PRODUCT NAME Wireless module MODEL / Series / Product Number P5740-133 No.
Contents Introduction 7 Specification 7 Pin description 8 Dimensions 9 -1No.
Safety Instructions These safety instructions are intended to prevent hazardous situations and/or equipment damage. These instructions indicate the level of potential hazard with the labels of "Caution", "Warning" or "Danger". They are all important notes for safety and must be followed in addition to International Standards (ISO/IEC)*1), and other safety regulations. *1) ISO 4414: Pneumatic fluid power -- General rules relating to systems.
Safety Instructions Caution 1.The product is provided for use in manufacturing industries. The product herein described is basically provided for peaceful use in manufacturing industries. If considering using the product in other industries, consult SMC beforehand and exchange specifications or a contract if necessary. If anything is unclear, contact your nearest sales branch.
Operator This operation manual is intended for those who have knowledge of machinery using pneumatic equipment, and have sufficient knowledge of assembly, operation and maintenance of such equipment. Only those persons are allowed to perform assembly, operation and maintenance. Read and understand this operation manual carefully before assembling, operating or providing maintenance to the product.
Caution ■When handling the unit or assembling/replacing units: •Do not touch the sharp metal parts of the connector or plug for connecting units. •Take care not to hit your hand when disassembling the unit. The connecting portions of the unit are firmly joined with seals. •When joining units, take care not to get fingers caught between units. An injury can result. ■After maintenance is complete, perform appropriate functional inspections. Stop operation if the equipment does not function properly.
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
Introduction P5740-133 is a wireless module which provides a SPI interface for MCU communication.It comes with the SMC original protocol using 2.4GHz ISM band. The frequency hopping period and the data rate can be switched between 2ms(1000kbps) / 5ms(250kbps). Moreover, the frequency channel numbers can be selected from 5 to 79. Specification Wireless module model No.
Pin Description Pin No. Name Description 1 3.3V_C VCC +3.3V DC 2 N.C. No Connection 3 3.3V_C VCC +3.3V DC 4 N.C. No Connection 5 NIRQ I2C interrupt : Output 6 PB11 Digital I/O 7 PB12 Digital I/O 8 PB13 Digital I/O 9 PC11 Digital I/O 10 PF4 Digital I/O 11 PF7 Digital I/O 12 N.C. No Connection 13 STM32F_RQ Request from MCU : Input 14 I2C0_SDA I2C Data : Input/Output 15 EFR_RQ Request to MCU : Output 16 I2C0_SCL I2C Clock : Output 17 N.C.
Dimensions •P5740-133 -9No.
Revision history A : Contents revised. 4-14-1, Sotokanda, Chiyoda-ku, Tokyo 101-0021 JAPAN Tel: + 81 3 5207 8249 Fax: +81 3 5298 5362 URL http://www.smcworld.com Note: Specifications are subject to change without prior notice and any obligation on the part of the manufacturer. © 2019 SMC Corporation All Rights Reserved - 10 No.
FCC information FCC notice "Declaration of Conformity Information" This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
IC Statement This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.