AHD Digital Video Recorder System User Manual 2CH/4CH/ 6CH/ 8CH AHD DVR KITS USA Toll Free: (866) 866-1658(Available after 5:30 PM at Pacific Time) CANADA Toll Free: (888) 988-7118(Available after 5:30 PM at Pacific Time) Email: smonet@mmllxx.
Catalogue 01.Statement 02 02.Safety cautions 02 03.Open-package inspection 03 04.Before installation 04 05.Interface Instructions & installations 05 06.Log in 07 07.Add New User and change password 07 08.Record Video 08 09.Playback Video 10 10.Backup Data 10 11.Remote View on your Phone 11 12.Motion Detect 15 13.Email Settings 17 14.Remote View on your Computer or Laptop by CMS Software 20 15.
1 Statement Thank you for purchasing the SMONET AHD Security Camera System! This user manual is designed to be a reference tool for the installation and operation of your system. Here you can find information about the system's features and functions, as well as information to aid in troubleshooting. Please feel free to contact us if you need any assistance. Warm Notice,ensure to get the professional after service,please contact our service directly instead of the agent.
3 Open-package inspection We do everything we can to ensure that your order arrives at you in a complete and undamaged condition. Please check the products immediately upon their arrival. If the products arrive damaged or incomplete, please contact us at once. Here is the list for product and relevant accessories.
4 Before Installation Before connecting your system to test, please be sure to have items : PC or TV monitor, VGA or HDMI cable Network Cable & Router(WAN) Hard Drive (if system without HDD),Please purchase HDD(SATA 3.5”) regularly to ensure the quality.
5 Interface Instructions & installations Interface definition specifications DC 12V DC12V power input interface RS485 PTZ control signal interface RJ45 Ethernet port USB interface AUDIO IN VGA Audio input interface(The system doesn’t support Audio) VGA interface for connecting a VGA monitor HD-OUT HDMI interface for connecting a HD monitor A-OUT Audio output interface VIDEO IN Camera signal input interface After connecting the system,If you have issues as below, please reference our solutions.
1 No images display on your monitor after connecting Step 1: Please confirm DVR has connected with power supply. Step 2: Please make sure that the input is set to VGA if you connect DVR to monitor with VGA cable; make sure that the input is set to HDMI if you connect DVR to monitor with HDMI cable. Step 3:Try a new monitor because your monitor may not be compatible with our system resolution.
6 Log in After you finish the complete system, right click,navigate to Main Menu,you will see the window below on your monitor screen. Default user name: admin, no password. Click ok to continue.
Please Note, the user name of system is admin. Please change the default password to ensure your system safety. Please Click Modify Pwd at bottom>Old password is blank, no old password> input new password(Request to 8 numbers)>repeat new password>click ok 8 Record Video If your system is without hard drive or install hard drive unsuccessfully, it can not be able to record and playback video.The equipment supports 500GB to 6TB hard drive; Size requirements are presented as follows: SATA, 3.
Note: The system default is to record 24 hours a day. If Motion Detect is required to set, you shall select Detect in the Schedule and open recording function of a corresponding channel in the setting of Motion Detect, as shown below: Right Click,navigate to Main Menu>Record You can set the cloud channel and record time here.After setting,please click Application to save,then click Ok.
9 Playback Video To playback, firstly you have to set up the recording function as described in the section above, and already have record files.Please navigate to Playback,select the recording time that you need playback.Please note when the hard drive is full,the new recording will automatically overwrite the prior recording. Step 1 SeIect date Step 2 Select Channnel Step 3 Select Recording Type Step 4 Search for Recording 10 Backup Data 1.
11 Remote View on your Phone The equipment supports P2P phone remote monitoring. You can view and play back the recordings via your phone whenever and wherever you want after the equipment is connected to the Internet. Steps for setting are presented as follows: 1.Connect the equipment to a router that is connected to the Internet through the Ethernet Cable; 2.
then in the same screen, click Phone App>Cloud 1>Enable>Register,Click OK,the device will restart. P.S.: If It doesn’t Restart, please Restart System Manually. Navigate to Menu>Click Logout at the bottom>Select Reboot After restart,please enter this page again,Main Menu>Network>Phone App,you will see the Nat status is connected.
When Nat status is displayed Connected, you can search and install Danale app in the Google Play or APP Store on your phone(Pic 1). And then, you can use the email or phone number for registration and login(Pic 2), as shown below: Click in the central to add device(Pic 3); Pic 1 Pic 2 Click QR code to add in the bottom of the interface(Pic 4). Entering a QR code scanning interface(Pic 5). Please find Pic 4/5 at next Page for your reference.
Pic 4 Pic 5 And then, scan the SN QR code on the DVR in Cloud1(Navigate to Network settings>Phone App>Cloud1); It will be automatically redirected to the interface of setting the equipment name(Pic 6); Press OK after entering the equipment name; The equipment added will be automatically displayed on the main menus of the APP(Pic 7). You can click it for previewing. Please find Pic 6/7 at next Page for your reference.
Pic 6 12 Pic 7 Motion Detect Steps for setting are presented as follows: 1.
2.Click Motion Detect,select a channel and enable it, then click Advanced 3.Select corresponding setting options as required.
Described definitions of each option are presented as follows: Sensitivity The higher the sensitivity of the motion detect is, the easier the motion detect alarm will be triggered. Region You can deploy the motion detect region here. Default motion detect region is the whole area (Red means deployed) Period set the time period for opening motion detect; Interval/Sec. Motion detect trigger interval is to set the interval of next trigger of motion detect after the trigger of this time (1S default).
2)Enable it to set corresponding parameters. Described definitions of each option are presented as follows: SMTP Server Port SMTP server: Click ▼ to select the corresponding SMTP server according to the mailbox type; Mailbox access port is 465 default when opening the SSL mode; Need SSL Whether it's necessary to select SSL encryption; It's checked default.
After setting, you can click Mail Testing to check whether set successfully.
14 Remote View on Computer or Laptop by CMS Software Please add the equipment in the phone APP before the use of computer client software. Steps for operating the computer client remote monitoring software are presented as follows: 1.Please send an e-mail to SMONET@mmllxx.com to get new software. E-mail subject: Amazon order number+Request CMS software. You can select a corresponding CMS software for installing according to your PC system. 2.
15 Frequently Asked Questions Question 1: If the DVR cannot be started after booting, what shall I do? Answer: Possible reasons: 1. Incorrect input power adaptor; 2. It fails to be energized normally; 3. The power adapter is damaged; 4. Damaged hard disk or damaged hard disk line.
Question 6: What shall I do if the network remote access is unstable? Answer: Possible reasons: A. Unstable network; B. Conflicting IP address of the DVR. Question 7: What shall I do if Device ID not exist is prompted when the phone APP is adopted to scan QR code for adding? Answer: Possible reasons: A. Use a wrong APP, please download Danale; B. Scan a wrong QR code, please scan SN QR code in Cloud1(Navigate to Network settings>Phone App>Cloud1).
V.
