Smart Forced Air, Inc. Register Operators Manual Version 1.2 28 January 2019 Copywrite 2019, Smart Forced Air, Inc.
Liability Disclaimer BEFORE INSTALLING AND USING THIS SYSTEM PLEASE READ AND UNDERSTAND THIS IMPORTANT LIABILITY DISCLAIMER: Incidental, consequential, punitive, and other similar damages associated with the operation of our system components are liabilities not assumed by Smart Forced Air, Inc. In any event, our maximum financial liability is limited to the total cost of the SFA products associated with any claim.
Welcome! Thank you for your purchase of the Smart Forced Air Register product. Introduction The Register product is designed to allow the user to add climate control zones to their home or office. Each Register can be associated (i.e. linked) to one SFA (Smart Forced Air) Thermostat. Multiple Registers can be associated to one Thermosat. Physical Installation Verify that the size and type (floor, wall, or ceiling) of the SFA Register selected matches the size of the register that is being replaced.
How to Contact Us Find us on the web: www.smartforcedair.com Email Us: support@smartforcedair.com You can contact us via snail mail: Customer Service Smart Forced Air PO BOX 4090 Bozeman, MT 59772 Copywrite 2019, Smart Forced Air, Inc.
Warranty Smart Forced Air, Inc. (SFA) provides a two-year limited warranty against defects in materials and labor in the manufacturing process. The warranty period begins thirty days after we ship the product to the customer. We are aware of your shipping date and grant extra days to our warranty to allow for a reasonable worst-case shipping times and delays in getting the system installed and operational.
Regulatory Information FCC ID: 2ASCS-SFA2019REG4A1 CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation.