User's Manual

Finding Your Comfort Level
Congratulations on the successful assembly of your foundation. Now
you are ready to assemble your SLEEP NUMBER
®
mattress. It can be
quickly and easily completed without tools.
Sleep Number
®
9000 Model owners:
After completing the foundation assembly
instructions in the Owner’s Manual, refer
to these mattress assembly and Firmness
Control
™
system instructions instead of
those in the Owner’s Manual.
Sleep Number
®
9000 Model
Carefully Check the Contents
of Your Mattress Boxes
If you are missing any items listed on the
following page, please e-mail Customer Service
at [e-mail]
or call 1-800-472-7185.
Orientation
These instructions refer to “left” and “right”
as if you are standing at the head of the bed
looking toward the foot of the bed.
Prepare Your Foam Pads
Carefully open the Foam Comfort Pads and
Foam Base Pad and set aside.
NOTE: At least 20 minutes of expansion
time is needed.
before you begin
It is wonderful! After
only one night, we both
commented that we
had the best night’s
sleep in years!
Lowell S.
Flagstaff, AZ
Congratulations on the successful assembly
of your SLEEP NUMBER
®
bed. Now you
are ready to find your comfort level.
Firmness Control
™
system 9000
Unlike innerspring mattresses, a Sleep Number
®
bed can be personalized at any time to the
changing condition of your body. Some
reasons to alter the firmness of your bed
include:
• strained muscles
• back pain
• weight change
• pregnancy
• bad sunburn
In addition to personalizing your bed for
a great night's sleep, you can also alter the
mattress firmness when you wake in the
morning in order to:
• facilitate getting out of bed, if needed
• achieve a “fuller” bed appearance
Dual Adjustability
If you purchased a dual chamber model, you
have the ability to personalize each side of your
Sleep Number
®
bed. Since no two body types
are the same, each sleep partner should find
their own comfort level.
If your model came with one remote for a dual
chamber bed, pressing the “L” button on the
remote enables you to make changes to the
left side of the bed (left is determined when
laying on your back on the bed).
before you begin
NOTE: A 9-volt battery is included
and should last about six months under
normal use. Replace the battery when
the low battery indicator is displayed.
2 Wired Remotes
Firmer (top button)
Softer (bottom button)
Setting Your Sleep Number
®
STEP 1. Lie on The Sleep Number Bed by Select Comfort
™
in your normal sleep position,
holding your remote.
STEP 2. Press any button on the remote to “wake” it up. (If using the wireless
remote with the L and R buttons, press L or R to choose a side.) It will
display the current Sleep Number
®
setting. If you have an idea of what
your Sleep Number
®
is, enter it on the remote by pressing the firmer
or softer buttons until the number you desire is displayed. The display
will go back to your current Sleep Number
®
and then the adjustment
will begin. The Sleep Number
®
and number of reference bars displayed
will change as the firmness changes. Remain still until the change is
complete. When the adjustment is complete, the Sleep Number
®
will
stay lit for 5 seconds and then the display will turn off.
If you decide to change your Sleep Number
®
before the firmness adjustment is complete, just press any
button and the Firmness Control
™
system will stop. Then, go to the Sleep Number
®
you want.
It sometimes takes several nights of sleeping at different settings to discover your ideal Sleep Number
®
.
If you would like to experiment further with your Sleep Number
®
setting, refer to the inside of page 13 in the
Owner’s Manual. Follow the step-by-step instructions for the Deluxe Sleep Number
®
Firmness Control System
™
.
1 Wireless Remote
Firmer (top button)
Softer (bottom button)
Firmness Control
™
system 9000
Memory
Wireless Remote
Recalling the Memory
• Press the “L" or “R" for the side you'd
like to recall.
• Press the MEM button 2 times within
5 seconds. The first time you press
MEM it will show you the Sleep
Number
®
currently in the memory
setting, the second time it will begin
changing the Sleep Number
®
to that
memory setting.
Wired Remote
Recalling the Memory
• Press the MEM button 2 times within
5 seconds. The first time you press
MEM it will show you the Sleep
Number
®
currently in the memory
setting, the second time it will begin
changing the Sleep Number
®
to that
memory setting.
Fill Feature
This feature will allow you to inflate one or both chambers to a Sleep Number
®
of 100.
Wireless Remote
To Fill Both Chambers
• Press and hold the FILL button for at
least 2 seconds.
The right chamber will fill to 100 then
the left chamber will fill to 100.
To Fill One Chamber
• Press any button to “wake up" the remote.
• Press “L" or “R" to determine side to fill.
• Press and hold the FILL button for at
least 2 seconds.
Wired Remote
• On one remote, press and hold the
FILL button for at least 2 seconds. This
chamber will begin filling immediately.
• To fill the second chamber, on the other
remote, press and hold the FILL button
for at least 2 seconds. This chamber will
fill to 100 when the first chamber is full.
To stop the fill feature at any time, press any button on the remote.
Wireless Remote
Setting the Memory
• Press the “L" or “R" to choose a
side and “wake up” the remote.
• Adjust the bed to the Sleep Number
®
you'd like as your memory setting.
• Once at the desired Sleep Number
®
,
press and hold the MEM button for
3 seconds.
• “Memory Set" will appear above the
Sleep Number
®
when it's set.
Wired Remote
Setting the Memory
• Press the up or down arrow to
“wake up" the remote.
• Adjust the bed to the Sleep Number
®
you'd like as your memory setting.
• Once at the desired Sleep Number
®
,
press and hold the MEM button for
3 seconds.
• “Memory Set" will appear above the
Sleep Number
®
when it's set.
Memory Feature more
This feature allows you to set your favorite Sleep Number
®
into memory and recall it at any time.
Follow these steps to change the memory setting at any time.
As the adjustment is taking place, the number displayed and tick marks will indicate
the change.
▲
Fill
Memory
Fill
Left/Right side buttons
© 2004 Select Comfort
106926
01/04
Class B Device Statement: (Section 15.105 (b) of the FCC Rules)
“Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Insert2_JR 3/9/04 1:31 PM Page 1