User's Manual

100mm
140mm
20211214
User manual
Foreword Check list
·Instructions·
Thank you for choosing SmallRig RC 120D LED Video Light.
- RC120D -
1. Please read this user manual carefully.
2. Keep this user manual and always include it when passing the product onto the third party.
3. Heed all warnings and follow all instructions in this user manual.
4. Close supervision is necessary when any fixture is used by or near children. Do not leave the
fixture unattended while in use.
5. Care must be taken as burns can occur from touching hot surfaces.
6. Do not operate the fixture if a cord is damaged or if the fixture has been dropped or damaged until
it has been examined by qualified service personnel.
7. Position any power cables so that they will not be tripped over, pulled or put into contact with hot
surfaces.
8. If an extension cord is necessary, a cord with an amperage rating at least equal to that of the
fixture should be used. Cords rated for less amperage than the fixture may overheat.
9. Always unplug the lighting fixture from the electrical outlet before cleaning and servicing or when
not in use. Never yank the cord to remove the plug from the outlet.
10. Let the lighting fixture cool completely before storing.
11. To reduce the risk of electric shock, do not immerse this fixture in water or any other liquids.
12. To reduce the risk of fire or electric shock, do not disassemble this fixture. Contact
[e-mail] or take it to qualified service personnel when service or repair work is
required.
13. The use of an accessory attachment not recommended by the manufacturer may increase the
risk of fire, electric shock, or injury to any person operating the fixture.
14. Power this fixture by connecting it to a grounded outlet.
15. Please remove the protection cover before powering the light.
16. Please remove the EVA protection cover before using the reflector.
17. Please do not block the ventilation and do not look at the light directly when it is powered on.
18. Please do not place the LED lighting fixture near any liquids or other flammable objects.
19. Only use a dry microfiber cloth to clean the product.
20. Please have the product checked by an authorized service personnel agent if your product has a
problem.
21. The malfunctions caused by unauthorized disassembly are not covered under the warranty.
22. We recommend only using the original SmallRig cable accessories. Please note that our warranty
for this product does not apply to any repairs required due to any malfunctions of unauthorized
SmallRig accessories, although you may request such repairs for a fee.
23. This product is certified by CE,UKCA,RoHS,FCC,IC,TELEC and RMC.Please operate the product in
full compliance with the operation standards. Please note that this warranty does not apply to
repairs arising from malfunctions, although you may request such repairs on a chargeable basis.
24. The instructions and information in this manual are based on thorough, controlled company
testing procedures. Further notice will not be given if the design or specifications change.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your
authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable
exposure condition without restriction.
English:This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and
Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the
device.
The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B).
French: Cet appareil contient des émetteurs/récepteurs exempts de licence qui sont conformes aux RSS exemptés
de licence d'Innovation, Sciences et Développement économique Canada.
L'exploitation est soumise aux deux conditions suivantes :
(1) Cet appareil ne doit pas provoquer d'interférences.
(2) Cet appareil doit accepter toute interférence, y compris les interférences susceptibles de provoquer un
fonctionnement indésirable de l'appareil.
l'appareil numérique du ciem conforme canadien peut - 3 (b) / nmb - 3 (b).
This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with
RSS 102 RF exposure, users can obtain Canadian information on RF exposure and compliance.
cet appareil est conforme à l'exemption des limites d'évaluation courante dans la section 2.5 du cnr - 102 et
conformité avec rss 102 de l'exposition aux rf, les utilisateurs peuvent obtenir des données canadiennes sur
l'exposition aux champs rf et la conformité.
This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment.
Cet équipement est conforme aux limites d'exposition aux rayonnements du Canada établies pour un
environnement non contrôlé.
The device has been evaluated to meet general RF exposure requirement
This equipment should be installed and operated with minimum distance 0mm between the radiator & your body.
L'appareil a été évalué pour répondre aux exigences générales d'exposition aux RF. Cet équipement doit être
installé et utilisé avec une distance minimale de 0 mm entre le radiateur et votre corps.
.
When you unbox the product, please make sure all the items below are included. Otherwise, contact
with the seller immediately.
Product Details
1. Light
Installations
1. Attaching /detaching the protection cover
The power supply
1. Powered by AC
Photometrics
Bowens Mount
Push the handle of the lever in the direction of the arrow shown in the picture, and rotate the cover to pull
it out. Reverse rotation will put into the protection cover.
（* Notice: Always remove the protection cover prior to turning on the light. Always reinstall the cover when packing it away.）
Notice: Please press the spring-loaded lock button on the power cord to remove the cord.
Do not pull it out forcibly.
Notice :
(1) Please press the spring-loaded lock button on the power cord to remove it. Do not pull it out forcibly.
(2) V-mount battery plate, battery, and power cable are not standard configurations and need to buy separately.
(3) The input voltage of the light is between DC 12V and DC 30V.
(4) The V-mount batteries that are 14.4V or 26V with the capacity above 150Wh are recommended to use with
the light.
