Macaron N Series SM-MFAD4-C02 NFC Controller Module with Integrated Antenna Datasheet Version 2.3 Smart Approach Co., Ltd. Rm. 5, 3F., No.1, Taiyuan 2nd St., Zhubei City, Hsinchu County 302, Taiwan, R.O.C. +886-3-5601363 www.smart-approach.com.
SM-MFAD4-C02 Datasheet Smart Approach Co., Ltd (“S.A.”) retains the right to make changes to its products or specifications to improve performance, reliability or manufacturability. All information in this document, including descriptions of features, functions, performance, technical specifications and availability, is subject to change without notice at any time. While the information furnished herein is held to be accurate and reliable, no responsibility will be assumed by Smart Approach for its use.
SM-MFAD4-C02 Datasheet Revision 2.2 Revision 2.2 of this datasheet was published in Apr. 2022. Modify NFC connection recommendation on page 16, and added back the information which are vision 2.1 removed. Revision 2.3 Revision 2.3 of this datasheet was published in Apr. 2022. Modify some contents for application certification. -3- Revision 2.3 Apr.
SM-MFAD4-C02 Datasheet Contents REVISION HISTORY ............................................................................................................................. - 2 CONTENTS ........................................................................................................................................... - 4 FIGURE CONTENTS ............................................................................................................................ - 5 TABLE CONTENTS ...................
SM-MFAD4-C02 Datasheet Figure Contents Figure 1 Typical Application ................................................................................................. - 6 Figure 2 Typical Application II .............................................................................................. - 8 Figure 3 Module Block Diagram .......................................................................................... - 9 Figure 4 Transmission Modes .........................................................
SM-MFAD4-C02 Datasheet 1 Product Overview SM-MFAD4-C02 is full featured NFC controllers designed for integration in portable equipment. It is optimized for low power consumption with fully host controllable power states and for small footprint for portable equipment applications. The module’s compact, flexible design with and exposed pad is optimal for size-sensitive applications, assures robust performance. The following illustration shows a high-level, generic view of a SM-MFAD4-C02 application.
SM-MFAD4-C02 Datasheet Supported host interfaces – NCI protocol interface according to NFC Forum standardization – I2C-bus High-speed mode Integrated power management unit – Direct connection to a battery (2.3 V to 5.
SM-MFAD4-C02 Datasheet Figure 2 Typical Application II SM-MFAD4-C02 can be connected on a host controller through I2C-bus interfaces. The logical interface towards the host base band is NCI-compliant with additional command set for SA specific product features. Moreover, SM-MFAD4-C02 provides flexible and integrated power management unit in order to preserve energy supporting Powered by the Field and Power Off mode. -8- Revision 2.3 Apr.
SM-MFAD4-C02 Datasheet 2 Functional Descriptions This section provides detailed information about how SM-MFAD4-C02 module works, what configurations and operational features are available. The following illustration shows the primary functional blocks of SM-MFAD4-C02 module. Figure 3 Module Block Diagram Loop Antenna is Smart Approach customize solution, Antenna size of SM-MFAD4-C02 is 25mm x 25 mm. Antenna matching is also a customize solution.
SM-MFAD4-C02 Datasheet 1. According to ISO/IEC 18092(Ecma 340)standard. 2. PICC only for android HCE. Figure 4 Transmission Modes For contactless card functionality, SM-MFAD4-C02 can act autonomously if previously configured by the host in such a manner. PICC functionality can be supported without device being turned on or even with battery removed. 2.
SM-MFAD4-C02 Datasheet 3 Electrical Specifications This section provides the DC characteristics, AC characteristics, recommended operating conditions. It includes information on the various timing functions of the module. 3.1 Temperature Maximum Ratings Thermal specifications for this module have been modeled using a two-layer test board. Table 1 Temperature Maximum Ratings Value Symbol T TS Definition Operating Temperature Storage Temperature Units Min Max -30 85 ℃ -55 150 ℃ 3.
SM-MFAD4-C02 Datasheet 3.3 Antenna Specifications Antenna specifications for this module have been modeled using a two-layer test board. Table 3 Antenna Specifications Value Item DC Resistance AC Impedance Frequency Q factor Antenna Type Size Min Typ Max 0.5 1 2 Unit Note Ω Ω 50 13.06 13.56 14.06 25 30 35 MHz Add the Ferrite sheet FR4 Loop Coil (25 ±0.2) X (25±0.15) mm 3.
SM-MFAD4-C02 Datasheet 3.6 NFC Connection Recommendation Figure 5 Connection Recommendation 4 Ordering Information Table 6 Ordering Information Table Order Number Descriptions SM-MFAD4-C02 NFC Macaron Module (NXP PN7150) with Integrated Antenna Dimension Module: 25.0x48.4x2.46 mm - 13 - Revision 2.3 Apr.
SM-MFAD4-C02 Datasheet 5 Reliability Verification Table 7 Reliability Item Table No.
SM-MFAD4-C02 Datasheet 6 NFC Module Outline The following illustration shows the package drawing for SM-MFAD4-C02 module. The drawing contains the detail views, dimensions, tolerances, and notes. Figure 6 Antenna Module Drawing - 15 - Revision 2.3 Apr.
SM-MFAD4-C02 Datasheet Figure 7 Module FPC Connection Footprint (Button Contact) Figure 8 FPC Wire Dimension 7 Precautions FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
SM-MFAD4-C02 Datasheet user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/ TV technician for help.
SM-MFAD4-C02 Datasheet IC of the module, preceded by the words "Contains transmitter module", or the word "Contains", or similar wording expressing the same meaning, as follows: Contains FCC ID: 2AAYI-MFAD4-C02 Contains IC: 11378A-SMMFAD4C02 L'appareil hôte doit être étiqueté comme il faut pour permettre l'identification des modules qui s'y trouvent. L'étiquette de certification du module donné doit être posée sur l'appareil hôte à un endroit bien en vue en tout temps.
SM-MFAD4-C02 Datasheet 機設備之干擾。 本模組於取得認證後將依規定於模組本體標示審驗合格標籤，並要求最終產品平台廠商 (OEM Integrator) 於最終產品平台 (End Product) 上標示 ”本產品內含射頻模組，其 NCC 型式認證 號碼為: - 19 - CCXXxxYYyyyZzW ”。 Revision 2.3 Apr.
