User's Manual

ManualsBrandsSMC Networks ManualsElectronicsZigbee RF Module

2010 SMC Networks

Page 1

I/M SMCSM01-Z rev. 1.0

8/19/10

Unpacking

Your SMCSM01-Z package includes the following items:

 One SMCSM01-Z Smoke Sensor

 One dust cover

 Two CR123A batteries

 Mounting bracket

 This user manual

If any items are missing or damaged, contact your place of

purchase. Keep the carton, including the original packing

material, in case you need to store or return the product.

Specifications

The SMCSM01-Z specifications are:

 Voltage: 3VDC

 Battery type1 3V Lithium, Duracell

123, Sanyo

, and

Panasonic

CR123A

 Sensitivity 2.25 % ± 1.35 %

 Drift compensation adjustment 0.5%/ft. max

 Operating temperature: 40° to 100° F (4.4° and 37.8° C)

 Compatible control panel: RB5701-Z SMA Gateway

The SMCSM01-Z specifications heat alarm specifications are:

 Rate-of-rise: 15°F/min >105°F (8.3°C/min > 40.6°C)

 Fixed: 135°F ± 5°F (57.2°C ± 2.8°C)

Note: Constant exposures to high or low temperatures or

high humidity may reduce battery life.

NFPA Guidelines

 NFPA 72, 2-1.4.2.1 Total (Complete) Coverage

If required, total coverage shall include all rooms, halls,

storage areas, basements, attics, lofts, spaces above

suspended ceilings, and other subdivisions and accessible

spaces; and the inside of all closets, elevator shafts, enclosed

stairways, dumbwaiter shafts, and chutes. Inaccessible areas

shall not be required to be protected by detectors. (For

exceptions, refer to NFPA 72.)

 NFPA 72, 2-1.4.2.2 Partial Coverage

If required, partial detection systems shall be provided in all

common areas and work spaces, such as corridors, lobbies,

storage rooms, equipment rooms, and other tenantless spaces

in those environments suitable for proper detector operation in

accordance with this code.

 NFPA 72, 2-1.4.2.3 Selective Coverage

Where codes, standards, laws, or authorities having

jurisdiction require the protection of selected areas only, the

specified areas shall be protected in accordance with this

code.

 NFPA 72, 2-1.4.2.4 Supplementary (Non required)

Coverage

Where installed, detection that is not required by an

applicable law, code, or standard, whether total (complete),

partial, or selective coverage, shall conform to the

requirements of this code. (For exceptions, refer to NFPA 72

Chapter 2 Spacing Requirements.)

 NFPA 72, 2-1.4.3

Where non required detection devices are installed for a

specific hazard, additional non required detection devices shall

not be required to be installed throughout an entire room or

building.

 NFPA 72, 2-2 Heat-Sensing Fire Detectors

Heat-sensing fire detectors shall be installed in all areas where

required by the NFPA codes and standards or by the authority

having jurisdiction.

 NFPA 72, 8-1.4.1.3.2 Detection in New Apartment

Buildings

Approved, single-station smoke alarms shall be installed in

accordance with 7-6.2.10 of NFPA 101 outside every sleeping

area in the immediate vicinity of the bedrooms and on all

levels of the dwelling unit including basements. (101: 18-

3.4.4.2) (For exceptions, refer to this section of NFPA 72.)

 NFPA 72, 8-1.4.1.4.2 Detection in Existing Apartment

Buildings Approved, single-station smoke alarms shall be

in-stalled in accordance with 7-6.2.10 of NFPA 101

outside every sleeping area in the immediate vicinity of

the bedrooms and on all levels of the dwelling unit

including basements. (101: 19-3.4.4.1) (For exceptions,

refer to this section of NFPA 72.)

Technical Bulletin

SMCSM01-Z is a member of SMC Networks’ family of reliable,

high-quality products using the latest technology available.

Please review the information in this section to ensure you

get the most out of your new SMCSM01-Z Smoke Sensor.

Pre-installation Considerations

Install the SMCSM01-Z in accordance with the National Fire

Protection Association’s (NFPA) Standard 72, Chapters 2 and

8. Depending on the application, you may need to reference

other chapters of NFPA 72 or NFPA 101.

SMC

oke

Sensor

User Manual

Congratulations on purchasing your

SMC

Smoke

Sensor

The SMCSM01-Z Smoke Sensor is a

low-profile wireless smoke detector designed to provide reliable smoke or fire detection. The SMCSM01-Z is ideal for difficult-to-wire

residential or commercial applications. This user manual has all the information to get your SMCSM01-Z Smoke Sensor up and running quickly.

continued on next page

Summary of content (7 pages)

PAGE 1
SMCSM01-Z Smoke Sensor User Manual Congratulations on purchasing your SMCSM01-Z Smoke Sensor. The SMCSM01-Z Smoke Sensor is a low-profile wireless smoke detector designed to provide reliable smoke or fire detection. The SMCSM01-Z is ideal for difficult-to-wire residential or commercial applications. This user manual has all the information to get your SMCSM01-Z Smoke Sensor up and running quickly.
PAGE 2
PAGE 3
SMCSM01-Z Smoke Sensor Quick Start Guide Placing the SMCSM01-Z If mounting to suspended ceiling tile, secure the tile with the appropriate fastener to prevent tile removal. B. Observing proper polarity, insert two 3V lithium Locations to Avoid C. Remove the red plastic dust cover from the SMCSM01-Z.
PAGE 4
PAGE 5
SMCSM01-Z Smoke Sensor Quick Start Guide Understanding the LED The LED on the SMCSM01-Z shows the following status: Flash = normal operation ON = smoke detected, sending an alarm OFF = trouble or maintenance is required Flashes Meaning Steps to Take 1 Unserviceable hardware fault Reset the SMCMS01-Z and rerun sensitivity test. If error persists, replace the sensor. 2–3 SMCMS01-Z is becoming insensitive Clean the SMCMS01-Z, reset it, and rerun the sensitivity test.
PAGE 6
PAGE 7
SMCSM01-Z Smoke Sensor Quick Start Guide Replacing Batteries G. Line up the new smoke chamber with the optical base by aligning the arrows on the smoke chamber to the latches on the optical base and snap down into place. H. Replace the detector cap by lining up the cap with the SMCSM01-Z. Then insert the cap into the SMCSM01-Z and turn clockwise approximately 15 degrees. The cap snaps firmly into place when secure. I.