Welcome to your Camera
Contents Introduction to Your Camera............................... 2 Features.........................................................................2 Components................................................................. 4 Installing the Product.......................................... 7 Launching the App ............................................. 10 Mounting on the Wall......................................... 13 Specifications......................................................
Introduction to Your Camera This SmartThings Cam can monitor your home and then alert any suspected motions in real time. Features •• Standalone system: Equipped with CPU and video encoder for operation, which requires only power and network connections. •• HD video: Supports up to 1080p HD video with H.264 encoding. •• Trusted Platform Module (TPM): Its dedicated chip safely shields cryptographic keys used for authentication to ensure safe communication between network components and encrypted video data.
Introduction to Your Camera •• 2 IR LEDs: Can provide illumination up to 5 meters away for better video quality. •• High dynamic range (HDR): Balances the illumination for clear image quality. •• Motion detection zone: Can be changed by dragging or tapping areas for motion monitoring. •• Recording time: Can be specified to let the camera record video upon motion detection.
Introduction to Your Camera Components Front panel Status LED IR LEDs IR LEDs Microphones Microphones Lens Light Sensor Component Description Status LED Off: No power supplied Blue On: Power supplied Slow blinking of Blue: Booting in progress Fast blinking of Blue: Rebooted with default settings 4
Introduction to Your Camera Component Description Status LED Green On: Wireless network connected Fast blinking of Green: Data communication in progress Amber On: Firmware upgrade failed.
Introduction to Your Camera Rear panel Reset Button Power Plug Stand Mounting Plate Component Description Power Plug Connect the power adapter here. Never use other adapters Reset Button Press for over 10 seconds to restore the factory default settings. Then the system reboots with the default values. Stand Used to support the camera on a table or wall. Mounting Plate Used to install the camera on a wall after removing from the stand.
Installing the Product When the product is ready, install it by keeping the following procedure: 1 Check the following items are included in the package including this user guide. 2 Determine the location to install the product.
Installing the Product 3 Connect the power plug into the camera and then plug the power connector into the outlet to supply power. Never use power adapters other than the provided one. It may cause damage to the system. The status LED blinks (approx. 1 minute) in amber during startup. Then the LED color changes to blue before registration. After wireless connection is finished, its color changes to green.
Installing the Product 4 Download the SmartThings app for Android or iOS, create an account, and follow on-screen instructions to add the device. 5 Use the SmartThings app to scan the QR code at the bottom of the stand and then follow onscreen instructions to finish setup. The QR code is located under the mounting plate. When you cannot find the QR code, remove the mounting plate.
Launching the App When you launch the app after all things are made, the main screen appears on your mobile device. For monitoring, select the desired site on the screen. Then the following live view screen appears.
Launching the App No. Description 1 When clicked, the following menus appear: •• My Info: Moves to the subscription page. You can subscribe to the premium service at Samsung.com. •• Edit: Can edit the device information. •• Settings: Moves to the camera plug-in settings page. •• Information: Displays the app information. 2 Toggles between full live view screen and normal screen. 3 Displays the live view screen. 4 Enables/disables the microphone. 5 Mutes the video sound.
Launching the App The differentiated subscription plans are provided as follows: Basic Plan Premium Plan Free of charge $7.99 per month or $79.
Mounting on the Wall The camera is usually mounted on the wall for permanent installation. In this case, follow the steps below: 1 Remove the mounting plate from the stand by sliding it forward from the stand. 2 Hold the mounting plate at the desired location and mark the holes for two mounting holes. 3 Drill two pilot holes on the mounting surface at the marked location.
Mounting on the Wall 4 Align two mounting holes on the camera stand with two pilot holes and then mount the plate on the wall surface with two provided screws. 5 Slide the camera stand onto the mounting plate until it clicks in place. 6 Insert the power cable into the hole of the stand, connect the cable to the camera, and plug the power adapter into the outlet. 7 Adjust the camera for better performance and fix it firmly.
Specifications Power Adapter input: 100-240 V AC, 50/60 Hz Adapter output: 12 V DC, 1 A Color White Sensor ½. 7" CMOS sensor Dimensions (H x W x D) 3.98” x 1.82” x 1.72” (101 mm x 46.3 mm x 43.7 mm) Operating tempera 32 °F to 104 °F (0 °C to 40°C) Storage temperature -4 °F to 158 °F (-20 °C to 70 °C) Video Up to 1080p at 30 frames/sec, H.264 encoding Audio Bi-directional full-duplex audio, G.
Specifications Viewing angle 145° diagonal (Dewarping FOV is to be updated later) Night vision Built-in IR LEDs for night-time illumination (range within 5 m) IR LEDs 2 LED type 1 tri-color LED (power/network/status) Connectivity Wi-Fi 802.11b/g/n, 2.4 GHz/5 GHz (WPA & WPA2 encryption supported) Wireless interface IEEE 802.11ac, 802.
Works with SmartThings SmartThings works with a wide range of connected devices, including lights, cameras, locks, thermostats, sensors, and more. To purchase a device to connect to your product, be sure to check the Works with SmartThings label.
