Modular/F.R.L.
Modular F.R.L. Units Series AC Improved installation Improved visibility for lubricant drip with graduation for lubricant control Bracket with spacer Retainer Graduation 5 6 3 2 8 SMC 4 7 9 1 Spacer with bracket Lever pin q Attach the component into the fitting of the spacer with bracket. w Lock the lever pin into the retainer. (temporary installation) Embedded pressure gauge is a standard feature.
Series Configuration Product Port size Model Page M5 x 0.
Series Configuration Product Port size Model Page M5 x 0.
Series Configuration Product Port size Model Page M5 x 0.
Air Combination Air Filter + Regulator + Lubricator AC10 to AC60 JIS Symbol Air Filter How to Order AC 30 03 DE Description Body size 10 N Note 1) F Note 2) Metric thread (M5) Rc NPT G M5 01 02 03 04 06 10 M5 1/8 1/4 3/8 1/2 3/4 1 Nil + Port size + a Float type auto drain Nil C D + Nil Option Note 3) Pressure gauge b Digital pressure switch E G M E1 E2 E3 E4 + c Check valve d Pressure switch Nil Nil Without attachment Attachment S Note 5) Mounting position: AF+AR+S+AL +
Air Combination Series AC10 to AC60 AC20 Description Symbol Body size 10 i AC40 20 25 30 40 50 55 60 Nil With drain cock Drain guide 1/8 Filter J Note 9) drain port Note 8) Drain guide 1/4 W Note 10) Drain cock with barb fitting: For ø6 x ø4 nylon tube Semi-standard + j Lubricator lubricant exhaust port k Exhaust mechanism Nil + Nil N + l Flow direction Nil Pressure unit Relieving type Non-relieving type R Flow direction: Left to right Flow direction: Right to left Nil Na
Series AC10 to AC60 Flow Characteristics (Representative values) AC10 M5 x 0.8 Condition: Inlet pressure 0.7 MPa AC20 0.5 0.4 0.3 0.2 0.1 0 0 25 50 75 100 125 0.5 0.4 0.3 0.2 0.1 0 0 150 200 Rc3/8 0.4 0.3 0.2 0.1 0 0 800 Rc1/2 0.4 0.3 0.2 0.1 1000 0.4 0.3 0.2 0.1 0 0 1000 Flow rate (l/min (ANR)) Rc1 2000 0.4 0.3 0.2 0.1 0 0 3000 Rc1 0.4 0.3 0.2 0.1 4000 6000 8000 0.5 0.4 0.3 0.2 0.
Air Combination Pressure Characteristics (Representative values) 0.15 0.25 Outlet pressure (MPa) Outlet pressure (MPa) Set point 0.2 0 AC60 AC55 0.25 Set point 0.2 0.15 0 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 0 1.0 Inlet pressure (MPa) to AC60 Conditions: Inlet pressure 0.7 MPa, Outlet pressure 0.2 MPa, Flow rate 20 l/min (ANR) 0.25 Outlet pressure (MPa) AC50 Series AC10 Set point 0.2 0.15 0 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 0 0 0.2 0.3 Inlet pressure (MPa) 0.
Series AC10 to AC60 Dimensions AC10, AC20 AC25 to AC60 P2 S AC20 to AC60 Square embedded type pressure gauge AC10 to AC60 H Center of piping AC20 B O 1/4 Width across flats 17 Square type pressure gauge Digital pressure switch Round type pressure gauge Round type pressure gauge (with color zone) H J H J H J H J — — — — ø26 26 — — 2 Note) 쏔28 29.5 쏔27.8 40 ø37.5 65 ø37.5 65 27.5 0 쏔28 28.5 쏔27.8 39 ø37.5 64 ø37.5 64 29.5 3.5 쏔28 30.5 쏔27.8 41 ø37.
Air Combination Filter Regulator + Lubricator AC10A to AC60A JIS Symbol Filter Regulator How to Order AC 30 A 03 DE • Option/Semi-standard: Select one each for a to l. • Option/Attachment/Semi-standard symbol: When more than one specification is required, indicate in alphanumeric order.
