Quick Start Guide

B Sensor Installation

1. Each SmartSense B Sensor is shipped in a package labeled with the name of the piece of equipment it belongs to

2. SmartSense B Sensors are shipped active and ready to communicate

4. Make note of each sensor’s serial number (for example, D0001234) and the names of the refrigerated units they’re

installed in

• This information will be used to name the sensors in the View Data and Manage Devices section

3. Using the included zip ties, secure the B Sensor inside your equipment

• Trim excess zip tie so the B Sensor looks similar to the photos below

B Sensor Quick Start Guide

Setting up your B Sensors

www.smartsense.co

A1/819

PAGE 1
B Sensor Quick Start Guide Setting up your B Sensors B Sensor Installation 1. Each SmartSense B Sensor is shipped in a package labeled with the name of the piece of equipment it belongs to 2. SmartSense B Sensors are shipped active and ready to communicate 3. Using the included zip ties, secure the B Sensor inside your equipment • 4.
PAGE 2
B Gateway Installation 1. The SmartSense B Gateway is a hub that receives temperature and time data from the B Sensors 2. Data is synced to the host over your Wi-Fi or a cellular connection 3. Additional supplies needed: • 12 V power supply • Velcro fasteners • 4.
PAGE 3
• Here you will see if the gateway connected successfully • When installing the B Gateway, choose placement that is central to all of your sensors and make sure it has a line of sight path to the sensors −− The following is a typical kitchen layout that demonstrates how to install your sensors and gateway −− Use the mounting holes on the B Gateway or the provided Velcro fasteners to install the device View Data and Manage Devices 1.
PAGE 4
SmartSense B Sensor: Regulatory Information RF Exposure Statement In order to comply with RF exposure limits established in the ANSI C95.1 standards, the distance between the antenna or antennas and the user should not be less than 20 cm. FCC Certifications and Regulatory Information (USA only) FCC Part 15 Class B This device complies with part 15 of the FCC Rules.