SMAWAVE Solutions Inc. MGM5607A Module Product Specification MGM5607A Module March 8, 2019 SMAWAVE is a trademark of SMAWAVE Solutions, registered in the United States and other countries. Other product and brand names may be trademarks or registered trademarks of their respective owners. This technical data may be subject to U.S. and international export, re-export, or transfer (“export”) laws. Diversion contrary to U.S. and international law is strictly prohibited.
1 Product Overview The MGM5607A module is an industrial-grade LTE module, which provides multiple bands supports and covers most of LTE bands in Europe and Latin America. This module can be adapted to various types of terminal devices, providing LTE network connection and data communication, such as industrial routers, industrial handsets, tablet computers, laptops, etc. The MGM5607Amodule achieves download rates up to 150Mbps and uplink rates to 50Mbps (FDD). The MGM5607Amodule passed CE certifications.
2 General Features Parameter Main Chipset Value GCT GDM7243QT Dual ARM1136JFS processer 400MHz Memory 2Gb Nand Flash + 1Gb LPDDR2 Band support Band 40/41/42/43/48/53 Antenna 2 UFL ports LTE: Main and auxiliary antenna Tx / Rx 1Tx / 2Rx MIMO DL: 4x2 MIMO or 2x2 MIMO UL: 1x2 MU-MIMO or 2x2 MIMO CA（UL/DL） 40+42/40+43/40+48/41+42/41+43/41+48/ 53+42/53+43/53+48/42+40/42+41/42+53/ 43+40/43+41/43+53/48+40/48+41/48+53 Modulation Uplink: QPSK / 16QAM Downlink: QPSK / 16QAM / 64QAM Power output +2
3 Pin Definitions Pin Description Pin Description LTE_WAKE# UART0_TXD UART0_RXD FACT_RST GND RGMII_TXD3 RGMII_TXD1 GND Pin No. 1 3 5 7 9 11 13 15 VCC_Main GND GPIO6 USIM_PWR USIM_DATA USIM_CLK USIM_RESET GPIO7 Pin No.
Pin Pin Name Description No. I/O Voltage Domain Power 2, VCC_Main 24,39, VCC source PI 41, 52 4, 9, 15, 18, 21, Return current path 26, 27, GND 29, 34, 35, 37, 40, 43, 50 Universal Serial Bus ( USB) USB_D+ 38 USB_D- 36 USB serial data interface compliant to the USB 2.
RGMII_RXCLK 31 I RGMII_RX_DV 45 I Auxiliary Signals 22 PERST# I, 1.8V Pull-up 7 FACT_RST PHY_RESET# Functional reset to the card FACT reset signal O 1.8V Pull-up 49 PHY reset signal 1 Open Drain active Low signal. O This signal is used to request that LTE_WAKE# the system return from a O sleep/suspended state to service a function initiated wake event. Communications Specific Signals 20 Active low signal.
UIM clock signal. USIM_CLK 12 Compliant to the ISO/IEC 7816-3 O 1.8V/3V specification ( CLK). UIM data signal. USIM_DATA 10 Compliant to the ISO/IEC 7816-3 I/O 1.8V/3V specification ( I/O). 4 5 DC Electrical Parameter Description Min Max Unit VIH High-level input voltage 1.17 VDD_IO V VIL Low-level input voltage -0.3 0.63 V VOH high-level output voltage 1.6 VDD_IO V VOL low-level output voltage 0 0.
7 Module Dimensions SMAWAVE Confidential
FCC Certification Requirements. According to the definition of mobile and fixed device is described in Part 2.1091(b), this device is a mobile device. And the following conditions must be met: 1. This Modular Approval is limited to OEM installation for mobile and fixed applications only.
caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. In cases where the manual is provided only in a form other than paper, such as on a computer disk or over the Internet, the information required by this section may be included in the manual in that alternative form, provided the user can reasonably be expected to have the capability to access information in that form.
