Rechargeable Wireless Long Range Laser Mouse
This Class B digital apparatus complies with Canadian ICES-003 specification. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
System Requirements Hardware: 2 available USB ports: 1 for receiver dongle, 1 for charging Operating System: Windows 2000, XP, Vista, Windows 7, or Mac OS X Package Contents • If the mouse is purchased as part of the keyboard/mouse combo set: o o o o o o o • Rechargeable wireless laser mouse 2 x AAA rechargeable Ni-MH batteries Carrying pouch Shared USB dongle receiver (in the keyboard box) Shared USB charging cable (in the keyboard box) Shared USB adapter for RF pairing (in the keyboard box) User’s man
Resolution Switch/ Indicator LED (Red & Green) Battery Cover Eject Button Left Mouse Button Battery Cover Middle Mouse Button/ Scroll Wheel Power Switch & LED (Located on Bottom) • Right Mouse Button Mini USB Charge/ Pairing Port LED status indicator lights: o This mouse is designed with two status indicator LED lights located at the bottom of the mouse and on the top of the mouse, beneath the resolution switch.
Charging battery Battery fully charged switch button Underneath the resolution switch button Underneath the resolution switch button During charging When battery is fully charged completely drained Red LED flashes slowly until it’s fully charged Red LED lights up and stays on until charging cable is removed Installing Batteries Battery Cover Eject Button AAA Rechargeable Ni-MH Batteries (2) • • • Remove the battery cover by pressing the eject button.
Charging the Batteries Power On LED Indicator On/Off Switch USB Cable, Mini B to A Charging/Pairing Port USB Mini B • • • • • • It’s recommended that you fully charge the batteries before initial use; nevertheless it’s ready for set up (see next step) anytime during charging. Connect the mini USB connector of the charging cable (included in the box) to the mouse’s mini USB port. Use only the supplied charging cable to charge the batteries.
Pairing the Mouse to the Receiver Dongle • • • Your mouse is pre-paired with the receiver dongle at our factory for your convenience, and it’s now ready to work. First, turn on the mouse power by moving the power switch located at the bottom of the mouse to “on” position. When the power is switched on, the green LED lights up for about 2 seconds to indicate the mouse is powered on. Plug the USB receiver dongle to the computer’s USB port if it’s not already plugged in.
Pairing Indicator LED USB Adapter USB Receiver Dongle o Remove the adapter and the receiver from the mouse, plug the receiver to your PC’s USB port. You are ready to use the mouse.
• • • • • • • Turn the power switch to “on” position before plugging in the receiver dongle to perform pairing. When traveling with the mouse, remember to turn off the power to preserve battery life. This mouse comes with a resolution switch button for productivity enhancement. Press the button to toggle between the 3 different resolutions: o 800-cpi: the default resolution o 1200-cpi o 2100-cpi To preserve power this mouse is designed with a sleep mode. After 2 hours of inactivity it goes to sleep.