With Sleep IQ Firmness control system
Setting up your SleepIQ Firmness Control System……………pg 4 Wi-Fi Configuration…..……………………………………………………..
Sleep IQ Firmness Control™ System 1 5 2 3 • Open the door located above the hose connections on the end of the pump. Inside you will find the Sleep IQ module. Push on it to ensure fully engaged and close the door. 6 • Unplug the pump and begin Wi-Fi configuration set up • Plug the two voice control modules into the connectors located in between the pump hose ports at the end of the pump.
Sleep IQ Firmness Control™ System – Wi-Fi Configuration •Remove the USB stick from the pump box and go to a computer or device that both has a USB port and can connect to the internet •Log into URL at: http://uitest.zepp.bamlabs.com/zep_webapp/#/signin •Create your account if you haven’t already done so utilizing the link and log on information you received via email when you purchased your bed •When all 5 of the LED lights are on you can remove the USB stick from the pump.
Sleep IQ Firmness Control™ System – Wi-Fi Troubleshooting Light On Blinking Off Try this No power to pump 1 Pump is receiving power Pump is booting up 2 Pump is working and bound to a remote Remote attempting to Pump Nonbind Functional Rebind your remote 3 Pump computer is connected to your home network Attempting to connect to your network Return to your account settings and reenter your network name and password.
Voice control module 2 2 7
Voice Control Modules (2) Sleep IQ Firmness Control System 88
The equipment described in this guide has been tested and found compliant with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.