User manual

EN-7
EN
Description / Use
• The accessories intended to
come into contact with food are
made of materials that comply
with the provisions of current
legislation.
• To avoid damage to the blender,
the appliance is equipped with
a safety lock system that shuts
off its operation when the jug
is removed. It also features a
motor safety cutout which trips if
the motor is overloaded.
2.4 Description of controls
Pulse button (6)
This function allows you to use maximum
blending speed.
Control knob (7)
The knob allows you to select one of the
four speeds available or to start the two
preset programs: smoothie and ice crush.
See ”3.4 Speed setting suggestions” for
further information on which speed to use.
START/STOP button (8)
The button is used to start/stop blender.
3 Use
3.1 How to remove the blade
assembly (Fig. B)
• Take hold of the handle (9) and lift the
blender jug. Remove the lid (2) from the
blender jug and the measuring cup (1)
from the lid.
• Turn the jug upside down and place it on
a flat surface. Insert the open end of the
measuring cup (1) into the base of the
blade assembly.
• Unscrew the blade assembly (4) from
the jug body, turning the measuring cup
(1) counterclockwise. Remove the blade
assembly (4) from the jug body using
your hand.
• Wash the components as indicated in
section ”4 Cleaning and care”.
• Thoroughly dry all the components as
indicated in section ”4 Cleaning and
care” and put the blade assembly back
into the jug body following the procedure
indicated previously in the reverse order.
Make sure to insert the blade assembly
until it locks into place.
3.2 Using the blender
(Fig. C)
• Insert the blender jug onto the motor
base.
• Introduce the ingredients into the jug,
paying attention not to exceed the
maximum capacity (1.5 l - 6 cups).
• Position the lid (2) with the measuring cup
(1) fitted onto the blender jug. Ensure the
lid is secure.
• Insert the plug of the blender into the
power outlet. The red LED will turn on to
indicate the power is on.