SMAXTEC pH PLUS BOLUS SX.
CONTENT 1x www.smaXtec.
EN ACTIVATION 1. 2. Please ensure that your smaXtec Base Station is activated and ready for use before starting the bolus initialisation process. Wirnet TM iStation Pour the buffer solution pH 7.00 into a narrow container (please note minimum filling level) and remove the sponge from the sensor tip.
ACTIVATION 3. Place the smaXtec pH Plus Bolus into the container sensor head first and gently shake it. www.smaXtec.
EN ACTIVATION 4. Switch on the bolus with the magnet provided 2 1 Do not move the bolus during calibration The magnet used to switch on the bolus is delivered with the smaXtec Base Station.
ACTIVATION 3 No blinking pattern Ensure that you are within the read-out range of the Base Station and repeat the process once or twice. smaXtec support www.smaXtec.
EN ACTIVATION 5. Assign bolus to an animal MESSENGER ORGANISATION + DASHBOARD MESSAGES ANIMALS + GROUPS + BOLUSES & DEVICES ADD BOLUS X - DEVICES ! The activation process is only completed when the bolus is assigned to an animal. This step is mandatory: Data will only be generated and displayed for assigned boluses.
ADMINISTRATION ! Administer pH Plus Boluses within the next 4 hours using the smaXtec bolus applicator. Keep the bolus in the buffer solution until it is administered. www.smaXtec.
EN SYNCHRONISATION Wirnet TM iStation messenger.smaXtec.
© 2021 smaXtec animal care GmbH. All rights reserved. smaXtec® is a trademark of smaXtec animal care GmbH. This trademark may not be used without permission of smaXtec animal care GmbH. This user manual may not be copied. Changes regarding this document will not be announced. Before using the smaXtec products, please check if there is a new version of this document available on the website: http://www.smaxtec.
SMAXTEC SUPPORT You have questions or need assistance? We are happy to help! Support International T +43 316 46 15 88 - 80 Belgiergasse 3 · 8020 Graz · Austria E support@smaXtec.