SMARTENTRY Encoder Reader Using Instruction
SMARTENTRY Encoder Reader Using Instruction Contents: 1 INSTALL APP..................................................................................................................................................................3 1.1 IPHONE........................................................................................................................................................................ 3 1.2 ANDROID........................................................................................
SMARTENTRY Encoder Reader Using Instruction 1 INSTALL APP 1.1 iPhone 1) Open the App Store on your phone. 2) Click on the search bar above. 3 3) Search and install EvoKey.
SMARTENTRY Encoder Reader Using Instruction 1.2 Android 1) Open the Google Play Store on your phone. 2) Click on the search bar above. 4 3) Search and install EvoKey.
SMARTENTRY Encoder Reader Using Instruction 2 REGISTER 1) Open the EvoKey on your phone, click "Register". 4) Account successful. registration 2) After entering the name, email and password, click "Next". is 5 3) Enter the verification code.
SMARTENTRY Encoder Reader Using Instruction 3 INTRODUCTION OF ENCODER READER 1) Encoder reader supports E-Cylinder, E-Handle and E-Latch。 2) Encoder reader can only be used after it is bound with lock, and cannot be used alone. 3) An encoder reader can bind multiple locks within the valid range. 4) Only when the encoder reader is online can the permission in lock be updated and the events in lock be reported. 4 INSTALL ENCODER READER 1) After entering the account and password, click "Login".
SMARTENTRY Encoder Reader Using Instruction 4) After entering the name, click "Next". 7) Select the locks to bind. 5) Set the network mode. 8) Wait for the encoder reader to be installed. 7 6) Wait to connect to the encoder reader. 9) Enter the address and click "Next".
SMARTENTRY Encoder Reader Using Instruction 10) Take a picture and click "Next". 11) Encoder completed. reader installation 5 USE ENCODER READER 1) When the encoder reader is online, it automatically updates the permission of the lock bound to it in real time, and reports the events in lock to the background.
SMARTENTRY Encoder Reader Using Instruction 6 DELETE ENCODER READER 1) Click the set icon in the upper right corner of the interface to enter the device menu interface. 2) Click "Delete Device". 3) Enter the password and click "Submit". 7 ONLINE STATUS OF ENCODER READER No. Online status Status 1 Online The encoder reader has no prompt light. When it is online, it can update the permissions in the locks and report the events in the locks to the background.
SMARTENTRY Encoder Reader Using Instruction Red and green lights (equivalent 4 5 6 to yellow) flash once every 2 seconds Red, blue, and green lights (equivalent to white) flash once every 2 seconds Nothing Nothing Nothing After the buzzer rings 3 times, release the button to restore the The device is connected to the network but not to the server The device is connected to the network, not to the server, and Bluetooth is connected by the mobile phone Press and hold the reset button factory settin