Specification Sheet
EAF-250-ISM
The information contained in this document is subject to change without notice.
Optima Lino EAF-250 S.S. — Rev. 0d (01/09)
This space for Architect/Engineer approval
Job Name Date
Model Specified Quantity
Variations Specified
Customer/Wholesaler
Contractor
Architect
Electronic Hand Washing Faucet
The new Optima faucet
— Bringing intelligence to water
Sloan’s new Optima EAF-250 Series electronic hand
washing faucets operate by means of a dual infrared sensor
and microprocessor based logic. The modular design
incorporates all of the operating components of the faucet,
including the sensor, solenoid, circuitry and battery above the
sink within a die-cast metal spout.
ISM models feature an integral temperature control lever which
allows the user to adjust the water temperature. This adjustment
can also be converted to a fixed setting. EAF faucets ordered
without the ISM variation must be connected to a single, pre-
tempered water supply.
The i.q.-Click feature allows the user to place the faucet into
optional function modes, including “continuous run” and
“temporary off” simply by pressing a button on the spout. The
use of the i.q.-Click feature is recommended only in
installations where users have a regular familiarity with the
faucet (i.e., executive and non-public rest rooms). Models
furnished with the i.q.-Click feature are also available with a
Drain Pop Up.
Optima EAF-250 series faucets include a 6 VDC lithium
battery. Battery life is approximately three (3) years.
EAF-250
Description
Battery Powered, Sensor Activated, Electronic Hand Washing Faucet for pre-
tempered or hot and cold water operation.
Battery Powered Models
EAF-250 Single Supply Faucet
(For pre-mixed water only)
EAF-250-ISM With Integral Spout Temperature Mixer
(For Hot and Cold water supply connection)
EAF-250-ISM-IC With Integral Spout Temperature Mixer
and i.q.-Click Feature
EAF-250-ISM-DPU-IC With Integral Spout Temperature Mixer,
Drain Pop Up and i.q.-Click Feature
Flow Rate
0.5 gpm/1.9 Lpm Aerator Spray Head
Specifications
Sensor Activated, Electronic, Chrome Plated Die-Cast Metal, Hand Washing
Faucet with the following features:
• Modular One-piece Construction with all Concealed Components above
deck
• Double Infrared Sensors with Automatic Setting Feature and Microprocessor
• Low Battery Indicator
• Magnetic Solenoid Valve
• Water Supply Connection with Flexible High-pressure Hose and Strainer
• 6 volt Lithium CR-P2 Commercial Battery included
• Appropriate Mounting Hardware included
Variations
ISM Integral Spout Mixer
IC
i.q.-Click feature
DPU Drain Pop Up
Accessories
• Trim Plates
ETF-312-A
Trim Plate for 4” (102 mm) Centerset Sink
ETF-510-A
Trim Plate for 8” (204 mm) Centerset Sink
Trim Plates must be specified and ordered separately
• Aerators
EAF-10
2.2 gpm/8.3 Lpm Aerator Spray Head
EAF-13
2.2 gpm/8.3 Lpm Laminar Flow Spray Head
• Faucet Extension Kits
EAF-35-A
Faucet Extension Kit
EAF-30-A
Faucet Extension Kit (International Version – has 1/2G inlet
connections)
Warranty
3 year (limited)
ADA Compliant
Compliant to:
ASME A112.18.1 and CSA B125.1