Air Combination Series AC10A to AC60A AC20A AC40A Symbol Description Body size Semi-standard 10 i Lubricator lubricant exhaust port Nil j Exhaust mechanism Nil 3 + N + k Flow direction Nil l Pressure unit 30 40 50 60 Without drain cock Lubricator with drain cock Relieving type Non-relieving type R Flow direction: Left to right Flow direction: Right to left Nil Name plate and pressure gauge in imperial units: MPa + 20 Z Note 11) Name plate, caution plate for bowl, and pressure
Series AC10A to AC60A Dimensions AC10A, AC20A AC30A to AC60A P2 P2 (Pressure gauge port size) (Pressure gauge port size) A J F F J M K R1 S Drain Filter Regulator AC20A to AC60A O H AC30A to AC60A 1/8 ø10 one-touch Width across flats 14 fitting M5 x 0.8 S 1/4 Width across flats 17 P1 P2 1/16 M5 x 0.
Air Combination Air Filter + Regulator AC10B to AC60B Air Filter How to Order AC 30 B Description Body size 10 N Note 1) F Note 2) Metric thread (M5) Rc NPT G M5 01 02 03 04 06 10 M5 1/8 1/4 3/8 1/2 3/4 1 Nil + Port size + a Float type auto drain Nil C D + Nil Option Note 3) Pressure gauge b Digital pressure switch M E1 E2 E3 E4 Nil Without attachment G Attachment + c Pressure switch T-interface 3-port valve for d residual pressure release Without auto drain Float type auto
Air Combination Series AC10B to AC60B AC20B AC40B Description Symbol Body size 10 Exhaust mechanism Semi-standard h Nil N + i Flow direction Nil j Pressure unit 25 30 40 50 55 60 Relieving type Non-relieving type R Flow direction: Left to right Flow direction: Right to left Nil Name plate and pressure gauge in imperial units: MPa + 20 Note 13) Z Note 11) Name plate, caution plate for bowl, and pressure gauge in imperial units: psi, °F ZA Note 12) Digital pressure switch: With
Series AC10B to AC60B Dimensions AC25B to AC60B (Pressure gauge port size) F OUT Q1 Air Filter AC20B to AC60B AC10B to AC60B Digital pressure switch O AC25B to AC60B 1/8 ø10 one-touch Width across flats 14 fitting M5 x 0.8 S 1/4 Width across flats 17 P1 P2 M5 x 0.
Air Combination Air Filter + Mist Separator + Regulator AC20C to AC40C JIS Symbol Air Filter Mist Separator Regulator How to Order AC 30 C • Option/Semi-standard: Select one each for a to j. • Option/Attachment/Semi-standard symbol: When more than one specification is required, indicate in alphanumeric order.
Air Combination Series AC20C to AC40C AC20C Symbol AC40C Description Body size Semi-standard 20 i Flow direction R Flow direction: Left to right Flow direction: Right to left Nil Name plate and pressure gauge in imperial units: MPa Nil + j Pressure unit Z Note 11) Name plate, caution plate for bowl, and pressure gauge in imperial units: psi, °F ZA Note 12) Digital pressure switch: With unit conversion function Note 1) Drain guide is NPT1/8 (applicable to the AC20C) and NPT1/4 (applicable
Series AC20C to AC40C Dimensions AC25C to AC40C-06 P2 F J N (Pressure gauge port size) N M C OUT IN B R1 Digital pressure switch Square embedded type pressure gauge Drain Air Filter Mist Separator Regulator J H Center of piping Center of piping Center of piping AC20C S B P1 1/8, 1/4 AC20C 1/4, 3/8 AC25C 1/4, 3/8 AC30C 1/4, 3/8, 1/2 AC40C 3/4 AC40C-06 Barb fitting Applicable tubing: T0604 Optional specifications Square type pressure gauge Digital pressure switch Round type pressur
Air Combination Filter Regulator + Mist Separator AC20D to AC40D Filter Regulator How to Order AC 30 D Description Body size 20 Nil Thread type N Note 1) F Note 2) Rc NPT G 01 02 03 04 06 1/8 1/4 3/8 1/2 3/4 + Port size + a Float type auto drain Nil C D + Option Pressure gauge b Digital pressure switch Without pressure gauge Square embedded type pressure gauge (with limit indicator) Round type pressure gauge (with limit indicator) Round type pressure gauge (with color zone) Output: NPN
Air Combination Series AC20D to AC40D AC20D Symbol Description AC40D Body size Semistandard 20 Nil j Pressure unit Note 1) Drain guide is NPT1/8 (applicable to the AC20D) and NPT1/4 (applicable to the AC30D to AC40D). The auto drain port comes with ø3/8" one-touch fitting (applicable to the AC30D to AC40D). Note 2) Drain guide is G1/8 (applicable to the AC20D) and G1/4 (applicable to the AC30D to AC40D). Note 3) Option G, M are not assembled and supplied loose at the time of shipment.
