Dear Customer, Thank you very much for purchasing a Smeg 50’s Style stand mixer. By choosing one of our products, you have selected an appliance which combines iconic style with innovative technical design and attention to detail. This appliance co-ordinates perfectly with other Smeg products, or equally a standalone statement piece in your kitchen. We hope you enjoy using your new appliance! For any further information please visit www.smeg50style.com or www.smeg.com.
Contents 1.1 1.2 1.3 1.4 1.5 1.6 1.7 Introduction This user manual Intended use General safety instructions Manufacturer liability Identification plate Disposal 2 Description 2.1 Product description 2.2 Standard accessories 3 Use 3.1 3.2 3.3 3.4 3.5 28 28 28 29 31 31 31 32 32 34 35 Before first use Using the stand mixer Using the pouring shield Functions Speed setting suggestions 4 Cleaning and care 4.1 4.2 4.3 4.4 4.
Instructions 1 Instructions 1.1 Introduction Key information for the user: Instructions General information on this user manual, on safety and final disposal. Description Description of the appliance and its accessories. Use Information on the use of the appliance and its accessories, advice on preparing recipes with the appliance. Cleaning and care Information for correct cleaning and care of the appliance. Safety instructions Information Advice 28 1.
1.4 General safety instructions Follow all safety instructions in order to be able to use the appliance safely. • Read this user manual carefully before using the appliance. • Switch off the appliance immediately after use. • Do not leave the appliance unattended while it is operating. • Disconnect the appliance from the power socket as soon as you have finished using it and before cleaning it. • Do not immerse the appliance, the power cord or the plug in water or any other liquid.
Instructions For this appliance • In order to avoid a hazard due to inadvertent resetting of the thermal cutout, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility. • Always disconnect the appliance from the supply if it is left unattended and before assembling, disassembling or cleaning.
1.5 Manufacturer liability The manufacturer shall not be held responsible for personal injuries or property damage caused by: • Any use of the appliance other than the one it was designed for • Not having read the user manual • Tampering with any part of the appliance • Use of non-original spare parts • Not following the safety instructions 1.6 Identification plate The identification plate bears the technical data, serial number and brand name of the appliance.
Description 2 Description 2.
Description Power and speed selector (3) Lever for speed selection. The ‘0’ position of the lever corresponds to the OFF position (appliance off). To start the appliance, position the lever on one of the 10 available speeds (positions 1-10), depending on the type of mixing required. See ”3.5 Speed setting suggestions” for more details and suggestions.
Description 2.2 Standard accessories Aluminium flat beater Aluminium dough hook For combining, mixing, and starting all mixing procedures. For preparing cake batters and pastries, biscuits, icing, etc. and for other, thicker batters and mixes. For slowly combining, mixing and kneading leavened dough type mixtures including bread, pasta, pizza, etc. Stainless-steel wire whisk Pouring shield For beating, mixing, whisking, whipping ingredients such as butter, eggs, cream, etc.
Use 3 Use Danger of electrocution • • • • • Plug into a grounded 3 prong outlet. Do not remove earth prong. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions could result in death, fire, or electrical shock. 1. Place the mixer on a flat, stable and dry surface. 2. Press the release button (1). 3. Hold down the button and raise the head (2), accompanying its movement with your hand. 2 3.1 Before first use 1.
Use 4. Insert the bowl (3) in its base (4). Grasp the bowl by its handle (5) and turn the bowl (3) clockwise until it locks into place. A 6. Insert the accessory (6) in the lower attachment (7) and push it upwards. Keep pressing the accessory upwards and turn it anticlockwise until the pin (8) locks fully into place. 3 7 6 4 B 5 5. Select the accessory required based on the type of mixing to be performed.
7. Add the ingredients to the bowl. 8. To close, bring the motor head down by pressing the release button (1), and then tilt the motor head (2) backwards slightly until it releases. 9. Keep the button pressed down and lower the head (2), accompanying its movement with your hand. 11. Check that the speed selector (10) is positioned on ‘0’ (OFF). 12. Insert the plug into the power socket. 13.
Use Moving parts Danger of personal injury and damage to the appliance • Do not touch the accessories while the appliance is moving • Do not operate the mixer with the accessory inserted and the bowl empty. 3. Press the release button (1) to raise the head (2). 2 When you have finished using the mixer: 1. Position the speed selector (10) on ‘0’ (OFF) and remove the plug from the socket. 2. Remove the pouring shield, if it is on the bowl (9).
