Smart Harvest Instruments HL100 Light Hotspot Miner User Manual https://smartharvest.
Whats in the Box HL100 Light Hotspot Miner Power Adapter 5 dBi Antenna Power Cable
Know your Light Hotspot Miner USB Power Port Antenna Connector Ethernet Port Reset Button Status LEDs
Set up your Light Hotspot Miner 1. Screw on antenna 2. Connect ethernet port to router 3.
Onboard your Light Hotspot Miner • Visit https://smartharvest.ca/onboard/index.
Hotspot Placement For best perfomance: • Do: Place as close to a window as possible • Do: Place raised from floor if possible - like a table or a windowsill • Don't: Put into a closet or behind furniture • Don't: Place close to mesh window screens - especially if they are metal Note: your Light Hotspot Miner must be placed at least 20cm (about 8") from other transmitters and people.
Regulatory Compliance Information FCC Compliance This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
ISED Statement English:This device contains licence‐exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence‐exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. The digital apparatus complies with Canadian CAN ICES‐3 (B)/NMB‐3(B).
Limited Warranty This product comes with a 1-year limited warranty that is valid only if product was purchased from Smart Harvest Instruments official stores or Smart Harvest Instruments authorized resellers. Learn more: https://smartharvest.ca/warranty-and-return/index.
