VP4750 User’s Guide Bluetooth Touchpad Remote for presentations and desktop control VP4750 Manual.
Table of Contents Getting Started .......................................................................2 Buttons and Controls ..............................................................3 Windows Pairing for Windows ................................................5 Using the remote in Windows .................................8 Mac Pairing on the Mac ..................................................9 Using the remote in OS X .....................................11 Advanced Topics .......................
Getting Started Thank you for purchasing the VP4750 Bluetooth Touchpad remote by SMK-Link. It’s the perfect tool for giving better presentations or controlling your computer from across the room. The VP4750 uses Bluetooth to provide up to 33 feet of range and a touchpad for the most accurate mouse pointing. Before you begin, your computer should already have Bluetooth installed (either internally as on a Mac or high-end laptop or externally with a Bluetooth dongle).
Buttons and controls Bluetooth LED Activity LED Prev Slide / Left Arrow Next Slide / Right Arrow Connect Button Touchpad Power Switch Scroll Strip Right Mouse Button Blank Screen (Presentation) Left Mouse Button Page 3 VP4750 Manual.
Bluetooth LED: Shows the status of the Bluetooth connection. Fast Blinking: In Connect Mode. Off: Not connected Slow Blinking: Connected. Activity LED: As you press controls this LED should blink. Next Slide / Right Arrow: Pressing this button is the same as pressing the right arrow key on your keyboard. In presentation software it advances to the next slide. Prev Slide / Left Arrow: Pressing this button is the same as pressing the left arrow key on your keyboard.
PC Pairing for Windows The first time you use any Bluetooth device, you must pair it with your computer. Depending on the drivers and version of Windows you have, your screens may appear slightly different but the steps are generally the same. Should you have problems pairing, please contact Customer Support for assistance.
PC or Step 3: Put VP4750 in to Connect Mode Turn the remote On by sliding the power switch on the right side of the remote. Put the remote into connect mode by pressing the Connect button on the left side of the remote. The blue LED should immediately begin blinking rapidly. Step 4: Follow Add New Device Dialog Boxes Your driver may have a checkbox for “My device is set up and ready to be found”. If so, check that box and click next.
PC Step 5: Final Details Select the VP4750 from the list of recognized items and click next. For drivers which need a device type, select Mouse. If asked for a passkey, select “Do not use passkey” or “Empty passkey.” Follow the dialog boxes until done. You should now be able to move the cursor by sliding your thumb over the touchpad. Page 7 VP4750 Manual.
Using the remote in Windows Presentation Software PC Give professional presentations with PowerPoint and the VP4750. Control your slideshows from up to 33 feet away. Use the touchpad as a mouse to load and start your presentations. The Next Slide (>), Previous Slide (<) and Blank buttons will help your presentations look more professional. Hint: Use the cursor as a virtual laser pointer. A laser pointer doesn’t show up on a web conference and is hard to see on plasma displays.
Pairing on the Mac The first time you use any Bluetooth device, you must pair it with your computer. Pairing is very simple on the Mac, however, should you have problems, please contact customer support for assistance. Mac Step 1: Bring up System Preferences Bring up System preference either by clicking on it in the dock or by finding the icon in the applications folder.
Step 4: Set Up New Device Click the “Set Up New Device” button then click continue. When asked for the new device type, select “Mouse” from the list of choices and click continue. Mac Your Mac should then find the VP4750. If it doesn’t, please go back to step 3 and make sure you are in connect mode. Once found, click continue to finish pairing your VP4750. Then click quit when done. You should now be able to move your cursor by sliding your thumb over the touchpad. VP4750 Manual.
Using the remote in OS X Presentation Software Mac The VP4750 works with both Apple Keynote and Microsoft PowerPoint. Control your slideshows from up to 33 feet away. Use the touchpad as a mouse to load and start your presentations. The Next Slide (>), Previous Slide (<) and Blank buttons will help your presentations look more professional. Hint: Use the cursor as a virtual laser pointer. A laser pointer doesn’t show up on a web conference and is hard to see on plasma displays.
Advanced Topics Mouse Speed The speed of the mouse can be set in your Windows control panel or the Mouse preference pane of System Preferences. Sleep Mode Because Bluetooth is continually transmitting and receiving, it goes to sleep after 20 minutes of inactivity. When it goes to sleep it disconnects from your computer and turns itself off. To wake it up, just press the power button and wait a few seconds for Bluetooth to reconnect.
Agency Certifications USA - FCC CFR 47 Part 15, Subpart B and C This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules.
made to the equipment without the approval of manufacturer could void the user’s authority to operate this equipment. Canada - IC RSS-210, ICES-003 This Class B digital apparatus complies with Canadian ICES-003. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Specifications Communication Method Bluetooth Standard V2.0 +EDR Frequency Band RF 2.4 GHz (Bluetooth) Transmission Distance Up to 33 feet Power Requirement 3V DC (two AAA sized batteries) Battery Usage Up to 14 hours (continuous usage) Touchpad Capacitive Touchpad with Scroll Strip System Requirements Operating System Windows XP or Vista Mac OS X 10.4 or higher Hardware Built-in or add-on Bluetooth Dongle (Version 2.0 or higher) Page 15 VP4750 Manual.
Troubleshooting The controller doesn’t work when I turn the power on. • If it’s never worked, you may need to insert batteries (p. 2) or pair the remote with your computer (PC p. 5, Mac p. 9). • If it worked 20 minutes ago, it may have gone into Sleep Mode to save power. To check, press the touchpad. If the green Activity LED does not turn on, slide the power switch to wake the unit back up. Movement of the cursor is jerky. • You may be too far away from the computer.
When the computer goes into sleep mode, the remote does not operate or operates erratically. • Deactive the Bluetooth connection, wait a few seconds and then re-establish the connection. The mouse moves too fast / too slow. • The speed of the mouse can be set in your Windows control panel or the Mouse preference pane of System Preferences. The Scroll Strip does not work. • Not all programs support scrolling. Try scrolling on a wired mouse.
Thank You Thank you for purchasing a VP4750 Bluetooth® Touchpad Remote. We know you had other choices and we appreciate that you chose SMK-Link for your wireless needs. So that we may better serve you in the future, please register online at “www.smklink.com/register”. Warranty 30-Day Money Back Guarantee One Year, Limited Warranty Contacting Customer Support SMK-Link Electronics, Inc. 3601-B Calle Tecate Camarillo, CA 93012 USA Telephone 888 696 3500 Fax 805 987 6665 www.smklink.com VP4750 Manual.