Series AC20D to AC40D Dimensions AC20D AC30D to AC40D-06 P2 (Pressure gauge port size) P2 (Pressure gauge port size) A F J F J R 2 R1 R1 B Filter Regulator Mist Separator Digital pressure switch H Center of piping AC20D AC30D to AC40D-06 S 1/8 ø10 one-touch Width across flats 14 fitting M5 x 0.
Air Combination Series AC Options/Attachments Type Round type Round type (with color zone) Square Note 2) embedded type Digital pressure switch Float type auto drain Spacer NPN output/Wiring bottom entry NPN output/Wiring top entry PNP output/Wiring bottom entry PNP output/Wiring top entry Note 5) — AD27 Y200 AKM2000-쏔01 (쏔02) IS1000M-20 Y210-쏔01 (쏔02) — AD17 Y100 N.O. N.C.
Series AC Pressure Switch: (S) A compact integrated pressure switch can be easily installed and facilitates the pressure detection of the line. IS1000M 30 JIS Symbol Pressure switch Description Lead wire length Set pressure range Pressure display 0.5 m 0.5 m 0.5 m 0.5 m 3m 3m 3m 3m 0.1 to 0.4 MPa 0.1 to 0.4 MPa 0.1 to 0.6 MPa 0.1 to 0.6 MPa 0.1 to 0.4 MPa 0.1 to 0.4 MPa 0.1 to 0.6 MPa 0.1 to 0.
Attachments Series AC Pressure Relief 3 Port Valve: (V) With the use of a 3-port valve for residual pressure release, pressure left in the line can be easily exhausted. 03 JIS Symbol (A) 2 • Semi-standard: Select one each for a to b. • Semi-standard symbol: When more than one specification is required, indicate in alphabetic order.
Series AC Piping Adapter: M5 x 0.8, 1/8, 1/4, 3/8, 1/2, 3/4, 1 Port size B A piping adapter allows installation/removal of the component without removing the piping and thus makes maintenance easier. D A Model Note 1) E100-M5 E200-쏔01 E200-쏔02 E200-쏔03 Center of F.R.L. body E300-쏔02 E300-쏔03 E300-쏔04 E400-쏔02 E400-쏔03 E400-쏔04 E400-쏔06 Port size M5 x 0.8 1/8 1/4 3/8 1/4 3/8 1/2 1/4 3/8 1/2 3/4 E500-쏔06 3/4 E600-쏔06 3/4 E600-쏔10 1 A B D Applicable model 10 14 14 30 23.
Series AC Spacers/Brackets Accessories Spacer D C Center of F.R.L. body RELEASE Y200 Y400 2 X Model A B C D Applicable model Y100 Y200 Y300 Y400 Y500 6 3 4 5 5 27 35.5 47 57 61 15 18.5 26 31 33 33 48 59 65 75 AC10, AC10A, AC10B AC20쏔 AC25쏔, AC30쏔 AC40쏔 AC40쏔-06 AC50, AC55, AC60 AC50A, AC60A AC50B, AC55B, AC60B Y600 6 75.5 41 86 X-X B 1 Seal A (Spacer width) Replacement Parts Description Material Seal HNBR Note 2) Part no.
Series AC Mounting Position for Spacer with Bracket Bracket Pressure switch: S T-interface: T 3-port valve for residual pressure: V Check valve: K SUP. OUT IN OUT IN Bracket A1 Attachment Model AC10 AC20 AC25 AC30 AC40 AC40-06 AC50 AC55 AC60 Attachment Model AC10 AC20 AC25 AC30 AC40 AC40-06 AC50 AC55 AC60 A2 K A2 — 43 57 57 75 — — — — A1 — 41.5 55 55 72.5 — — — — A2 — 43 57 57 75 — — — — A3 — 57 74 74 95 — — — — A2 43 57 75 — — — A1 41.5 55 72.5 77.
SP093-001I Issued: Sep 2009 P.G. Information SMC Corporation of America 10100 SMC Boulevard Noblesville, IN 46060 Epoxy Coated F.R.L.Units www.smcusa.com AC21/31/41-***-*-X2217 AF20/30/40-***-*-X480 AR20/30/40-***-*-X48 AL20/30/40-***-*-X480 AW20/30/40-***-*-X48 VHS20/30/40-***-*-X513 Y20/30/40*-T4 Application: Air preparation in an environment that requires enhanced corrosion protection. Feature 1: Die cast aluminum components are epoxy coated for improved chemical resistance.
