Minibar Systems SmartFridge 65 Solid Door – Electronics on Door SmartFridge 65 Solid Door - Electronics on Door User’s Guide DOC0118_SmartFridge 65 Solid Door - Electronics on Door_Rev-5.
Minibar Systems SmartFridge 65 Solid Door – Electronics on Door Table of Contents 1. 2. Description of the SmartFridge APM .............................................................................................................................. 3 1.1 Adjustable Wire Shelves ............................................................................................................................................ 3 1.2 Defrost Water Outlet ..........................................................
Minibar Systems SmartFridge 65 Solid Door – Electronics on Door 1. Description of the SmartFridge APM 1.1 Adjustable Wire Shelves Shelves can be placed on the guides inside the SmartFridge as required. Perishable foods should be stored towards the back/rear of the shelves as this is the coldest location in the SmartFridge. 1.2 Defrost Water Outlet The interior of the SmartFridge is cooled with a cooling plate mounted in the rear wall. Under the plate there is a channel and an outlet for defrosting water.
Minibar Systems SmartFridge 65 Solid Door – Electronics on Door 2. Location and Ventilation Requirements The SmartFridge User’s Guide details the criteria necessary for the installation of the SmartFridge. These details are essential for the efficient running of the SmartFridge’s electronics and refrigeration systems ensuring its long life span and trouble free operation. 2.1 Choosing the Right Location Place the SmartFridge in a dry and regularly ventilated room.
Minibar Systems SmartFridge 65 Solid Door – Electronics on Door 5. Use of the LED Control Panel 5.1 Display The front panel consists of two LEDs (Green and Red), and a three character, seven-segment, LED display. The LEDs signify different operating conditions detailed below. The display shows the current temperature in the first two characters with the last character showing either “F” or “C” for Fahrenheit and Celsius. The left decimal point indicates the compressor is OFF.
Minibar Systems SmartFridge 65 Solid Door – Electronics on Door QUICK COOL – The SmartFridge will chill until the temperature reaches 34°F/1°C. You can enter this mode by pressing the QUICK COOL button from ON or SNOOZE modes. The green LED will flash until QUICK COOL is complete. Upon completion, the SmartFridge will return to the ON mode. The default temperature is 34°F/1°C ± 1°C.
Minibar Systems SmartFridge 65 Solid Door – Electronics on Door 6. Maintenance and Cleaning Disconnect the SmartFridge from the power supply before cleaning or attempting repairs. 6.1 Cleaning the SmartFridge Disconnect the power plug from outlet before cleaning the SmartFridge. Remove the contents. Use neutral cleaning agents to avoid damage to the SmartFridge liner and exterior surface. Clean the exterior with water and a neutral detergent.
Minibar Systems SmartFridge 65 Solid Door – Electronics on Door 7. Miscellaneous Information 7.1 Instructions for Use These instructions are intended for the user. They describe the SmartFridge and correct operating procedures for safe use. PLEASE SAVE THESE INSTRUCTIONS. 7.2 We Care for the Environment Our products use environmentally friendly packaging. Individual packaging materials are clearly marked. These instructions are printed either on recycled paper or chlorine free bleached paper. 7.
Minibar Systems SmartFridge 65 Solid Door – Electronics on Door 8. Troubleshooting Guide Please refer to this troubleshooting guide for the possible cause and solution to your problem. If you cannot resolve on your own, see “Minibar Systems Contact Information” at the end of this manual. The SmartFridge fails to operate after connecting to electrical power supply: Check the power cord is properly connected. Check the power supply in the electrical outlet (blown fuse / circuit breaker).
Minibar Systems SmartFridge 65 Solid Door – Electronics on Door Tips for energy savings: Do not open the door too often, especially in hot and humid weather. Close the door as soon as possible. Check SmartFridge ventilation on a regular basis to ensure adequate air circulation behind the SmartFridge (see “Choosing the Right Location” and “Ventilation Requirements” sections). Before loading the SmartFridge with warm foods, make sure that they are cooled to ambient temperature.
Minibar Systems SmartFridge 65 Solid Door – Electronics on Door 10. Proof of Purchase HELP US HELP YOU... Read this guide carefully. It is intended to help you operate and maintain your new Fridge properly. Keep it handy to answer your questions. If you don't understand something or you need more assistance, please call: Minibar Customer Service 301-309-1112 Keep proof of original purchase date with this guide to establish the warranty period. Write down the model and serial numbers.