Use 5. Remove the bowl (3) from its base (4) by turning it anticlockwise to release it. EN IT 4. Push the accessory (6) upwards slightly and turn it clockwise to unlock it from the pin (8). Extract the accessory (6) from the lower attachment (7).
Use 3.3 Using the pouring shield 1. Fit the pouring shield (1) to the upper lip of the bowl after inserting the bowl in its base, the accessory in the lower attachment and lowering the head to the operating position. 2. Fit the pouring shield with the opening (1) facing outwards in order to add ingredients to the bowl without stopping the mixer. 1 1 Moving parts Risk of damage to the pouring shield • Remove the pouring shield to raise or lower the head with the accessory fixed to the lower attachment.
3.4 Functions Planetary movement Safety lock system The planetary movement is generated by rotation (1) of the accessory around its axis in the opposite direction to the rotary movement (2) of the mixer. This movement maximises coverage of the entire bowl with consistent results for all mixtures. The appliance has a safety system which automatically shuts off the appliance when the motor head is raised.
Use 3.5 Speed setting suggestions The speed selector shows the most appropriate accessory to use with the selected speed. The speeds indicated in the table are approximate and can vary depending on the recipe and the interaction of the different ingredients used. Speed setting LOW 1-3 MEDIUM 4-7 HIGH 8 - 10 42 Function COMBINING AND KNEADING Combining ingredients. Kneading - preparing leavened doughs (bread, pizza, confectionery, etc.). MIXING Mixing and beating dense batters.
General advice Recommendations for recipes using eggs • Turn on the appliance at a low speed until all the ingredients are mixed, then increase the speed on the basis of the required operation. • When adding ingredients, always pour them onto the edge of the bowl and not directly onto the moving accessory. • Reduce the speed when you add dry or liquid ingredients to stop them splattering or being ejected from the bowl. Increase the speed again when they have been mixed in.
Use Recommendations for kneading • Use speed setting 2 or 3 to knead leavened doughs or particularly tough mixtures such as egg pasta. Using the appliance on higher speeds with these stiffer doughs would risk overloading it, increasing the probability of a malfunction. • Do not exceed 1000 g of standard flour or 800 g of wholewheat or strong flour (e.g. bread flour). • When preparing egg pasta, do not exceed a quantity equivalent to using 3 medium eggs and add small quantities of water if necessary.
4 Cleaning and care 4.2 Cleaning the surfaces 4.1 Instructions To keep the surfaces in good condition, they should be cleaned regularly after use. Let them cool first. Improper use Danger of electrocution • Switch off and unplug the appliance before cleaning the mixer and its standard and optional accessories. Improper use Risk of damage to surfaces • Do not use steam jets to clean the appliance.
Cleaning and care 4.5 What to do if... Problem Possible cause The motor has overheated. Solution Disconnect the mixer from the power and leave the motor to cool. Insert the plug into the power socket. Do not use The plug is not properly inserted in adaptors or extensions. the power socket. Check that the house main breaker is on. The motor will not start The cable is defective. Have the cable replaced at an Authorised Service Centre. Lack of power. Check that the house main breaker is on.
Cleaning and care Possible cause Solution EN IT Problem The mixer is not resting on a stable Place the mixer on a flat, surface. stable surface. The anti-slip rubber feet are worn. Have them replaced at an Authorised Service Centre. The mixer vibrates The speed used is too high or the Set a lower speed and ensure the bowl has not load is excessive. been overfilled. Check that the bowl is The bowl has not been correctly correctly locked into its locked into its base. base.
Cleaning and care Problem The accessory is struggling to turn inside the bowl Possible cause The dough mixture is too thick and Add water or other liquid to is stopping the accessory from loosen the dough mixture. turning. The bowl is too full. If the problem has not been resolved or in the event of another type of fault, contact your local technical support centre. 48 Solution Remove half the bowl’s contents and work it separately.
Il costruttore si riserva di apportare senza preavviso tutte le modifiche che riterrà utili al miglioramento dei propri prodotti. Le illustrazioni e le descrizioni contenute in questo manuale non sono quindi impegnative ed hanno solo valore indicativo. The manufacturer reserves the right to make any changes deemed useful for improvement of its products without prior notice. The illustrations and descriptions contained in this manual are therefore not binding and are merely indicative.