COB LED
55° Reflector
Locking handle
Soft light unbrella hole
Tie Down
Release Latch
OLED Display
DC-in connector
INT adjusting knob
Bluetooth Reset key
ON/OFF
RC 120D
- 1 -
Protection cover
55°Hyper-Reflector AC adapter Power cable
Carrying bag
2. Installation and removal of the reflector
Push the lever handle according to the arrow direction shown in the picture and rotate the reflector into it.
Rotating in the opposite direction pulls out the reflector.
2. Powered by V-mount battery
3. Setting up the light
Adjust the light to the appropriate height, rotate tie-down to fix the light on the stand. Then,adjust the light
to the required angel and tighten the lock handle.
4. Soft light umbrella installation
Insert the soft light handle into the hole and lock the knob on the hole.
AC 100V-240V
ATTENTION
DO NOT TOUCH LED
Light Source Surface
FX/FREQ adjusting knob
- 2 - - 3 - - 4 - - 5 -
- 6 -
- 7 - - 8 - - 9 - - 10 -
3. Bluetooth reset
3.1 Long press the Reset button for 3 seconds, the Bluetooth icon will appear in the upper right if the LCD display.
The icon flashes 6 times and the Bluetooth is reset.
3.2 Then you can connect the light through SmallGoGo and control it again.
4. OTA mode
3″
Notice: The brightness of every FX can be set separately
Firmware updates can be updated online via the SmallGoGo App for OTA updates.
INT:
FRQ: FX:
100%
1
Normal
INT:
FRQ: FX:
100%
1
Normal
Operations
1. Press the power button to turn the light on and off.
2. Manual control
2.1 Brightness adjustment
Rotate the INT adjusting knob to adjust the brightness with 1% variable and the brightness
change range is 0-100%, the change of the brightness will be displayed in real time on the light body.
Service Warranty
Please keep your original purchase receipt and warranty card, including your
purchase date, product serial number, etc., which are required for the warranty
service.
This warranty does not cover
Defect caused by users' violation of the “Instructions” and “Operation Instruc-
tions”.
The product identification or SN label is removed or defaced in any way.
The product is serviced or repaired by anyone other than our company or the
service agency authorized by our company.
1.
2.
3.
After-sale warranty terms
7 Days DOA Return Policy: Within 7 Days from the package receipt date, return
or replacement can be done if the item received is malfunctioning or physically
damaged (non-artificial damage), return shipping cost will be on SmallRig's
charge.
30 Days Free-Reason Return Policy: Within 30 Days from the package receipt
date, return or replacement can be done if the item is in good condition (without
any malfunction or physical damage ). The return shipping cost will be on the
customer's charge.
1-Year Warranty: Within 1-year from the package receipt date, the defective
product (non-artificial damage) is eligible to get repair/replacement for free. The
defective product (artificial damage) will be charged for repairing/replacement
based on the damage level.
1.
2.
3.
Guarantee Card
Serial No.
Item Name
Purchase Date
User Name
Mobile
Address
Receipt
Made in China
INT:
FRQ: FX:
80%
1
INT:
FRQ: FX:
80%
0%
~
100%
1
Normal
Normal
INT:
FRQ: FX:
80%
Normal
~
10
1
1
*This is an averaged result,the number might be slightly different on each light.
LQ-P332-18
说明书
3470
2.3 FX control
Specifications
5. App control
Light
Operating Current
Light Power Supply
Adapter
Power Supply
TLCI
Color Temperature
Radio Frequency
Size
Power Consumption
Cooling Mode
CRI
App Control Type
Remote Ability
Power supply
Weight
The user can download the SmallGoGo App and connect the the device named 120D-xxxxxx. After the light
is controlled by the App,the Bluetooth icon will be displayed on the upper right of the light LCD.
6. Using the SmallGoGo App
You can download the SmallGoGo App from the iOS App or Google Play Store for enhancing the
functionality of the light.
Please visit www.smallgogo.com for more details regarding how to use the app to control you lights.
* Please visit www.smallgogo.com for more details
regarding how to use the App to control you lights.
INT:
FRQ: FX:
100%
1
Normal
Notice: Please enable the mobile location function when using the App.
Operation Manual App Download
150W
DC12-30V Active Cooling
AC100-240V 50/60Hz
Bluetooth
5600k 100m
2.4GHz AC / V-mount batteries
240×122×237.6 mm 2425 g
CCT 1m 3m 5m
499(fc) 56(fc) 23(fc)
5370(lux) 605(lux) 246(lux)
5818(fc) 457(fc) 156(fc)
62600(lux) 4920(lux) 1680(lux)
Illumination
Bare Bulb
Hyper-Reflector
5600K
Distance
a. Rotate the FX knob on the right to get Normal and Paparazzi/TV/Fault bulb/Lightning/Breath/Party/Flash/
Flame/Firework , nine kinds of FX.
b. Shot Press the FX knob then switch to the frequency adjustment, the change range is 1-10.
7.9A(@DC 19V)
95+
96+
Normal/Paparazzi/TV/Fault bulb/
Lightning/Breath/Party/Flash/Flame/Firework
ISED Statement
LED Video Light