iCalc RemotePoint Sapphire Presenter ™ VP4585 Bluetooth Calculator Keypad K ® VP6274
System Requirements Hardware: Package Contents: • Bluetooth-enabled computer (with either built-in Bluetooth wireless capability or external Bluetooth dongle) • iCalc™ Bluetooth Calculator Keypad • Optional for the iCalc attachment: Apple® Wireless Keyboard, the Bluetooth model • 2 x AAA Batteries Operating System: • Magnetic Alignment Wedge • Quick Reference Guide ©2013 SMK-Link Electronics Inc. SMK-Link, the SMK-Link logo, and iCalc are trademarks of SMK-Link Electronics, Inc.
Thank You Congratulations on your purchase of the iCalc Bluetooth Calculator Keypad. We thank you for choosing SMK-Link Electronics to meet your wireless needs and look forward to serving you in the future. To learn about new SMK-Link products as they become available, and to ensure the best possible customer support, please register your product online at www.smklink.com/register.
Step 1 Install Batteries (Supplied) • Remove the battery cover from the bottom of the iCalc. • Insert the 2 AAA batteries (supplied) into the battery slots. Make sure the positive (+) and negative (-) ends of the batteries match the polarity markings inside the battery compartment. • Snap the battery cover back into position. • Turn on the power by sliding the ON/OFF switch located at the bottom of the iCalc to the ON position.
harmful interference to radio communications. However, there is no guarantee that this radio interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment on and off, the user is encouraged to try to correct the interference by one or more of the following measures: Battery Door • Re-orient or relocate the receiving antenna.
Step 2 (Optional - For Magnetically Aligning the iCalc to the Apple Wireless Keyboard) Attach the Bridge This step is optional if you are using the Apple Wireless Keyboard and wish to magnetically align the iCalc to the keyboard. The iCalc Bluetooth Calculator Keypad works with, or without, the Apple Wireless Keyboard. • Turn the Apple Wireless Keyboard upside down. • Remove the sticker from the back of the wedge.
Warranty SMK-Link Electronics Corporation (SMK-Link) warrants to the original enduser purchaser of the Product (“you”) that the Product, excluding batteries, will be free from defects in materials and workmanship under normal use and service for one-year from date of purchase. If the Product becomes defective in materials or workmanship during the warranty period, SMK-Link will, at its option, either repair or replace it.
Step 3 Connect the iCalc to Your Bluetooth Computer • Make sure the power is on and the OS Selector at the bottom of the keypad is switched to the correct OS. The LCD display should say “On Keypad” and a “0” is displayed. • Before you can use Bluetooth devices for the first time, you must connect your devices through a standard discovery and pairing process. • The iCalc Bluetooth Calculator Keypad is designed to work with Bluetooth-enabled systems.
Step 4 Using the iCalc Bluetooth Calculator Keypad Function Keys MODE Switch between Keypad (communicating with your computer) and Calculator (offline) modes. SEND Send the calculation result displayed on the keypad LCD to the computer when the device is in Calculator Mode. WAKE Press once to wake the keypad from sleep mode. Operation Status KEYPAD Allows for Bluetooth pairing and key entry on your computer files.
• On your iCalc Bluetooth Calculator Keypad, type the passkey (numbers) provided on your computer screen, followed by “enter” key on the keypad. Please note that the numbers will not be displayed on the keypad’s LCD screen as you type them in. At this point, the pairing process is complete. Click on “Continue.” • On the conclusion screen, click on “Quit.” The keypad is ready to use. Device Pairing on Windows • Make sure the power is on and the OS Selector at the bottom of the keypad is switched to PC.
