Bluetooth® Presentation Controller VGP-BRMP10 取扱説明書 / Operating Instructions / Mode d'emploi Bedienungsanleitung Printed on 70% or more recycled paper using VOC (Volatile Organic Compound)free vegetable oil based ink. http://www.sony.
WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. Owner’s Record The model number and the serial number are located inside the battery compartment of the mouse. Record the serial number in the space provided below. Refer to this number whenever you call your Sony dealer regarding this product. Model No. VGP-BRMP10 Serial No. ____________________ For customers in the U.S.A.
If you are uncertain of the policy that applies to the use in a specific organisation or environment, you are encouraged to ask for authorization to use Bluetooth® wireless technology prior to switching it on. Consult your physician or the manufacturer of personal medical devices (pacemakers, hearing aids, etc.) regarding any restrictions on the use of Bluetooth® wireless technology. Disposal of AAA batteries • This wireless device is powered by AAA batteries.
Before Use Features This controller is a Bluetooth Presentation Controller that uses Bluetooth technology. • Remotely start a slideshow, and move slides forward or backward. • Use the touchpad as a pointer during your presentation. • During your presentation, use the pointer option (page 00) to write on the screen, or use hyperlinking. Make your presentation more appealing with full control over video, Websites, and other content.
Compatible personal computers The Bluetooth® Presentation Controller can be used with the following personal computers (as of May 2007): • Sony VAIO personal computers equipped with Bluetooth technology and pre-installed with Microsoft Windows XP Professional, Microsoft Windows XP Home Edition, or Microsoft Windows Vista. (SP2 must be installed on your personal computer if it is pre-installed with Windows XP.) See the website referred to in “Getting Help” (page 00) regarding specific models.
Location and Function of Controls Front View 1 Previous Slide button Displays the previous slide during a slideshow. Has the same effect as pressing the PgUp (page up) key on the keyboard. Note z Hint It may be difficult to control the pointer with the pad of your finger on the touchpad. We recommend lightly sliding the tip of your finger on the touchpad. Operation may be adversely affected if your fingertip is wet or sweaty.
Back View 3 Left button Works the same as the left button of a personal computer’s touchpad or mouse. Press this button to open document or image files, or select software to run. 4 SLIDE SHOW button Starts or ends a slideshow. 7 POWER lamp Displays the battery status. Status Lamp Battery fully charged Solid green Battery charge low Flashing yellow Power off Off Has the same effect as pressing the F5 and Esc keys on the keyboard.
Setting up Inserting batteries 1 Set the power switch to OFF. 2 Open the battery compartment cover. 3 Insert the two IEC R03 (size AAA) batteries* with the correct + – orientation. * The supplied manganese batteries are for testing purposes. We recommend using commercially available alkaline batteries.
Note To prevent battery fluid leaks and damage, observe the following precautions. • Insert the batteries with the correct + - orientation. • Do not charge dry cell batteries. • Do not use old and new batteries together. (Doing so may cause the battery fluid to leak. It can also prevent the controller from operating.) • Do not use different types of batteries together. • If the controller will not be used for a long time, remove the batteries.
Using the Bluetooth Utility software to enable communication Use the Bluetooth Utility software installed on your personal computer to enable communication between the controller and your personal computer. z Hint Operation of the Bluetooth Utility software may vary depending on your personal computer. For details on how to use the software, refer to the manuals provided with your personal computer. 1 Turn your personal computer on. 2 Set the power switch to ON.
Bluetooth status lamp CONNECT button 7 Select “Express Mode”, and click “Next”. Search for Bluetooth devices begins. 8 In the device list, select “VGP-BRMP10”, and click “Next”. If your personal computer is pre-installed with Windows Vista: The “Add New Connection Wizard” screen disappears. Try moving the controller. If the pointer displayed on your screen moves in the same direction, the connection is complete.
Disconnecting Turn off the power switch of the controller. Reconnecting Turn on the power of the controller. After the Bluetooth status lamp turns blue and begins flashing, the flashing will slow, and the connection will be resumed. Operating distance of the controller The controller can normally be operated within about a 32 ft. (10 m) radius around the personal computer. Depending on the usage environment, sometimes the usable distance may be notably shorter, preventing normal operation.
