Instruction Manual Time & Temperature Projection Alarm Clock Model:SC91 Weather Forecast Time &Temp Projection Time Color Digital Display Snooze °C/°F Selectable Indoor & Outdoor Indoor & Outdoor Temperature Humidity Dual Alarm Adjustable Backlit & Projection
Content 1. Preface........................................................................................ 1 2. Attention...................................................................................... 1 3. Package Content......................................................................... 2 4. Product Specification................................................................... 2 5. Function Introduction................................................................... 5 6. Getting Start....
technician. 1. Preface ● Thanks for choosing this device from SMARTRO. places (radiator, electric heater, stove, etc.). ● Before You Start Using It ● Do not place the product in direct sunlight and high temperature Keep the product away from strong electromagnetic waves, strong static electricity, or moisture and condensation. Make sure to read the instruction manual carefully.
French, Spanish, Dutch and Danish F.Y.I.: ● ● Adjustable brightness of backlit and projection The wireless remote sensor can work at -40°C to +70°C. Please Humidity: Indoor & Outdoor measurable range: 19%RH ~ choose the right battery according to the limit temperature of the 96%RH wireless sensor: ● Temperature: Alkaline zinc manganese battery can work at -20°C to +60°C. — Indoor temperature measurement ranges: 15°F (-9.9°C) to Polymer lithium ion rechargeable battery can work at -40°C to +70°C.
. Function Introduction Part B – Back Button and Power B1: "SET" button B2: "ALARM" button Part A-Positive LCD B3: " " button B4: "SNOOZE/LIGHT" button A1: Time B5: " A2: Calendar B6: " A3: Week " button " button A4: Weather Forecasting B7: " " button B8: Projector A5: Outdoor Temperature B9: Temperature sensor A6: Outdoor Humidity B10: Alarm1 on/off switch A7: Indoor Humidity B11: Alarm2 on/off switch A8: Indoor Temperature B12: Projection on/off switch B13: Battery compartment B14: Powe
. Getting Start ● Plug in the power adapter to the clock. ● When the clock is successfully connected to the power supply, all the symbols on the LCD display will light up. You will hear a "di di di" sound. The projection clock starts to detect indoor temperature and humidity. ● At the same time, unscrew the battery cover according to the OPEN direction note, take out the battery insulation sheet. Screw Part C –Wireless Remote Sensor the battery cover back.
. Manual Setting ● Press and hold the " SET " button for more than 3 seconds, 12Hr/24Hr display starts to flash. Use the " " and " " buttons to set the time format to 24Hr mode or 12Hr mode. ● Press " SET " to confirm your setting, the Hour display starts to flash. Use " ● to flash. Use" ● " and " " buttons to set the correct hour. Press " SET " to confirm your setting, the Minute displays starts " and " " buttons to set the correct minute.
● When the switch of alarm 1 or alarm 2 is moved to the " OFF " position, the symbol of " " or " " disappears. The alarm ● Press " ALARM " button to confirm your setting, the repeat icon " M-F " of the Alarm 2 starts to flash. Use the " " and " " buttons to set the alarm repeat in " M-F " , " S-S " or " M-F " and " S-S ". function will be deactivated. ● Press " ALARM " button to confirm your setting, the snooze time of the Alarm 2 starts to flash. Use the " 8.
8.3 Turn off the Alarm Tone ● Alarm tone will automatically turn off after 2 minutes or you can press any button except " SNOOZE/LIGHT " to turn off the alarm tone. The alarm will repeat automatically at the same time of the next day. Snooze function by pressing " SNOOZE/LIGHT " when the alarm is " or " " starts to flash, then alarm will ring again after the Snooze time. Under the Snooze function activated status.
11. Wireless Remote Sensor Pairing & Manual Setting station failed to receive signals from wireless remote sensor, please 11.1 Wireless Remote Sensor Pairing manually. The outdoor temperature will show an animation of the Step 1: RF antenna symbol, the weather station will try to receive signals — Connect the weather station with power supply. from the wireless remote sensor again. — Insert 2 x AA batteries to each wireless remote sensor.
12. Temperature ● 12.1 Display and Trend of Temperature/Humidity ● ● The current indoor temperature/humidity and the temperature/ humidity trend (indoor) are shown on the LCD display. ● Twice to display the minimum temperature values of indoor and outdoor sensor. After connected with the outdoor sensor successfully, the outdoor temperature/humidity and the temperature/humidity trend Three times to display the dew point temperature values of outdoor sensor.
13. Weather Forecast 14. Low Battery 13.1 Weather Forecast Statement ● If the " INDOOR " column displays battery icon " ● to replace the weather station's battery as soon as possible. The weather station calculates weather forecast for the next 12 ", you need hours based on the barometric pressure trend.
Projection image upside down. " button to Short press " adjust the angle by 180°. Backlit is too bright or too dark. Press " SET " button to adjust 4 backlit brightness, light - medium - low - out. 16. After-sales Support Please contact us if your device fails to work despite these measures or your experience with us is less than perfect in anyway. Or Join our Instagram or Facebook group for more support and discount information. The batteries are Replace new batteries for depleted. outdoor sensor.
17. Waste Disposal ● This product has been manufactured using high-grade materials and components which can be recycled and reused. ● As a consumer, you are legally required to take them to your retail store or to an appropriate collection site depending on national or local regulations in order to protect the environment. ● The symbols for the heavy metals contained are: Cd=cadmium, Hg=mercury, Pb=lead. ● Please do not dispose of this instrument in household waste.