Smartmi Air Circulator Fan Instruction Manual 01 Manuel d'Utilisation Smartmi Ventilateur de circulation d'air 12
READ AND SAVE THESE INSTRUCTIONS WARNING Improper product use may lead to electrical shocks, accidental fire, personal injuries, and other damages. Please do not operate the product on an uneven or unsteady surface where it may topple over. Please do not operate the product near other objects which may topple over. Please do not operate the product in a hot and humid environment, such as a bathroom. Please discontinue your use of the product if the adapter cord is damaged or the adapter plug is loose.
Please keep your hair or fabrics away from the fan to prevent objects from becoming entangled in the fan blades. Please do not use the supplied adapter with any other product. This appliance contains batteries that are only replaceable by skilled persons. The remote controller is powered by 1 LRAAA battery, insert 1 LRAAA battery with the correct polarity in the battery compartment. The supply terminals are not to be short-circuited. Non-rechargeable battery used for remote contoller is not to be recharged.
Safety instructions Precautions Handling In use If you encounter any of the following: abnormal sound, strange Always turn the fan off and unplug it before moving it. odor, high temperature, inconsistent fan rotation, etc., stop the fan Hold the fan column firmly to prevent falling and personal injuries. immediately. Do not lean on the fan or tilt the fan while it is running. Installation Do not dismantle the device by yourself.
Package list 4 5 6 Fan blade knob Fan cover knob Allen wrench 2 Fan assembly 7 8 9 Base bolt Screw for fan cover Power Adapter 1 3 10 Column Base Remote control 4
Product overview On/Off button Temperature-sensing mode / Set Level button Horizontal Oscillation button Vertical button Display Column Home position Home position for fan oscillation. If the fan is turned off while oscillation is on, the wind speed will be reduced and the fan cover will slowly rotate back to home position. If the fan's power supply is cut off, the fan cover will not return to home position and will remain in it's current position at the time.
Installation Dismantling the fan assembly Installing the rear fan cover Take out the fan assembly. Rotate the fan grille counterclockwise until it is loose, as shown in Fig. 1 below. Remove the fan grille as per the directions in Fig. 2 and remove fan blades. Place the rear fan cover on the motor aligned at the top position. Tighten 5 fan cover knob clockwise to attach the rear fan cover to motor.