Datasheet

KDD90VXE
90cm Island Downdraft Hood, Stainless Steel and black
glass
EAN13: 8017709203061
1 high performance motor, 275W
Electronic controls
4 speeds, plus intensive (10min)
1 x 6W LED light
2 aluminium grease filters
Filter cleaning/replacement indicator
Automatic switch- off
Internal re-circulation possible
Non return valve
Vent outlet Ø 150mm
Nominal power 275W
KITRBDD included: Remote motor kit allowing to position motor away from the
body of the hood
Speed
I
II
III
IV
Int
Extraction Rate IEC 61591
220
380
450
530
710
Noise Level dB(A) IEC 60704 -2-13
46
57
61
65
70
NB: Downdraft extractors can be installed anywhere in a kitchen but are ideal for when
a hob is situated in an island unit. The extractor is installed under the worktop directly
behind, or to the side of, the hob so that when it is not in use, it can be completely
hidden from view. A Downdraft extractor can be vented or recirculated. When it is
vented the ducting has to be passed under the flooring, below the cupboards or along
the back of the cupboards - it is important therefore to decide on the hood before
refurbishment work begins. The length of the ducting will affect the extraction
performance, if it has to travel too far to go to an outside wall or there are too many
turns in the ducting you are advised to recirculate the extractor.
NB: This model supersedes the KDD90VE
Functions
Options
KITFCDD - Charcoal filter kit for model KDD90VXE
RCKF - Remote control to enable use as ceiling hood
SP150 - Simple ducting kit (150mm wide)
SP150FLAT - Comprehensive ducting kit (150mm wide)
Smeg (UK) Limited
3 Milton Park, Abingdon
Oxon OX14 4RN
Tel. [phone]
Fax [phone]