PANTONE 201 C Wine & Beverage Cooler Manual We know you don’t want to read through this manual, but trust us, there’s good information in here.
IMPORTANT SAFETY PRECAUTIONS To reduce the risk of fire, electrical shock, or injury when using your appliance, follow these basic precautions: IF YOU READ NOTHING ELSE IN THIS MANUAL, PLEASE READ THIS Risk of child becoming trapped in wine cooler, beverage cooler, other refrigeration unit or large boxes. Junked or abandoned appliances, boxes and other containers are still dangerous, even if they will “just sit in the garage for a few days.
What’s in the box? • • • Instruction manual Handle Spare parts (hopefully you won’t need these) I received my wine or beverage cooler, now what? l l l l l Your wine or beverage cooler was designed to be built into kitchen or bar cabinets or it will work just fine as a stand alone appliance. Your choice. You should place your wine or beverage cooler on a flat, solid floor that is strong enough to support it when it is fully loaded (300-700 lbs).
Step 3. Using a Philips head screwdriver, push on the screw at the top of the door to make sure it’s protruding through the hole as far as possible and screw in to the appropriate hole on the handle. Do not fully tighten the screw into the handle at this point as it will make attaching the lower portion of the handle difficult. Once the upper screw is screwed into the handle, screw the bottom portion into the handle.
BEV116D – 190 Can Beverage Cooler BEV145SRE – 178 Can Beverage Cooler 5
BEV176D – Dual Zone Wine & Beverage Cooler REVERSING THE DOOR SWING • • • These instructions are based on a wine or beverage cooler assembled with a right hinged door. To reserve the door from right hinge to left hinge, you need to retrieve the Upper Left Hinge, and a Bottom Left Hinge from the spare parts pack shipped with your appliance. Save all extra hinges in case you need to change the direction of the door swing in the future.
2.Remove the door from the upper hinge and take out the support rod. 3. Unscrew the upper hinge and bottom hinge. 4. Pry out the plastic caps on the left side of the cabinet, and move them to the right side. 5. Install the hinge set that was included with your instruction manual on the opposite side.
6. Rotate the door 180o so that the top is now the bottom, and install it by attaching the support rod with screws. Quick Start Guide The control panel of your wine or beverage cooler has a saftey feature that prevents someone from accidentally changing the temperature or shutting the appliance off. the control panel will lock and be unresponsive to touch.
Best way to store bottles Your cabinet was designed to store a maximum number of standard sized Bordeaux wine bottles (Wine Cooler) and 12 oz cans (Beverage Cooler). We recommend that you observe the tips below to optimize loading. • Disperse the bottles and cans evenly to avoid concentrating weight in one place. Bottles and cans must not touch either the back of the cabinet or the step at the bottom.
What to do if something goes wrong? Many common issues with your wine cellar can be solved very easily. Try the troubleshooting tips below should you experience any problems. PROBLEM Appliance does not operate. Appliance is not cold enough. Appliance is turning on and off frequently. The light does not work. Vibrations. The appliance seems to make too much noise. The door will not close properly. The area around the door, top, or side is hot. POSSIBLE CAUSE Not plugged in.
SMITH & HANKS WARRANTY INFORMATION WITH PROOF OF SALE, the following warranty coverage applies when this appliance is correctly installed, operated and maintained according to all supplied instructions. FOR ONE YEAR from the date of sale this appliance is warranted against defects in material or workmanship. A defective appliance will receive free repair or replacement at option of Smith & Hanks.