Quick start guide Raven
We’re delighted to invite you to our community of avid photographers and creators. The Raven is designed for those who defy convention and push the limits of what’s possible behind the lens. 2 We created the Raven with one goal in mind: bring total light control to your fingertips. We can’t wait to see what you create. The following guide is a quick start guide. To access the full documentation and see inspiring stories about the Raven, navigate to FusionTLC.
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Control Dial Getting Started Home SyncView Touchscreen 6 Nose Cone Light & Sensor Zone Button Microphone & Speaker Shoe Release Zone Control Display fusiontlc.com Hotshoe Plate Turning on the Raven Press and hold the Home button for 1 second. The FusionTLC icon and logo will appear while the Raven boots up. The Raven will then launch the Zone Control Display. Turning off the Raven Press and hold the Home button for 5 seconds. A slide-to-power-off button will appear.
Zone Control Display Enable a zone: a zone that is enabled will display an intensity value in its respective quadrant. If a zone is not enabled, no intensity value will be displayed. If a zone is enabled, the Raven will trigger it. To enable a zone, press and hold the Zone Button for 3 seconds OR tap and hold the zone field on the touchscreen for 3 seconds. The same process is used to disable a zone. Select a zone: a zone that is selected will display a white circle around the zone letter.
Prepare Raven In the Quick Settings Menu, tap the primary/ secondary brand selection button at the bottom. Select your primary and secondary flash brand from the list of available flash brands. If you are only utilizing one flash brand, select “None” for the secondary. Select the zone(s) for which you want to utilize a flash brand. Edit these zones to correspond to the desired use (i.e. TTL, Multi-Pop, etc).
Raven Warranty This FusionTLC product is covered by a oneyear limited warranty. For details and to register, navigate to FusionTLC.com/warranty or scan: 12 Support We’re here to help you. Visit FusionTLC.com/support or scan: fusiontlc.
