Table of Contents Keypad Features .................................................................................................... Cover Keypad Description ....................................................................................................... 3 Installing Batteries ......................................................................................................... 3 “Learn” Transmitter Code.............................................................................................
Keypad Description Keypad - Inside PROGRAM Button: RESET Button: Pressing this button for 2 seconds will reprogram keypad to factory settings. All codes are deleted. Default master code is 1234. 3 Use for/during program process. 4 5 6 STATUS Light: 7 8 9 + Battery Holder: + – 0 The LED will blink once when any key is pressed and provides visual feedback during access code programming. – 2 – 1 + Keypad - Front 3 AA batteries are required to power the keypad (not included). FIG.
Program the Keypad • • • • A Master Code is needed to add, remove, or program Entry Codes. Factory default Master Code is “1234.” Keypad can only enter “program” mode from “idle” mode. Keypad will beep three times before going into “idle” mode (more than 10 seconds between key presses). Programming Confirmed: Keypad will beep 3 times. Error Message: Status light will flash rapidly, error tone will sound for 1 second and keypad will return to “idle” mode (changes not saved). • Entry Code is not 4 digits.
Normal Keypad Operation: • If the user enters a 4-digit code that is matched to one of the 25 stored codes. The STATUS light should blink rapidly indicating that it is sending command to operator. • No more than 20 key presses are allowed to obtain the 4-digit entry code. Example: 1234 is one of the codes stored in one of the memory location. The user can enter “x1234” or “xxxxxxxxxxxxxxxx1234” and the gate should be activated (x is any key).
Limited One Year Warranty Gate That Open, LLC (GTO) gate opener accessories are warranted by the manufacturer against defects in workmanship for a period of one (1) year from the date of purchase, provided recommended installation procedures have been followed.
Notes 7
www.mightymule.