Specification Sheet

EAF-250-ISM
u
u
u
u
EAF-250
The information contained in this document is subject to change without notice.
Optima Lino EAF-250 S.S. — Rev. 1a (09/10)
This space for Architect/Engineer approval
Job Name Date
Model Specified Quantity
Variations Specified
Customer/Wholesaler
Contractor
Architect
u
u
u
Electronic Hand Washing Faucet
The new Optima faucet
— Bringing intelligence to water
Sloan’s new Optima EAF-250 Series electronic hand washing faucets
operate by means of a dual infrared sensor and microprocessor based logic.
The modular design incorporates all of the operating components of the
faucet, including the sensor, solenoid, circuitry and battery above the sink
within a die-cast metal spout.
ISM models feature an integral temperature control lever which allows the
user to adjust the water temperature. This adjustment can also be converted
to a fixed setting. EAF faucets ordered without the ISM variation must be
connected to a single, pre-tempered water supply.
The
i.q.-Click
feature allows the user to place the faucet into optional function
modes, including “continuous run” and “temporary off” simply by pressing a
button on the spout. The use of the
i.q.-Click
feature is recommended only in
installations where users have a regular familiarity with the faucet (i.e.,
executive and non-public rest rooms). Models furnished with the
i.q.-Click
feature are also available with a Drain Pop Up.
Optima EAF-250 series faucets include a 6 VDC lithium battery. Battery
life is approximately three (3) years.
EAF-250
Description
Battery Powered, Sensor Activated, Electronic Hand Washing Faucet for pre-tempered or hot and
cold water operation.
Battery Powered Models
£
EAF-250
Single Supply Faucet
(For pre-mixed water only)
£
EAF-250-ISM
With Integral Spout Temperature Mixer
(For Hot and Cold water supply connection)
£
EAF-250-ISM-IC
With Integral Spout Temperature Mixer
and
i.q.-Click
Feature
£
EAF-250-ISM-DPU-IC
With Integral Spout Temperature Mixer,
Drain Pop Up and
i.q.-Click
Feature
Flow Rate
£
0.5 gpm/1.9 Lpm Aerator Spray Head
Specifications
Sensor Activated, Electronic, Chrome Plated Die-Cast Metal, Hand Washing Faucet with the
following features:
• Modular One-piece Construction with all Concealed Components above deck
• Double Infrared Sensors with Automatic Setting Feature and Microprocessor
• Low Battery Indicator
• Magnetic Solenoid Valve
• Water Supply Connection with Flexible High-pressure Hose and Strainer
• 6 volt Lithium CR-P2 Commercial Battery included
• Appropriate Mounting Hardware included
Variations
£
ISM
Integral Spout Mixer
£
IC i.q.-Click
feature
£
DPU
Drain Pop Up
Accessories
•
Trim Plates
£
ETF-312-A
Trim Plate for 4” (102 mm) Centerset Sink
£ ETF-510-A Trim Plate for 8” (204 mm) Centerset Sink
Trim Plates must be specified and ordered separately
•
Aerators
£
EAF-10
2.2 gpm/8.3 Lpm Aerator Spray Head
£
EAF-13
2.2 gpm/8.3 Lpm Laminar Flow Spray Head
•
Faucet Extension Kits
£
EAF-35-A
Faucet Extension Kit
£
EAF-30-A
Faucet Extension Kit (International Version – has 1/2G inlet
connections)
Warranty
3 year (limited)
Compliant to:
ASME A112.18.1-2005/CSA B125.1-05, ISO/IEC 17025
This product may
contribute to
LEED credits.
See details on LEED
calculation worksheet.