User Guide www.smdv.co.
Specification Model : FlashWave-5 TX Operating Frequency : 2.402 ~ 2.481 GHz Channel : 80 RPT-Times ② MODE Button ① Camera Selection ⑬ (TTL/M/M+HSS/TTL+HSS) 2.5mm Sync Jack ⑫ Power ⑪ (-) Down ⑩ Group : 4 Sync Speed : 1/8000 sec Maximum Working Range : 70m ③ RPT-Hz Battery : AAA 1.5V x 2 Dimensions : approx. 78.
No. Name of part ① MODE Button ② RPT-Times ④ Channel Setting ⑥ Battery ⑦ Group Setting ⑧ LED Modeling ③ ⑤ RPT-Hz Test Description The TTL, Manual(M), Manual High Speed sync(M+HSS), TTL and High Speed Sync(TTL+HSS mode) are selectable. · TTL - The Flash will calculate the correct flash exposure then fire the exact flash output for the subject when the camera shutter speed is set under 1/250 sec. The Flash exposure compensation is adjustable +/-0.1~3 in 0.1 stop increments.
No. Name of part ⑨ (+) Up ⑩ (-) Down ⑨+⑩ Exposure Compensation Value Delete ⑪ ⑫ ⑬ Power Description The Flash output level increases (+) 0.1 stop each by single-pressing this button. In TTL mode, the flash exposure compensation will be adjustable in +/-0.1 ~3. The Flash output level decreases (-) 0.1 stop each by single-pressing this button. In TTL mode, the flash exposure compensation will be adjustable in +/-0.1 ~3.
FCC Part 15.19 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Part 15.21 Any changes or modifications (including the antennas) to this device that are not expressly approved by the manufacturer may void the user's authority to operate the equipment.