Jvc mn AUDIO/VIDEO CONTROL RECEIVER RX-DP10VBK & rm-SRXDP104 ry N CONVERTER AY COMP LINK COMP LINK DIGITAL SURROUND Devotee] PIGTAIL EAT] CTT EL THX SURROUND G50 For Customer Usa: Enter below the Model No. and Serial No. which are located either on the rear, . bottom or side of the cabinet. Retain this information for future reference.
Warnings, Cautions and Others/ Moses en grade, precautions et indications diverse TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OF BACK) NO USER SERVICEABLE PARTS INSIDE.
Ra mote Control == (iki oc OFFER Caw ETE [12h MAIN ROOM/SUB ROOM {LEARN/TRANSMIT) selector {Z} MAIN ROOM ON/OFF button (21) SUB ROOM ON/OFF button (28) {3} Display window A Source selecting buttons (18, 19,21, 29) + DVD, DVD MULTI, PHONON, CP, VCR 1, VCR 2, ‘TAPE/MD, CDR.
| Setting Up the RF Rod Antenna The remote control supplied for this receiver can transmit both RF (Radio Frequency) sign: well as IR (infrared) signal, The RF rod antenna can receive the RE signals emitted from the remote control. So. with the RF rod anterior connected, you can operate the receiver at a distance feet) using RF signals sent from this receiver (more than twice as far as when using IR signals).
3. Connect the plug of the transmitter to the IR OUT jack of the receiver and attach the transmitter. Tan angle af approx, 80° Multilingualism angle of the transmitter Horizontally: 66 Vertically: 60° Connecting the Power Cord Before plugging the receiver fio an AC outlet. make sure that ait connections ave been made. Plug the power cord into an AC outlet, Keep the power cord away from the connecting cables and the antenna. The power cord may cause noise or screen interference.