Quick Guide

Wireless camera
Quick Guide
Before operating this unit,please read these instructions
carefully,and save them for future use.
V1.2
1
Account login: On the login
interface, enter the account/
phone number/email, and the
corresponding password, and
click the "OK" button to log in.
Third-party login: APP supports
third-party login. Click the
third-party social software icon,
jump to the APP to complete
the authorization and log in.
Account login
3 4 52
1. Open the "EseeCloud"
APP and click the "+" icon
in the middle of the interface
to enter the scan QR code
interface;
2. Scan the QR code
on the device ;
1. Select "Remote View" to
add, connect the device to
WiFi, select the working
WiFi that the device needs
to connect to, enter the
password, and click Next;
2. Use the device to scan
the QR code of the mobile
phone according to the
operation shown in the
figure, and proceed to the
next step after hearing the
prompt tone or the device
indicator light no longer
flashes;
3. After the network configuration is successful,
the device name can be added successfully.
3. On the Add device
interface, click "Add";
4. Reset the device and
wait for the device
indicator to flash and
proceed to the next step;
风琴折，折后净尺寸70x130mm，120克双铜彩印
APP Download and Installation
Note: For iOS system, it requires iOS 9.0 version
or above.For Android,Android 5.1 or above.
Users can search “EseeCloud(IP Pro, VR Cam) ”
on APP store or Google Play,or scan the QR code
below to install the APP.
EseeCloud APP APP download
Software Installation
Camera adding
process description
Description
1. Photosensitive
Collect ambient luminosity value, turn
on the infrared light when the current
illuminance is less than 3 Lux.
2. Reset button The working state of the device, long
press 3-5 seconds to restore the
factory, the camera will have a voice
prompt broadcast.
3. SD card slot
TF card, storage video and playback
video.
4. DC power supply
Power input
5. Network port and
indicator light
Connect the Lan cable and check the
current device status indicator light
( flashes once /1 s on hotspot mode)
Remote View adding process
5. To view and use via
WiFi or other networks,
please select Remote
View;If there is no
network, if you connect
to the camera at close
range, please select
local Direct Connection;
Interface description
This manual is suitable for various types of cameras.
(The appearance may be different due to different batches. The
details are subject to the receipt.This manual is only for the
installation instructions of this series of equipment.)
1. Wireless Pan-tilt IP Camera
2. WiFi Spot Light Camera
3. WiFi MINI Dome Cmaera
DC power
supply (5V)
4
2
3
Reset button
SD card slot
2
Reset button
4
5
Network port and
indicator light
3
SD card slot
1
Photosensitive
DC power
supply (12V)
(* You can see it by unscrewing the screw.)
2
4
5
Reset button
DC power
supply (12V)
Network port and
indicator light
3
SD card slot
(* You can see it by unscrewing the screw.)