User's Guide

ManualsBrandsSmart ManualsElectronicsApplication Ready Platform 6720

Confidential and Proprietary – Inforce Computing Inc.

NO PUBLIC DISCLOSURE PERMITTED: Please report postings of this document on public servers

or web sites to: techsupport@inforcecomputing.com

Restricted Distribution: Not to be distributed to anyone who is not an employee of either

Inforce Computing or its subsidiaries without the express approval of Inforce Computing.

Not to be used, copied, reproduced, or modified in whole or in part, nor its contents revealed in

any manner to others without the express written permission of Inforce Computing, Inc.

Inforce Computing is a trademark of Inforce Computing Incorporated, registered in the United

States and other countries. All Inforce Computing Incorporated trademarks are used with

permission. Other product and brand names may be trademarks or registered trademarks of their

respective owners.

This technical data may be subject to U.S. and international export, re-export, or transfer (“export”)

laws. Diversion contrary to U.S. and international law is strictly prohibited.

Inforce Computing Inc.

48820 Kato Road, # 600B

Fremont, CA 94538

U.S.A.

Inforce 6720™

User Guide

003767 Rev A

May 13, 2021

Submit technical questions at:

http://www.inforcecomputing.com/techweb/

Summary of content (19 pages)

PAGE 1
Inforce 6720™ User Guide 003767 Rev A May 13, 2021 Submit technical questions at: http://www.inforcecomputing.com/techweb/ Confidential and Proprietary – Inforce Computing Inc. NO PUBLIC DISCLOSURE PERMITTED: Please report postings of this document on public servers or web sites to: techsupport@inforcecomputing.com Restricted Distribution: Not to be distributed to anyone who is not an employee of either Inforce Computing or its subsidiaries without the express approval of Inforce Computing.
PAGE 2
Inforce 6720™User Guide Revision History Revision History Revision Date Description Author A 13 May 2021 Initial Release GU Approval Record 003767 Rev A Function Name Date Reviewed By SS/DD 13 May 2021 Approved By PSD 13 May 2021 MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION Confidential and Proprietary – Inforce Computing, Inc.
PAGE 3
Inforce 6720™User Guide License Agreement License Agreement Your use of this document is subject to and governed by those terms and conditions in the Inforce Computing Purchase and Software License Agreement for the SDA845 based Inforce 6720, which you or the legal entity you represent, as the case may be, accepted and agreed to when purchasing a Inforce 6720 from Inforce Computing Inc. (“Agreement”).
PAGE 4
Inforce 6720™User Guide Preface Preface This User Guide familiarizes the end user with the specification, interfaces, setup, and usage of the Inforce 6720. Intended Audience This User Guide is intended for technically qualified personnel. It is not intended for general audiences. Document Organization The chapters in this document are arranged as follows: 1. Scope 2. Hardware Specifications 3. System Setup and Usage 4. Compliance Information 5.
PAGE 5
Inforce 6720™User Guide Terminology Terminology The table below gives descriptions to some common terms used in the User Guide.
PAGE 6
Inforce 6720™User Guide Table of Contents Table of Contents 1. SCOPE................................................................................................................................................... 1 2. HARDWARE SPECIFICATIONS............................................................................................................ 2 2.1 INTRODUCTION .......................................................................................................................................
PAGE 7
Inforce 6720™User Guide Table of Figures Table of Figures Figure 1: Block Diagram ..................................................................................................................................................................... 2 Figure 2: Inforce 6720 Interfaces .................................................................................................................................................... 4 Figure 3: Switches on IO Panel ............................................
PAGE 8
