User Manual-Smart Cylinder TUYA BLE VERSION APP Smart your life! Version 1.
1 Packing Accessories 3 Reader View Please check the packing box and accessories when you got the item in hand. a b c d e A-A Zoom in Type-C Port f Manual Key User Manual-Smart Cylinder TUYA BLE VERSION Smart Keycard AP P Smart Keycard Smart your life! Ver si on 1 .0 E di ti on S 1 Smart Lock Epoxy Card Manual Key Sucker Tool Manual 4 Dimension Product Specification 58 34 31.
5 INSTALLATION STEPS 5.1 Please use the screw driver to take off the screw on the back knob position, refer the below Pic.1: 5.2 Please insert the cylinder to the existed lock and fix the cylinder with the long screw as picture 2. e Pic.1 Pic.
5.3 Please use the screw driver to fasten the screw on the back knob position, refer the below picture 3: 5.4 Please take off the reader cover with the magnet or sucker (included in our accessories bag),assemble 1xCR123a alkaline battery, refer the below picture 4: Type-C Battery Box 2 1 Manual Keyhole Notice after you insert the key into the key hole and turn clockwise, you shall turn the reader to unlock the door but not to use the key to unlock the door directly. Pic.3 5 Pic.
.5 Please test with your fingerprint under the factory state, any fingerprint will unlock the door lock, refer the below picture 5: 5.6 Please test the lock with key card after you configure the lock with Tuya smart APP(Refer the Part 6). Sm ar tK ey car d Notice the keycard or fingerprint can only be enrolled by the Tuya smart APP, so it is important to install this app in your mobile before start daily use. Pic.
.Tuya APP Settings 6.2 Intelligent Configuration Please download the Tuyasmart or Smart life on Apple store or Google play. also you can scan the QR code below to download the APP directly. Please run the Tuya smart APP and click “Add Device” on the right top position for auto scan: 6.1 Please register one account with your E-mail or mobile number. Step 1 Add Device Step 2 Step 3 Activate the lock Click “Add” Done 6.
6.4 Add User Fingerprint Under Tuya smart APP setting, you can click the fingerprint management and add the fingerprint. 6.5 Add User Card Under Tuya smart APP setting, you can click the card Management and add the card. Step1: Click Add Card Step1: Click Add Fingerprint Step2: Select User Step2 Select User Step3: Tap Card on the lock induction area 6.
. Sales and Service Terms 6.8 Passage Mode Under Tuya smart APP setting, you can tick”automatic lock switch”, under this settingthe lock will be in always open state, you can press any valid fingerprint to cancelthis passage mode. 7. Reset the Lock Under Tuya smart APP setting, you can click the “Remove Device” to reset the lock and the lock will be set to factory state, you can use any fingerprint to unlock the lock.
. FCC warnings This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
