific Time) E-MAIL: SMONET@MMLLIOLCOM SKYPE 1D: safeskysales003 WE CHAT: B997520270 < 30