How-To Guide

ManualsBrandsSMITH & NOBLE HOME ManualsElectronicsSmart Hub

SMART HUB

Doc. version – V.01

www.smithandnoble.com

Smith + Noble Home, Inc.

ENGLISH

To ensure safety, please read this manual carefully

before installation and follow the instructions herein.

Prior

to installation,

make

sure that

the

power outlet of

the place you

are

installing

the

device

follows

the

instruction

indicated

the device's label.

Sensitive to humidity! The device must not come

in contact with liquids or be exposed to excessive

moisture environments.

Fragile. Handle the device carefully, avoid impacts.

Recyclable product. Dispose appropriately in the

proper facilities.

This is a free manual and part of the product, thus, it cannot

be sold separately, copied or duplicated without the prior

written permission of Smith + Noble Home, Inc.

1 - INTRODUCTION

The Smith

& Noble

Smart Hub

is the main

device

of the

Smith

& Noble Smart Shades Platform. This

system

was

created

to integrate

motorized

window

treatments via APP, voice control, keypads and more.

2 - SAFETY AND RESPONSIBILY

Please read this guide carefully before installing and

using the product.

3 - FUNCTIONALITY

• Smith & Noble Motors Control;

• Create and Customize Scenes;

• Remote Access;

• Scheduling Feature;

• Supports 32 virtual remote controls

4 - TECHNICAL INFORMATION

• Input Voltage: 5vdc / 50-60Hzz;

• Communication: RF Commands;

• Radio Frequency: 433.92 Mhz;

• RF Signal Range: 60 ft;

• Storing Temperature Range: 0°C to +50°C;

• Humidity: +5% to 95% non-condensing;

• Wi-Fi network communication (2.4 Ghz)

•

FCC ID: 2AYLX-SNHUBV01

5 - HOW TO INSTALL

A - Download the APP on your smartphone

• When the APP is first launched the following

message will pop up; “Smith & Noble would like to send

you notifications”. Click on ”Allow” to receive important

notifications.

• Click on “Start”.

B - Follow the APP Instructions to Create your account.

C - Plug your Hub to the power outlet

D - The hub's LED will star blinking. Follow the

APP instructions.

6 - ADDING AND PAIRING RF MOTORS

•

On the APP Menu access settings and then "Add

New Device". Follow APP instructions for pairing.

You can add up 32 different blinds per Hub. To sync

other motors, repeat the same process.

7– FACTORY RESET

If you need to factory reset the Hub for any reason, press

and hold the reset button located on the back part of it.

The LED will start blinking. Hold the reset button pressed

until the LED becomes red and solid (approximately

40s), then release the reset button. The Hub will be reset

after 2 min and all the configurations will be lost.

FCC Radiation Exposure Statement:

This device meets the government's requirements for exposure to radio

waves. The guidelines are based on standards that were developed by

independent scientific organizations through periodic and thorough

evaluation of scientific studies. The standards include a substantial

safety margin designed to assure the safety of all persons regardless of

age or health. The SAR limit of USA (FCC) is 1.6 W/kg averaged.

Device types: Smart Hub (FCC ID: 2AYLX-SNHUBV01) has also been

tested against this SAR limit. SAR information on this and another pad

can be viewed onǦline at http://www.fcc.gov/oet/ea/fccid/.

Please use the device FCC ID number for search.

This device was tested simulation typical 10mm to body.

To maintain compliance with FCC RF exposure requirements, use

accessories should maintain a separation distance between the user's

bodies mentioned above, use accessories should not contain metallic

components in its assembly, the use of accessories that do not satisfy

these requirements may not comply with FCC RF exposure

requirements, and should be avoided.

FCC Warning

This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this

device must accept any interference received, including interference

that may cause undesired operation.

NOTE 1: This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment

generates uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or

more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

NOTE 2: Any changes or modifications to this unit not expressly

approved by the party responsible for compliance could void the user's

authority to operate the equipment.