F.R.L.
F.R.L. Unit Series AC21~41 AC AA M J F N V Q C (2) - P1 (Port Size) OUT IN B Q K A E G W AC-A AA J F Bowl Detail (AF20/AW20) N C Q OUT IN Note: Sight glass not applicable to all size 20 bowls. B Q K P2 (Gauge Port Size) W E A AC-B Min. Clearance For Maintenance Bracket and Relief Valve (Optional) U G V (2) - P1 (Port Size) D M Min.
Filter Series AF20~40 How To Order AF 30 — N 03 D — 8 Z - X480 Filter With External Epoxy Coating, Stainless Fasteners Name Plate, Caution Plate On Bowl in psi, ˚F Body Size Symbol Size 20 1/8 30 3/8 40 1/2 Bowl Applicable Body Size Symbol Description 20 2 Metal Bowl 30, 40 8 Metal Bowl With Sight Glass NPT Threads Port Size Symbol Port Size 02 1/4 03 3/8 04 1/2 Accessories Symbol Description Nil None B* Mounting Bracket C Float Auto Drain (N.C.) D Float Auto Drain (N.O.
Filter Series AF20~40 S F Standard (Manual Drain) W 4 -T R G K J 2-A Bowl Detail U (AF20) Q E L H M C P N BRACKET MOUNTING THREAD OUT D IN Bracket (Optional) D Note: Sight glass not applicable to AF20.
Filter - Regulator Series AW20~40 How To Order AW 30 — N 03 D — 8 Z - X48 Filter - Regulator With External Epoxy Coating, Stainless Fasteners Name Plate, Caution Plate On Bowl in psi, ˚F Body Size Symbol Size 20 1/8 30 3/8 40 1/2 Bowl Applicable Body Size Symbol Description 20 2 Metal Bowl 30, 40 8 Metal Bowl With Sight Glass NPT Threads Port Size Symbol Port Size 02 1/4 03 3/8 04 1/2 Accessories Symbol Description Nil None B* Mounting Bracket C Float Auto Drain (N.C.) D Float Auto Drain (N.O.
Filter - Regulator Series AW20~40 Standard (Manual Drain) PANEL FITTING OUT CC Z IN V U AA K Bowl Detail EE (AW20) L X H Y Q OUT IN Note: Sight glass not applicable to AW20.
Regulator Series AR20~40 How To Order AR 20 — N 02 B — Y Z - X48 Regulator With External Epoxy Coating, Stainless Fasteners Name Plate, Caution Plate On Bowl in psi, ˚F Body Size Symbol Size 20 1/8 30 3/8 40 1/2 Handle Orientation Symbol Description Nil Handle Down Y Handle Up NPT Threads Port Size Symbol Port Size 02 1/4 03 3/8 04 1/2 Accessories Symbol Description Nil None B* Mounting Bracket H* Panel Mount Nut Applicable Body Size 20 30 40 Note: Other sizes, thread forms, options, etc.
Lubricator Series AL20~40 How To Order AL 20 N 02 B — — 2 Z - X480 With External Epoxy Coating, Stainless Fasteners Lubricator Body Size Symbol Size 20 1/8 30 3/8 40 1/2 Name Plate, Caution Plate On Bowl in psi, ˚F Bowl Applicable Body Size Symbol Description 20 2 Metal Bowl 30, 40 8 Metal Bowl With Sight Glass NPT Threads Port Size Symbol Port Size 02 1/4 03 3/8 04 1/2 Accessories Symbol Description Nil None B* Mounting Bracket Applicable Body Size 20 30 40 Applicable Body Size All All *Note
H With the use of a 3 port valve for residual pressure release, pressure left in the line can be easily exhausted. G F Ø 1 Residual Pressure Relief 3 Port Valve (V) 2Ø 10 Accessories JIS Symbol Lockable at the time of exhaust E (A) 2 C D 1 3 (P) (R) Effective area mm2 (Cv) IN to OUT 14 (0.76) 31 (1.68) 55 (2.98) OUT to EXH 16 (0.87) 29 (1.57) 42 (2.28) Paint color (Standard) Handle: Red Body: Platinum silver Use an air filter on the IN side for operating protection.
