Installation Instructions

AES
GmbH
RFID frequency
RFID protocol
Interface
Operating voltage range
Max. operating voltage
Max. power consumption
CAN bus speed
Temperature range
The application areas
of the rugged industrial
Such identification systems can launch vehicles, provide
UID
of authorized cards are stored in the device. The release takes place b
The
reader can be trained with the help of a “TeachOn”
MTR-reader with an USB HID
connection to the PC.
PC program.
When the device is turned on the reader starts with the protocol of the “TeachOn”
the reader. The firmware can be
convenient
The power supply comes maybe
from
are tolerated. For self-
protection the device has internal
voltage of approximately 70V,
a resettable
AES GmbH
Markt 14
D-99310 Arnstadt
Germany
GmbH
- D-99310 - Arnstadt - Markt 14 - +49-3628-
78300
Multi Frequency Reader SA2
13.56 MHz 125 kHz
ISO 14443a all typical tags
(extendable)
ISO 15693
CAN
8...60 V
72V
135 mW
125 kbit/s
500 kbit/s
-30...+70 °C
The reader supports the two main frequencies for
RFID cards. At the low frequency
range of av
ailable transponders are read. A
high frequency
13.56 MHz, the standards
ISO14443a and ISO15693 are implemented
devices are detected.
The readable card range can
be extended.
The reader
implements the
CAN bus. Two LED’s
indicate the acceptance or
rejection of the card.
of the rugged industrial
reader can be used wherever transponder cards must be identified.
Such identification systems can launch vehicles, provide
access fr
ee or allow other authorization
of authorized cards are stored in the device. The release takes place b
y means of a command on the CAN
reader can be trained with the help of a “TeachOn”
-card. To store the UID’s at th
e “TeachOn”
connection to the PC.
The user programs the UID's
on the reader
When the device is turned on the reader starts with the protocol of the “TeachOn”
convenient
updated via the CAN bus in the field.
from
vehicle batteries 12, 24 or
48V. Surges voltages as they occur during braking
protection the device has internal
suppressor diode triggers,
when crossing
a resettable
fuse.
The unit has reverse polarity protection against installation errors.
phone [phone]
78300
- www.ibri-aes.com
Multi Frequency Reader SA2
-
CAN
-
V2
(extendable)
The reader supports the two main frequencies for
RFID cards. At the low frequency
125 kHz, a wide
ailable transponders are read. A
t the
13.56 MHz, the standards
ISO14443a and ISO15693 are implemented
. NFC
The readable card range can
implements the
physical interface to the
indicate the acceptance or
reader can be used wherever transponder cards must be identified.
ee or allow other authorization
or prohibit. The
y means of a command on the CAN
-bus.
e “TeachOn”
-card there exist a
on the reader
using a convenient
When the device is turned on the reader starts with the protocol of the “TeachOn”
-card to configure
48V. Surges voltages as they occur during braking
when crossing
the threshold
The unit has reverse polarity protection against installation errors.
[e-mail]
www.ibri-aes.com