Instruction Manual

INSTRUCTIONS: (EN)
The hood must be customised by the customer
with two wooden/similar frames
- (A) Flue Frame
- (B) Bottom frame
The design of the frames can be defined by the
customer and respecting the measurements
provided to correctly secure the frame to the
hood.
ATTENTION:
If the hood is installed between suspended units
90 cm away, also respect the external
measurement suggested for the bottom frame.
Secure the frames to the hood using Ф3.5x8
wooden screws through the specific holes (X)
BOTTOM FRAME MEASUREMENTS (B)
FLUE FRAME MEASUREMENTS (A)
(B) Bottom Frame
(X)
(X)
(90 cm hood)
(A) Flue Frame