User's Manual

ManualsBrandsSMC Networks ManualsElectronicsZigbee RF Module

2010 SMC Networks

Page 1

I/M SMCMT01-Z rev. 1.0

8/25/10

Verify Package Contents

SMC Networks provides the following items in your package:

 1 SMCMT01-Z Motion Sensor with wireless radio installed

 3 CR123A 3.0V lithium batteries

 2 plastic masks

 1 screw to secure the SMCMT01-Z to the wall-mounting

bracket

 1 wall-mounting bracket

 1 sheet of adhesive masking labels

 1 cardboard undercrawl window mask

 This Quick Start Guide

If an item is missing or damaged, contact your place of

purchase. The SMCT01-Z specifications are:

 Power supply: 2.6 Volt to 3.6 Volt

 Battery type: 3V Lithium, Duracell® 123, Sanyo® and

Panasonic®

CR123A

 Life Expectancy: 3 years using 3 batteries

 Current consumption walktest mode (LED flashing): 6 mA

 Transceiver: ZigBee IEEE 802.15

 Detection range: Up to 50 feet (15.2 m)

 Mounting height: 6 to 10 feet (1.8 to 3 m)

 Number of curtains: 9

 Relative humidity: 10 to 85% non-condensing

 Enclosure material: flame retardant ABS

Set the Switches

The SMCMT01-Z Motion Sensor circuit board has 2 switches to

configure range and mode. To access the switches, use a flat

head screwdriver to press the back cover tabs to release the

back cover. Looking at the rear of the device, the switches

are to the right of the bottom battery holder.

Install Batteries

With the rear panel of the SMCMT01-Z removed, install three

3V Lithium batteries.

Remove the back cover, if installed.

Remove any old batteries and dispose of them properly.

Place the 3.0V lithium batteries in the holder and press

each one into place.

Leave the back cover off and go to the next section.

Switch Description

ON (down) = Detection range is 50 feet (15.2 m). RANGE

OFF (up) = Detection range is 33 feet (10.1 m). This is the

default.

ON (down) = Bi-curtain Mode. Increases false alarm

immunity in small areas. Intruders must pass through 2

curtains to trigger an alarm. Do not use for ranges under

5 feet (1.5 m). This is the default.

MODE

OFF (up) = Standard Mode. Use for wide-angle or single-

curtain applications. Intruders to only pass through 1

curtain to trigger an alarm.

Congratulations on purchasing your

SMCMT01

Z Motion Sensor

The SMCT01-Z Motion Sensor is a 35' passive infrared motion sensor with 80-pound pet immunity or a 50' standard sensor. It is highly sensitive to moving infrared sources

and features superior immunity to RFI, vibration, static electricity, temperature changes, and other false alarm sources. This Quick Start Guide has all the information to

get your SMCMT01-Z Motion Sensor up and running quickly. For detailed installation information, please see the SMCMT01-Z Motion Sensor User Manual.

SMCMT01

Z Motion Sensor Quick Start Guide

continued on next page

Summary of content (4 pages)

PAGE 1
SMCMT01-Z Motion Sensor Quick Start Guide Congratulations on purchasing your SMCMT01-Z Motion Sensor. The SMCT01-Z Motion Sensor is a 35' passive infrared motion sensor with 80-pound pet immunity or a 50' standard sensor. It is highly sensitive to moving infrared sources and features superior immunity to RFI, vibration, static electricity, temperature changes, and other false alarm sources. This Quick Start Guide has all the information to get your SMCMT01-Z Motion Sensor up and running quickly.
PAGE 2
SMCMT01-Z Motion Sensor Quick Start Guide 4 6 Select a Coverage Pattern A. If the SMCMT01-Z is closed, use a flat head screwdriver to press the back cover tabs to release the back cover. B. If necessary, modify the coverage pattern as follows: A. Mount the SMCMT01-Z from 7 to 10 feet (2.1 to 3.0 m) Plastic mask method: Use one or both supplied plastic masks to mask off large areas of coverage. high. For optimum detection and pet immunity, mount it between 7 and 8 feet (2.1 and 2.4 m) high.
PAGE 3
SMCMT01-Z Motion Sensor Quick Start Guide C. Insert a small flat-head screwdriver between the tabs at B. Confirm that the undercrawl mask is in place to reduce the bottom of the SMCMT01-Z and turn the screwdriver to push the tabs apart. ceiling exposure. Coverage distance is 25 feet in Bicurtain Mode. Pets can roam freely below the SMCMT01Z mounting height, without triggering alarms. D. Select the appropriate knockout mounting holes on the mounting bracket for corner or flat-wall mounting. C.
PAGE 4
SMCMT01-Z Motion Sensor Quick Start Guide Compliances Limitations of Security Products FCC Notice This device has been designed, constructed, and tested with for compliance with FCC Rules that regulate intentional and unintentional radiators.