ADP 8252 D I S H WA S H E R How to get the most from your Fully Integrated Dishwasher
A Helping Hand on the Home Front From now on washing dishes, glassware, cutlery and saucepans should be as simple as loading your dishwasher and switching on. We strongly recommend you take the time to read this leaflet fully from cover to cover. It may seem like a chore, but it'll pay off in the long run. Contents Page No.
Installation 1 Your brand new dishwasher complies with stringent EEC specifications and is fully compatible with any 600mm deep kitchen units. If you are reasonably handy at DIY, installing your dishwasher should be relatively straight forward as long as you stick to the following guidelines. If you have any doubts about installing this product we suggest you seek professional advice. IMPORTANT The electrical supply, water supply and drain should NOT be positioned directly behind the appliance.
Installation cont... 2 Stage 1 Supplied with the appliance is a metal anti-condensation strip, this should be fixed to the underside of your worktop along the front edge (via the two outer screws). Also supplied with the appliance are two plastic skids, which should be positioned below the adjustable feet and allow the appliance to positioned easily.
Installation cont... 3 Stage 4 Position the decor door onto the front of the dishwasher by locating the brackets into the two mouldings mounted either side on the top of the door. NOTE: to remove the door a small plastic tool is provided. This should be inserted into the small black mouldings on the side of the door, rotated and pulled away from the appliance. The decor door can now be removed from the appliance. Stage 5 Align the top of the decor door with adjacent cabinets.
Loading 4 The dishwasher has a capacity of 12 place-settings including serving dishes. Before loading the dishes, remove the largest scraps of food to avoid blocking the filter. Very dirty pans of frying-pans must be soaked in water before they are placed in the dishwasher, to allow food waste to be removed more easily. Put pans in the bottom basket.
Loading cont... 5 Adjusting the Top Basket The top basket can be in two different positions depending on the height of the dishes. - Pull out the right-hand basket guide; - remove the stop, first releasing it as shown in the diagram; - push the guide to free the wheels; - fit the upper or lower pair of wheels into the guide depending on the setting required; - return the stop to its original position. This will allow large diameter plates to be loaded into the bottom basket.
Your Dishwasher 6 WARNING After loading, ensure that both spray arms are free to rotate. We cannot accept responsibility for damage caused by incorrect loading.
Detergent and Rinse Aid Dispenser 7 The detergent and rinse aid dispenser are on the inside of the door. The detergent dispenser is on the left and the rinse aid dispenser is on the right. Fill the dispenser with detergent before each wash. Filling with detergent To open the detergent dispenser press the button gently. The lid will spring out. Pour in the detergent and close the lid. The dispenser is opened automatically during washing.
Water Softener 8 The dishwasher is equipped with an automatic softener which uses regenerating salts specially developed for dishwashers to remove hardening substances from the water. Hard water leaves whitish marks on the dry dishes, and dishes gradually lose their shine over time. The appliance is preset to dispense the right amount of salt on the basis of the hardness of the mains water. N.B. The appliance leaves the factory with a medium setting (2).
The First Wash 9 Switching on The dishwasher must not be turned on until the dishes have been loaded, the dispenser has been filled with detergent, a check has been made that the spray arms turn freely, and the door has been shut. The water tap must also be turned on and salt placed in the container. To simplify programming and communication, the dishwasher is equipped with an "Information Display" (see diagram page 10). 6 7 8 9 10 Indicates the programme selected/delayed start/alarms.
The First Wash cont... 10 Deleting/Changing the Programme To abort a programme in progress simply open the door and select programme "P0". When the door is closed, the dishwasher will force an early end to the programme. To change a programme already in progress simply set the new number corresponding to the programme desired. When the door is closed, the dishwasher will automatically start the new programme.
(****) RINSE 8 NO 70°C 70°C 70°C 55°C 55°C 65°C 65°C 45°C 45°C 45°C NO Wash NO YES YES YES YES YES YES YES YES YES YES NO 1 st Rinse YES YES YES YES NO NO NO NO YES NO NO NO 2 st Rinse 65°C 70°C 70°C 70°C 65°C 65°C 65°C 65°C NO 55°C 65°C NO YES YES YES YES YES YES YES YES NO YES YES NO Rinse Aid Drying Rinse - - * - * - * - - * - - Eco * = Press "ECO" button.
Cleaning and Maintenance 12 Cleaning the Appliance Make sure that the appliance is disconnected from the electrical mains. The outside surfaces and the inside of the door of the dishwasher must be cleaned regularly with a soft, damp cloth. Never use abrasive or acid detergents. The door seals must be cleaned with a damp sponge. The outside of the appliance may be cleaned with a normal detergent for painted surfaces.
How to Deal with Small Problems If the dishwasher is to be out of use for a long period The following precautions must be taken: - perform two consecutive pre-rinses; - disconnect the plug from the mains; - leave the door slightly open so that no unpleasant smells can form; - turn off the water tap.
General and Technical Details EN 50242 14 EN 50242 Technical Details Capacity Intake Power Supply Voltage Fuse Rating Width of Appliance Depth of Appliance Dimension with Door Open 12 place settings 1÷9 bar 230 V 13 Amps 60 cm 57 cm 116 cm
Not Working Properly? 15 Check These Points First The electronic control system is capable of detecting 6 possible dishwasher malfunctions. Therefore before calling the After-Sales Service, users are advised to consult the list below, and in all cases to make a note of the error messages. Alarm E1 NOT USED ON THIS APPLIANCE. Alarm E2 The system which limits the water level inside the dishwasher (Safety Level) has been tripped. Since this might be a temporary fault, try reprogramming the machine.
Not Working Properly cont...
Electrical Connections 17 IMPORTANT: ENSURE THAT THE ELECTRICITY SUPPLY IS SWITCHED OFF BEFORE CONNECTING. Your appliance must be connected to fixed wiring via the use of a double pole switched fused spur outlet with at least 3mm contact separation. (See technical data for fuse rating). We strongly recommend the appliance is connected by a qualified electrician who is a member of the N.I.C.E.I.C who will comply with the I.E.E. and any local regulations.
12 Months Guarantee 18 GUARANTEE CONDITIONS (a) Any claim during the period of the guarantee MUST BE ACCOMPANIED WITH THE RECEIPT relating to the original purchase. (b) The unit must be correctly installed and operated in accordance with the manufacturer's instructions and used for normal domestic purposes. (c) The guarantee does not cover accidental damage, misuse or alterations which are likely to affect the units.