Q-Series Q-AMP – Q-DI – Q-Pre Operating Manual english
SAFETY INSTRUCTIONS CAUTION: To reduce the risk of electrical shock, do not remove the cover or rear panel of this unit. No user serviceable parts inside. Please refer servicing to qualified personnel only. WARNING: To reduce the risk of fire or electrical shock do not expose this appliance to rain or moisture. DETAILED SAFETY INSTRUCTIONS All safety and operation instructions of this manual should be read and adhered to before operation.
FOREWORD Dear Customer, Thank you very much for expressing your confidence in SM Pro Audio products by purchasing this unit. The Q-Series have been designed to be used as standard tools for home/pro studios, P.A. rental companies, Schools and in many other situations where audio products would be used. With much experience in the audio industry over a long period of time, and along with valuable suggestions from our customers, our engineers have developed a product series we know you will be satisfied with.
2. Q-AMP Main Features Professional, multi-purpose headphone amplifier system for stage and studio applications. · Four totally independent stereo high-power amplifiers in Half 1 RU package · High quality audio even at extremely high volume levels · Two independent stereo input sections · 1/4” (6.5mm) and 1/8” (3.5mm) stereo headphone outputs per channel · Output level control for each channel · Independent selection of input for each output · High-quality components and rugged constructionˇ 3.
. Q-Amp Back panel The back panel has 2 stereo inputs. If you like to listen to a mono signal, you should connect it to the left input jack. 2 Stereo Line Level 1/4” Jack inputs 6. APPLICATION 6.1 Using the Q-Amp as a headphone amplifier Connect a stereo (L&R) program source (2 x 1/4” Inch Jacks) to the rear of the Q-Amp using one of the available 2 x stereo input pairs on the rear panel. You can also connect a Mono signal to the input channel and split the signal into both sides of the headphone.
DIST, FREQ, S/N RATIO & CROSSTALK: Frequency response 20Hz~20kHz, 0dB~-2B Distortion 0.02% S/N Ratio better than 80dB Crosstalk rejection >72dB@1kHz;-20dBinput POWER SUPPLY: Mains voltages USA/Canada ~ 120 V AC, 60 Hz U.K./Australia ~ 240 V AC, 50 Hz Europe ~ 230 V AC, 50 Hz General export model ~ 100-120 V AC, ~ 200-240 V AC, 50-60 Hz Power consumption 6.
10.1 Rotary volume controls for each channel to line mixer stereo output Use these variable controls to set the level of each channel signal level sent to the stereo master output section. 10.2 Rotary pan controls for each channel to line mixer stereo output Use these variable controls to set the pan of each channel signal level sent to the stereo master output section 10.3 Four independent 20 dB/40 dB PAD switches Use these switches to PAD each input channel signal level by 20dB or 40dB.
12. APPLICATION 12.1 Using the SM DI4V as a DI Box (direct injection unit) Connect the signal you would like to convert from unbalanced to balanced to the SM DI4V via a 1/4 inch unbalanced jack to one of the channel inputs on the front panel of the unit. Connect an XLR balanced cable to the corresponding channel output on the rear of the SM DI4V and connect to your chosen destination. If the input signal strength is too "hot" (high) you can depress the 20dB PAD switch to adjust to a ore appropriate level.
PHYSICAL: Dimension 1 3/4" (44.5 mm) * 8" (230.6 mm) * 8 1/2" (217 mm) Net weight approx. 1.75 kg 14. Q-Pre Main Features Professional, multi-purpose multi-channel pre-amplifier system for studio applications · Four totally independent pre-amplifiers in half 19” rack package · High quality audio · 4 x balanced inputs · 4 x unbalanced outputs · Phantom On/Off per 2 channels · 4 x peak Light indicators · Individual gain control on each channel 15.
17. Q-PRE Back panel 17.1 The Back panel phantom power switches Each channel features a phantom power supply for enabling the supply of 48v through the XLR input connector to power condenser microphones. Each Switch controls 2 channlels. 17.2 Balanced output connectors Balanced signal outputs to connect to a mixer, stage box, etc. 17.1 The Back panel phantom power switches 17.2 Balanced output connectors 18. APPLICATION Using the Q-Pre It could not be simpler to use and operate the Q-Pre.
DIST, FREQ, S/N RATIO & CROSSTALK: Frequency response 20Hz~20kHz, 0dB~-2B Distortion 0.02% S/N Ratio better than 80dB Crosstalk rejection >70dB@1kHz;-20dBinput POWER SUPPLY: Mains voltages USA/Canada ~ 120 V AC, 60 Hz U.K./Australia ~ 240 V AC, 50 Hz Europe ~ 230 V AC, 50 Hz General export model ~ 100-120 V AC, ~ 200-240 V AC, 50-60 Hz Power consumption 8.
7. WARRANTY CARD To be protected by this warranty, the buyer must complete and return the enclosed warranty card (signed/stamped by retail dealer) within 14 days of the date of purchase to SM Pro Audio (see address below 3). Failure to return the card in due time (date as per postmark) will void any extended warranty claims. 7.1 WARRANTY 1.
7.3 WARRANTY REGULATIONS 1. Warranty services will be furnished only if the product is accompanied by an original retail dealer's invoice. Any product deemed eligible for repair or replacement by SM Pro Audio under the terms of this warranty will be repaired or replaced in the best possible manner. 2.