Using the Controller Giving a presentation This section describes the steps for giving a presentation using PowerPoint software. See “Location and Function of Controls” (page XX) for instructions on using the buttons and touchpad. Also see “Tips for giving a smooth presentation” (page XX). 1 Open the file for your presentation in PowerPoint software. 2 Start a slideshow. Press the SLIDE SHOW button. SLIDE SHOW button z Hint • If nothing happens, try pressing the button again.
Enable or disable scrolling and tapping You can enable or disable the touchpad’s scrolling and tapping features (page 00). The scrolling and tapping features are enabled at the factory. 1 Turn on the power switch (shown in rectangle) while simultaneously pressing and holding the SLIDE SHOW button, Left button, and Next Slide button (shown in circle). 2 The POWER lamp flashes green and yellow. Perform the following operation while it is flashing.
Adjusting the pointer speed If the pointer does not move smoothly when you slide your finger on the touch panel, use the steps below to set the pointer to a speed that is easier to use. (The instructions below are only an example. The actual procedure may differ depending on your personal computer. For details, refer to the manuals provided with your personal computer.) 1 Click “Start”, then “Control Panel”. The Control Panel window appears.
Selecting the tapping and scrolling settings The touchpad’s tapping*1 and scrolling*2 features are enabled at the factory. Enable or disable these features according to preference. See page XX for details on how to enable or disable these features. *1 The tapping feature Tapping lightly once on the touchpad is equivalent to performing a left click. This is handy for things like navigating hyperlinks or playing video files during a presentation.
Specifications Communication method Accessories Bluetooth Standard Ver. 2.0+EDR Manganese IEC R03 (size AAA) batteries*2 (2) Operating Instructions (this document) (1) Warranty Card (1) Frequency band RF 2.4 GHz (Bluetooth) Power requirements 3 V DC (two manganese IEC R03 [size AAA] batteries) Transmission distance 32 ft. (10 m) max. line of sight*1 Dimensions Approx. 1.6 × 0.4 (0.8 max) × 4 in. (40 × 10.9 (20.2 max) × 104 mm) (w × h × d) Mass Approx. 2.0 oz.
PrecautionsはIRX-9247から流用しています。 Precautions Safety If any solid object or liquid falls onto the controller, disconnect it and have it checked by qualified personnel before continuing its use.
Maintenance Wipe the outside of the controller with a soft, dry cloth. Cleaning the cabinet • Turn off the power and remove the batteries before cleaning the controller. • Do not use an excessively wet cloth to clean the controller. • Do not use solvents, cleaning alcohol, benzene, or other substances that may damage the finish.
Troubleshooting If you experience any of the following difficulties while using the controller, use this troubleshooting guide to solve the problem. If a problem persists, consult your nearest Sony dealer. Symptom Cause/Remedy The controller does not turn on when I set the power switch to ON. ❒ Your personal computer is in power-saving mode or is not turned on.
Symptom The pointer does not move when I slide my finger over the controller’s touchpad. Cause/Remedy c In some operating environments, the usable distance may be noticeably shorter, preventing normal operation. In such cases, use the controller farther away from any other devices that may be interfering with operation. c If the controller is too far from your personal computer, communication is not possible. Bring the controller and your personal computer closer together.
Symptom Cause/Remedy Pressing the CONNECT button does not establish a connection. c Communication between the controller and your personal computer may not have been properly established. If the CONNECT button on the controller is not pressed within 30 seconds after the Bluetooth device search begins, or if the operation does not complete within one minute of pressing the CONNECT button, controller communication is cancelled. In such a case, perform the procedure again to enable communication.
Symptom Cause/Remedy Recovering from power-saving mode with the controller takes a long time or is not possible. c Press any key or the power button on the keyboard of the personal computer . The controller does not move smoothly after recovering from the power-saving mode. c Deactivate the Bluetooth connection, wait a few seconds, and then reestablish connection. The controller does not connect when I turn it off and back on. ❒ The security level of the Bluetooth Utility software is set to High.
