User's Manual

Table Of Contents

Technical Description 1/3 HoMan-MultiRFBoard-eng-T-TBUS113210

1 Information on this Document

Validity

This document is valid for the Multi-RF Board of type HM-MRFB.BG1. You will find the type

designation on the type label on top of the Multi-RF Board.

Purpose

This document is for the certification of the Multi-RF Board. The document summarizes the technical

data of the Multi-RF Board as well as information regarding FCC and IC Compliance of the Multi-RF

Board.

2 Multi-RF Board

The Multi-RF Board is a radio modem module. It allows the data exchange in WPAN radio networks.

The Multi-RF Board contains two radio systems:

• ZigBee radio system in 2.4 GHz ISM band

• 868.3 MHz radio system (automatically deactivated for the USA and Canada)

The Multi-RF Board has its own internal voltage controller. The antennas are integrated and strongly

attached to the printed circuit board. No external antenna can be connected.

Mechanical Data

Voltage supply

Terminals

Communication

Width x height x depth 1

⁄

in. x 4

⁄

in. x

⁄

in.

(30mmx108mmx23mm)

Voltage supply via 2 x 5-pole pin header

Input voltage 5 V

Current consumption < 250 mA

Number of 2 x 5-pole pin headers 1

Data transmission via 2 x 5-pole pin header

Interface SPI interface with 3.3 V logic

Pulse frequency of the interface max. 1 MHz

MULTI-RF BOARD

Radio modem module

Version: 1.0

PAGE 1
MULTI-RF BOARD Radio modem module Version: 1.0 1 Information on this Document Validity This document is valid for the Multi-RF Board of type HM-MRFB.BG1. You will find the type designation on the type label on top of the Multi-RF Board. Purpose This document is for the certification of the Multi-RF Board. The document summarizes the technical data of the Multi-RF Board as well as information regarding FCC and IC Compliance of the Multi-RF Board.
PAGE 2
SMA America, LLC Multi-RF Board ZigBee radio system in 2.4 GHz ISM band Frequency range Number of frequency channels Distance of frequency channels Bandwidth of the radio signal Transmitting power Standard for radio transmission Selection of antenna (antenna diversity) Selection of the frequency channel 2 405 … 2 480 MHz 16 5 MHz 2 MHz +17 dBm IEEE 802.15.4 automatically automatically 868.3 MHz radio system* Frequency 868.3 MHz *This radio system is automatically deactivated for the USA and Canada.
PAGE 3
SMA America, LLC FCC and IC Compliance Information 3 FCC and IC Compliance Information This device complies with Part 15 of the FCC Rules and with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.