Inforce 6720™User Guide Table of Tables Table of Tables Table 1: Inforce 6720 Specifications ............................................................................................................................................. 3 Table 2: Inforce 6720 Interfaces ...................................................................................................................................................... 5 Table 3: Switch Functions .............................................................
PAGE 9
Inforce 6720™User Guide Scope 1. SCOPE This document describes the system setup and usage of Qualcomm Snapdragon 845 (SDA845) processor based Inforce 6720. Hardware Identification Labels Label are present on the Inforce 6720. The following information is conveyed on the product: 003767 Rev A ◼ Serial Number for Inforce 6720 ◼ WIFI & BT MAC address ◼ Ethernet MAC address MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION Confidential and Proprietary – Inforce Computing, Inc.
PAGE 10
Inforce 6720™User Guide Hardware Specifications 2. HARDWARE SPECIFICATIONS 2.1 INTRODUCTION The Inforce 6720 is an Application Ready Platform, based on Qualcomm’s 64-bit Snapdragon™ 845 processor (SDA845 SoC) with a low profile enclosure. Inforce 6720 can be used to develop, test, and deploy product solutions around Qualcomm Snapdragon 845 (SDA845) processor. 2.2 ARCHITECTURE The functional diagram of Inforce 6720 is shown below. Figure 1: Block Diagram 003767 Rev A MAY CONTAIN U.S.
PAGE 11
Inforce 6720™User Guide Hardware Specifications 2.3 SYSTEM SPECIFICATIONS The following table shows the hardware specification of Inforce 6720. Table 1: Inforce 6720 Specifications Processor Processor Qualcomm® SDA845 SoC Memory 4GB LPDDR4x 1866Mhz Main Memory and Storage 64GB UFS 2.1 IO Interfaces Interfaces 1× USB v3.0 Type-A, 1× USB v3.
PAGE 12
Inforce 6720™User Guide Hardware Specifications 2.5 USER INTERFACES The following figure shows the interfaces on the Inforce 6720. Figure 2: Inforce 6720 Interfaces 1 2 1 8 9 5 4 3 10 11 1 12 7 1 6 1 1 13 14 CAUTION Inforce 6720 has a thin PCB, handle with care while using the ports. 003767 Rev A MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION Confidential and Proprietary – Inforce Computing, Inc.
PAGE 13
Inforce 6720™User Guide Hardware Specifications Table 2: Inforce 6720 Interfaces Sl. No. 003767 Rev A Description 1 GPS SMA Female Receptacle 2 WIFI/BT SMA Female Receptacle 3 4x LEDs 4 Headphone Jack 5 USB 3.0 Type A Port 6 MicroSD Card Slot 7 WIFI/BT SMA Female Receptacle 8 RJ45 Ethernet Jack 9 12V DC Jack 10 Power ON Switch 11 Reset\Vol+ Switch 12 4K HDMI Input 13 4K HDMI Output 14 USB-C Port for Display and Debug MAY CONTAIN U.S.
PAGE 14
Inforce 6720™User Guide System Setup and Usage 3. SYSTEM SETUP AND USAGE 3.1 SWITCHES Following are the switches and functions on the Inforce 6720. Table 3: Switch Functions Switch Function Power Power ON Reset Reset\Vol + Comments o o o o o o Press to boot-up Once booted up press to Sleep While in Sleep press to Wake up Press and hold for power menu Volume+ control Optional factory reset Figure 3: Switches on IO Panel Power Reset 3.
PAGE 15
Inforce 6720™User Guide System Setup and Usage 3.3 WI-FI/BT ANTENNA Fasten the Wi-Fi/BT Antennae on to the SMA connectors on the IO panel as shown in below figure. Figure 5: Wi-Fi/BT Antennae on SMA Connectors Table 5: Antenna Details 003767 Rev A Manufacturer Manufacturer Part Number Qty Molex 2128600001 2 MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION Confidential and Proprietary – Inforce Computing, Inc.
PAGE 16
Inforce 6720™User Guide System Setup and Usage 3.4 INTERFACES Following are the interfaces on the Inforce 6720.
PAGE 17
Inforce 6720™User Guide System Setup and Usage 3.6 FASTBOOT MODE Follow the below steps to enter fastboot mode: 1. Power ON and boot up the Inforce 6720 2. Connect the USB-C port of 6720 to host PC using a USB Type-C to Type-A cable 3. Once the 6720 is booted up, open the command prompt in the PC and enter the following command adb devices • 4. Once ADB device is listed, enter bootloader using following command • 5.
PAGE 18
Inforce 6720™User Guide Compliance Information 4. COMPLIANCE INFORMATION 4.1 CLASS B PRODUCT COMPLIANCE STATEMENT Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
PAGE 19
Inforce 6720™User Guide Contact Information 5. CONTACT INFORMATION USA (Corporate Headquarters) Inforce Computing Inc. 48820 Kato Road, # 600B Fremont, California 94538 USA. Phone: +1 510 683 9999 Fax: +1 510 683 9909 For technical assistance refer: http://www.inforcecomputing.com/techweb For technical support contact: techsupport@inforcecomputing.com For sales contact: sales@inforcecomputing.com 003767 Rev A MAY CONTAIN U.S.