Accessories Spacer Dimensions mm Epoxy Coated Aluminum, Stainless Screws, NBR Seals F.R.L. center Interface With T Bracket Model A Y20-T4 Y30-T4 Y40-T4 10 11 14 Interface with T-type bracket T-type bracket Epoxy Coated Aluminum, Stainless Screws, NBR Seals G H F.R.L. Body center L D A R F C E B Dimensions Interface With T Bracket Y20T-T4 Y30T-T4 Y40T-T4 mm A B C D E F G H R L Applicable Models 24 35 40 15 16 22 5.5 7 9 3 4 4 30 41 50 5 7 7 10 11 14 48 70 80 2.75 3.
Salt Spray Test Results (for reference) 1. Test Conditions 1) Method: In compliance with ASTM B117-07a (JIS Z 2371), leave parts in a salt spray test chamber, and compare rust generation. 2) Conditions: Temperature: 95˚F (35˚C) Salt Water Concentration: 5% 3) Time: 1000 hours [Frequency: 0hr, 24hrs, 48hrs, 72hrs, 96hrs, 168hrs, 240hrs, 480hrs, 720hrs, 1000hrs] 4) Samples: Parts for AF and AW30 (See Figure 1.
Modular Adapter Series E210/310/410 Easy connection to existing products! With hexagonal hole AC-A Uni 1/8 to 1/2 AF-A AF-A AR-A Flexible mounting Can be connected to existing products such as 2 port valves as well as F.R.L. Unit Can be freely rotated, thus allowing a wide selection of mounting directions Can be connected to existing products of different size Ex.: AF30+ARG20 AL-A Location of pressure gauge can be fixed depending on the installation location. AW-A Ex.
Application Examples Ex. 3 Front face mounting of regulator with built-in gauge handle Ex. 4 Cross spacer to branch mounting Cross spacer (Y34-02) Regulator with built-in gauge handle (ARG20) Modular adapter (E210-U02) Spacer (Y200) Modular adapter (E210-U02) Modular adapter (E310-U02) Spacer (Y300T) Air filter (AF30) Regulator with built-in gauge handle (ARG20) Ex. 6 T-spacer to downward face mounting (2) Ex.
Modular Adapter Series E210/310/410 AC-A How to Order AF-A AF-A E310 U 03 AR-A Size Port size Symbol Uni thread 01 02 03 04 Thread U AL-A Piping port size 210 310 410 Uni thread 1/8 1/4 3/8 1/2 210 — — Size 310 — — AW-A 410 — AC AF AF AR Specifications AL Model E210 E310 E410 Port size 1/8 1/4 1/4 3/8 1/4 3/8 1/2 Piping I.D. ø6 ø8 ø8 ø10 ø8 ø10 ø12 Air E AV Proof pressure 1.5 MPa Maximum operating pressure 1.
Series E210/310/410 Construction E210-U01 E310-U02, U03 E410-U02, U03, U04 q E210-U02 w e q r w e Component parts No. 1 2 Description Joint nipple Adapter Material Brass Zinc die-cast Replacement parts No. 3 4 Description O-ring O-ring Material NBR NBR E210-U01 E210-U02 E210P-040S — E210P-030S E210P-050S Dimensions Part no.
Modular Adapter Series E210/310/410 Option Modular Plug How to Order Dimensions E310 P A T AC-A AF-A Modular plug Size AF-A B 210 310 410 AR-A AL-A AW-A Unit: mm Part no.
Series E210/310/410 Spacer D C Center of F.R.L. body RELEASE B 1 X-X X 2 Y200 Y400 X Seal Model Y200 Y300 Y400 A 3 4 5 B 35.5 47 57 C 18.5 26 31 D 48 59 65 Applicable model E210 E310 E410 A (Spacer width) Replacement parts Description Material Seal HNBR Part no. Y300 Y300P-060S Y200 Y200P-061S Y400 Y400P-060S Spacer with Bracket Y400T B RELEASE G EE (Y100T, Y200T only) E Y200T 2 Center of F.R.L.
E210/310/410 Specific Product Precautions Series Be sure to read before handling. Refer to front matter 43 for Safety Instructions. Mounting Caution Warning The seal surface of the product to be attached requires the modular adapter O-ring seal surface as shown in Table 1. In addition, when tightening the modular adapter please refer to table 2 for the proper tightening torque. Table 1: Required O-ring seal diameter for the mating product ød Part no. Port size Over 14.
