HDR-ULTRA HDMI 16x16 Matrix over Cat 5e/6 QUICK INSTALLATION GUIDE www.smartavi.
INTRODUCTION The HDR-ULTRA is a High Definition video router that enables users to route HD signals up to 425 feet over CAT 5e/6 cables, providing the ultimate solution to create clean and efficient video and digital signage systems in configurations up to 16x16. Pristine high definition video has become the standard for entertainment, video systems and digital signage, but HD video routing has been confined by the necessity of short, bulky and unsightly cables.
INSTALLATION 1. 2. 3. 4. Turn off all input devices and displays. Connect the HDMI cables from the input devices and to the “IN” ports on the HDR-ULTRA matrix. Connect the HDMI cables from the HDMI port of the HDX-Ultra Receivers to the HDMI displays. Connect the RJ-45 port of each HDX-Ultra Receivers to the respective “OUT” ports on the HDR-ULTRA using CAT5e/6 cables. 5. Power on the HDX-Ultra Receivers by plugging in their power adapters (5VDC2A). 6. Connect the power cord and power-on the HDR-ULTRA.
TCP/IP Control (NET-IP-Pro) Net-IP-Pro gives the user full control of the matrixes from anywhere in the world through this advanced new web browser software. It enables multiple users to control and configure the Matrix, including names of sources, names of displays, IP address and low level features of the Matrix. The Net-IP-Pro enables the support of telnet for easy integration with other control systems. LEARNING THE EDID OF THE MONITOR 1. Power on the HDR-ULTRA. 2.