SmartProfile Base Station Installation Guide Only Smartfield trained and certified installers are authorized to install and maintain equipment.
Copyright © 2010 SmartfieldTM, Inc. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means electronic or mechanical, for any purpose without the express written permission of SmartfieldTM, Inc. Information in this document is subject to change without prior notice. Certain names of program products and company names used in this document might be registered trademarks or trademarks owned by other entities. SMARTFIELD, INC.
Introduction Important Safety Precautions Congratulations, you have just purchased the SmartProfile Base Station, one of the most advanced irrigation management tools available. SmartProfile Base Station SmartProfile is a remote soil moisture sensing station, which provides information from the grower’s field to their home computer.
Installation The SmartProfile Base Station box weighs approximately 20 lbs. Please remember to lift with your legs. After opening the box, remove the SmartProfile Base Station and gently set aside. 1. Spade install from sensor and base station documents. 2. Driving post: a. Choose a convenient or user-preferred location for the SmartProfile system. Remember the system must be within a 1,000-foot range from the Base Station.
Installation 6. Connecting Watermark Probes (if equipped): a. Run the Watermark Probe cord through the opening in the bottom of the system and plug into the motherboard socket labeled “WM-1”. Note: If plugging in more than one Watermark Probe, make sure to skip the sockets labeled “TH” and use the sockets labeled “WM”. Additional Probes should be connected in an incremental fashion (WM-1, WM-2, WM-3, etc.
Smartfield One (1) Year Limited Warranty Smartfield’s warranty obligations for these hardware products are limited to the terms set forth below: Smartfield, Inc. (“Smartfield”) warrants SmartCrop®, SmartRate™, SmartRate™ PRO, SmartWeather™, PivotScout™, PivotScout™PRO, SmartProfile™, and other Smartfield-branded hardware products against defects in materials and workmanship under normal use for a period of ONE (1) YEAR from the date of retail purchase by the original end-user purchaser (“Warranty Period”).
OBTAINING WARRANTY SERVICE Please access and review the online help resources referred to in the documentation accompanying this hardware product before requesting warranty service. If the product is still not functioning properly after making use of these resources, please contact the Smartfield representatives using the information provided in the documentation.