Q-Serie Q-AMP – Q-DI – Q-Pre Bedienungsanleitung Deutsch
Sicherheitshinweise ACHTUNG: Bitte lesen Sie die nachstehenden Sicherheitshinweise sorgfältig durch, bevor Sie das Gerät in Betrieb nehmen! Geeigneter Aufstellungsort Betreiben Sie das Gerät nur in geschlossenen Räumen. Betreiben Sie das Gerät niemals in feuchter Umgebung wie z.B. Badezimmern, Waschküchen oder Schwimmbecken. Betreiben Sie das Gerät nicht in extrem staubigen oder schmutzigen Umgebungen. Achten Sie auf ungehinderte Luftzufuhr zu allen Seiten des Gerätes.
Vorwort Sehr geehrte(r) Käufer/-in, wir beglückwünschen Sie zum Kauf der SM Pro Audio Q-Serie. Wir garantieren Ihnen eine hochwertige Verarbeitungsqualität in Verbindung mit exzellenten audiotechnischen Eigenschaften zu einem unschlagbaren Preis-Leistungsverhältnis. Die Q-Serie wurde von uns für Home- und Pro-Studios, PA-Firmen, Schulen und für viele weitere Anwendungsgebiete geschaffen.
5. Q-AMP Produktbeschreibung Professionelles, vielseitiges Kopfhöhrerverstärkersystem für den Studio- und Live-Einsatz. · vier unabhängige, leistungsfähige Stereo-Verstärker in einem 9,5’’-Gerät · verzerrungsarme Wiedergabe besonders bei hohen Lautstärken · zwei unabhängige Stereo-Eingänge · 6,5-mm- und 3,5-mm-Kopfhörereingänge in Stereo pro Kanal · Ausgangslautstärkeregler pro Kanal · unabhängige Quellsignalauswahl pro Kanal · hochwertige Bauteile und solide Konstruktion 6.
8. Q-Amp Rückseite Die Rückseite bietet Ihnen zwei Stereo-Eingänge. Falls Sie ein Monosignal an den QAmp anschließen möchten, benutzen Sie bitte jeweils die linke Eingangsbuchse. 9. Anwendung 9.1 Den Q-Amp richtig einsetzen Schließen Sie ein Stereosignal an eine der beiden Eingangspaare auf der Rückseite an. Sie können natürlich auch ein Monosignal abhören. Dazu benutzen Sie bitte den jeweils linken Eingang, damit Sie das Monosignal nicht nur auf dem linken Kanal hören.
11. Q-DI Produktbeschreibung Professionelle, vielseitige DI Box mit Line-Mischer für den Studio- und Büheneinsatz. · vier unabhängige DI Boxen in einer 9,5-Zoll-Einheit · vier unabhängige 20dB-Dämpfungsschalter · vier unabhängige Ground-Lift-Schalter · vier unabhängige Lautstärkeregler für den Stereomixausgang · vier unabhängige Panoramaregler für den Stereomixausgang · Master-Laustärkeregler · Kopfhörerausgang 12.
14. Q-DI Rückseite 14.1 Symmetrische XLR-Ausgänge Symmetrische Ausgänge zum Anschluss an eine Stage Box, Mischpult, etc. 14.2 Unsymmetrischer Stereo-Line-Mixer-Ausgang Der, von den XLR-Ausgängen unabhängige Monitormix Ihrer vier Kanäle. 14.1 Symmetrische XLR-Ausgänge 14.2 Unsymmetrischer Mix-Ausgang 15. Anwendung 15.1 Die Q-DI als DI-Box verwenden Schließen Sie die unsymmetrische Signalquelle, die Sie in symmetrische Signale wandeln möchten, an den entsprechenden Eingang auf der Vorderseite der Q-DI an.
Messwerte: Frequenzgang: 20 Hz - 20 kHz, 0 dB bis -2 dB Verzerrung: 0,02% Rauschabstand: besser als 74dB Übersprechung: > 80 dB@1 kHz; -20 dB Input Stromversorgung: USA/Kanada ~ 120 V AC, 60 Hz U.K.
17. Q-PRE Rückseite 17.1 Schalter zur Aktivierung der Phantomspeisung Jeder Kanal bietet Ihnen eine 48-V-Phantomspeisung zur Versorgung einen Kondensatormikrofons. Beim Q-Pre können Sie mit den beiden Schaltern auf der Rückseite diese Phantomspeisung paarweise, also für Kanal 1/2 sowie Kanal 3/4, ein- bzw. ausschalten. 17.2 Symmetrische Klinkenausgänge Symmetrische Ausgänge zum Anschluss an ein Mischpult, einer Stage Box, etc. 17.1 The Back panel phantom power switches 17.2 Balanced output connectors 18.
Messwerte: Frequenzgang: 20 Hz - 20kHz, 0 dB bis -2dB Verzerrung: 0.02% Rauschabstand: besser als 80 dB Übersprechung: > 70 dB@1 kHz;-20dB Input Stromversorgung: USA/Kanada ~ 120 V AC, 60 Hz U.K.
7. Garantie 7.1 Produktregistrierung Um zukünftige Abwicklungen im Garantierfall zu erleichtern, bitten wir Sie innerhalb von 14 Tagen nach dem Erwerb Ihr SM Pro Audio Produkt zu registrieren. Bitte schicken Sie dazu einfach einen formlosen Brief oder eine Postkarte mit Seriennummer und Produktname zu uns (Adresse siehe unten). Alternativ können Sie sich auch im Internet unter www.smproaudio.de registrieren. 7.
- SM Pro Audio Europe behält sich vor, Anpassungen oder Änderungen vorzunehmen, um den nationalen oder örtlichen Sicherheitsanforderungen des Landes zu entsprechen. Solche Modifikationen gelten nicht als Herstellungs- oder Materialfehler. Die Garantieleistung gewährleistet nicht die Vornahme solcher Modifikationen. Die Kosten für solche Veränderungen/ Modifikationen können von SM Pro Audio Europe nicht übernommen werden.